Casio Classic AMW860-8AV Handleiding

Casio Horloge Classic AMW860-8AV

Lees hieronder de 📖 handleiding in het Nederlandse voor Casio Classic AMW860-8AV (5 pagina's) in de categorie Horloge. Deze handleiding was nuttig voor 25 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/5

Operation Guide 2747/5574

E-9

Initial Screens

When you enter the Telememo, World Time, or Alarm Mode, the data you were

viewing when you last exited the mode appears first.

E-8

Auto Return Feature

The watch automatically returns to the Timekeeping Mode if you do not perform

any button operation for two or three minutes in the Telememo, Alarm, or Hand

Setting Mode.

If you leave a screen with flashing digits or a cursor on the display for two or three

minutes without performing any operation, the watch automatically exits the setting

screen.

Holding down for about one second in any mode jumps directly to theC

Timekeeping Mode. This operation does not work while a setting screen is on the

display.

Scrolling

The and buttons are used in various modes and setting screens to scrollB D

through data on the display. In most cases, holding down these buttons during a

scroll operation scrolls through the data at high speed.

E-7

Stopwatch Mode Hand Setting

Mode

Alarm Mode Countdown Timer

Mode

C C C

E-6

General Guide

Press C to change from mode to mode. After you perform an operation (except

for ) in any mode, pressing returns to the Timekeeping Mode.B C

To return to the Timekeeping Mode from any other mode, hold down C for about

one second.

Timekeeping Mode

World Time Mode Telememo Mode

C CC

E-5

Illumination . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-38

To turn on illumination . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-38

Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-39

Operating Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-41

User Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-52

E-4

World Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-25

To set the World Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-26

To view the time in another city code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-27

To toggle a city code time between

Standard Time and Daylight Saving Time . . . . . . . . . . . . . . . . . . . . . . . . . . E-28

Alarms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-29

To set an alarm time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-30

To test the alarm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-32

To turn an alarm and the Hourly Time Signal on and off . . . . . . . . . . . . . . . . . E-32

Countdown Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-34

To set the countdown start time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-34

To use the countdown timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-35

Stopwatch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-36

To measure times with the stopwatch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-37

E-3

Contents

About This Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-2

General Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-6

Timekeeping . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-10

To set the digital time and date . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-11

To toggle between 12-hour and 24-hour timekeeping . . . . . . . . . . . . . . . . . . E-14

To toggle the Timekeeping Mode digital time between

DST and Standard Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-15

To adjust the analog time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-16

Telememo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-17

To create a new Telememo record . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-18

To recall Telememo records . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-22

To edit a Telememo record . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-23

To delete a Telememo record . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-23

E-2

About This Manual

Depending on the model of your watch, display text

appears either as dark figures on a light background, or

light figures on a dark background. All sample displays

in this manual are shown using dark figures on a light

background.

Button operations are indicated using the letters shown

in the illustration.

Note that the product illustrations in this manual are

intended for reference only, and so the actual product

may appear somewhat different than depicted by an

illustration.

E-1

ENGLISH

Congratulations upon your selection of this CASIO watch.

To ensure that this watch provides you with the years of service for which it is

designed, carefully read and follow the instructions in this manual, especially the

information under “Operating Precautions” and “User Maintenance”.

Be sure to keep all user documentation handy for future reference.

Operation Guide 2747/5574

E-19

(space) A Z to @ to —0 9 to

DDD

BBB

You can input spaces, alpha characters, symbols, and numbers in a name. For

details, see the “Character List” at the back of this manual.

4. When the character you want is at the cursor position, press to move theC

cursor to the right.

5. Repeat steps 3 and 4 until the name is complete.

You can input up to eight characters for the name.

6. After you input the name, press as many times asC

necessary to move the cursor to the number field.

You can tell when you are in the name field because

of the long cursor (—). The number field has a short

cursor (

–

E-18

To create a new Telememo record

1. In the Telememo Mode, press and at the same B D

time to display the new data screen.

The new data screen shows , which indicates ———

that there is no text in the name field.

If the new data screen does not appear, it means that

memory is full. To store another record, you will first

have to delete some of the records stored in memory.

2. Hold down until the flashing cursor (A—) appears

in the name field of the display, which indicates the

setting screen.

3. Use and to change the character at the cursor D B

position in the name field. The character changes in

the following sequence.

New Data Screen

E-17

Telememo

Telememo lets you store up to 30records, each

containing name and telephone number data.

Records are automatically sorted based on the

characters of the name. You can recall records by

scrolling through them on the display.

A Telememo Mode record has a name field and a

number field.

See “Character List” at the back of this manual for

details on how the watch sorts records.

All of the operations in this section are performed in

the Telememo Mode, which you enter by pressing

C (page E-6).

Remaining memory

Record numberName

Number

E-16

To adjust the analog time

1. In the Timekeeping Mode, press six times to enter C

the Hand Setting Mode (page E-7).

2. Hold down until the current digital time starts to A

flash, which indicates the analog setting screen.

3. Press to advance the analog time setting by D

20seconds.

Holding down advances the analog time settingD

at high speed.

If you need to advance the analog time a long way, press at theD and B

same time. This locks the high speed hand movement, so you can release the

two buttons. High-speed hand movement continues until you press any button.

It will also stop automatically after the time advances 12hours or if an alarm

(daily alarm, Hourly Time Signal, or countdown alarm) starts to sound.

4. Press to exit the setting screen.A

x To return to the Timekeeping Mode, press C.

E-15

To toggle the Timekeeping Mode digital time between DST and Standard Time

1. In the Timekeeping Mode, hold down until the A

seconds start to flash, which indicates the setting

screen.

2. Press once to display the DST setting screen.C

3. Press to toggle between Daylight Saving Time D

(ON OFFdisplayed) and Standard Time ( displayed).

4. Press to exit the setting screen.A

The indicator appears on the Timekeeping, Alarm, and Hand Setting ModeDST

to indicate that Daylight Saving Time is turned on.

Setting the Analog Time

Perform the procedure below when the time indicated by the analog hands does

not match the time of the digital display.

E-14

To toggle between 12-hour and 24-hour timekeeping

In the Timekeeping Mode, press to toggle between 12-hour timekeeping D

(indicated by or on the display), or 24-hour timekeeping.A P

With the 12-hour format, the (PM) indicator appears on the display for times inP

the range of noon to 11:59 p.m. and the (AM) indicator appears for times in the A

range of midnight to 11:59 a.m.

With the 24-hour format, times are displayed in the range of 0:00 to 23:59, without

any indicator.

The 12-hour/24-hour timekeeping format you select in the Timekeeping Mode is

applied in all modes.

Digital Time Daylight Saving Time (DST) Setting

Daylight Saving Time (summer time) advances the digital time setting by one hour

from Standard Time. Remember that not all countries or even local areas use

Daylight Saving Time.

E-13

4. Press to exit the setting screen.A

Resetting the seconds only (without changing the hour, minute, or DST setting)

causes the analog minute hand setting to be adjusted automatically. If you

change the hour, minute, or DST setting, you should also use the procedure

under “To adjust the analog time” (page E-16) to adjust the analog hands

accordingly.

See “Digital Time Daylight Saving Time (DST) Setting” (page E-14) for details about

the DST setting.

Resetting the seconds to while the current count is in the range of 30 to00

59causes the minutes to be increased by 1. In the range of 00 to 29, the

seconds are reset to without changing the minutes.00

The day of the week is automatically displayed in accordance with the date

(year, month, and day) settings.

The year can be set in the range of 2000 to 2099.

The watch’s built-in full automatic calendar makes allowances for different

month lengths and leap years. Once you set the date, there should be no reason

to change it except after you have the watch’s battery replaced.

E-12

3. When the setting you want to change is flashing, use and to change it as B D

described below.

Screen To do this: Do this:

Reset the seconds to 00. Press D.

Toggle between Daylight Saving Time (ON)

and Standard Time ( ).OFF Press D.

Change the hour or minute.

Use (+) and (–).D B

Change the year.

Change the month or day.

E-11

Digital Time and Date

Use the Timekeeping Mode to set and view a digital display of the current time and

date. When setting the digital time, you can also configure settings for summer time

(Daylight Saving time or DST).

To set the digital time and date

1. In the Timekeeping Mode, hold down until the A

seconds start to flash, which indicates the setting

screen.

2. Press to move the flashing in the sequence shown C

below to select the other settings.

Seconds DST

Day

Hour

Month

Minutes

Year

CCC

E-10

Timekeeping

This watch features separate digital and analog timekeeping. The procedures for

setting the digital time (page E-11) and analog time (page E-15) are different.

In the Timekeeping Mode, press to toggle the display between the date screenA

and the time screen.

Date Screen Time Screen

Day of week

Month – Day

Hour : Minutes

Minutes PM indicator

Seconds

Hour

Operation Guide 2747/5574

E-29

Alarms

You can set three independent Daily Alarms. When an

alarm is turned on, the alarm tone sounds when the

alarm time is reached. One of the alarms is a snooze

alarm ( ).SNZ

You can turn on an Hourly Time Signal that causes the

watch to beep twice every hour on the hour.

There are four screens in the Alarm Mode. Three are for

the daily alarms ( , , and ), and one is forAL1 AL2 SNZ

the Hourly Time Signal ( ).SIG

All of the operations in this section are performed in the

Alarm Mode, which you enter by pressing (page E-7).C

Alarm time (Hour : Minutes)

AM indicator

E-28

To toggle a city code time between Standard Time and Daylight Saving Time

1. In the World Time Mode, use to display the city D

code whose Standard Time/Daylight Saving Time

setting you want to change.

2. Hold down until the DST On/Off setting of the world A

time starts to flash, which indicates the setting screen.

3. Press to toggle between Daylight Saving Time (DON

displayed) and Standard Time ( displayed).OFF

4. Press to exit the setting screen.A

The indicator appears on the World Time Mode display to indicate thatDST

Daylight Saving Time is turned on.

The above operation toggles all World Time city codes between Daylight Saving

Time and Standard Time. Note that you cannot make settings for individual city

codes.

E-27

4. While a setting is flashing, use and to change it.D B

Pressing D and B at the same time while any World Time setting is flashing

causes the displayed time to change to the same setting as the current

Timekeeping Mode time.

While DST On/Off setting is selected (flashing), press to toggle betweenD

Daylight Saving Time ( ) and Standard Time ( ).ON OFF

While the hour or minutes setting is selected (flashing), use (+) and (–) toD B

change it.

5. Press to exit the setting screen.A

To view the time in another city code

In the World Time Mode, press to scroll through city codes.D

E-26

If your location is not included in the preset city codes, select the preset city code

that is in the same time zone as your location.

For full information on city codes, see the “City Code Table” at the back of this

manual.

To set the World Time

1. In the World Time Mode, press to scroll throughD

city codes.

2. Hold down until the DST On/Off setting of the world A

time starts to flash, which indicates the setting screen.

3. Press to move the flashing in the sequence shown C

below to select the other settings.

DST Hour Minutes

C C

E-25

World Time

World Time digitally displays the current time in 30cities

(29time zones) around the world.

All of the operations in this section are performed in

the World Time Mode, which you enter by pressing

C (page E-6).

World Time

The time settings of the Timekeeping Mode and the

World Time Mode are independent of each other, so

you must make separate settings for each. This watch

is preset with a number of city codes, each of which

represents the time zone where that city is located.

Whenever you change the time setting for any city in the World Time Mode, the

settings of all other cities are changed accordingly.

Current time for the selected

city code

City code

E-24

3. Press and at the same time to delete the record.B D

CLR appears to indicate that the record is being deleted. After the record is

deleted, the cursor appears on the display, ready for input.

4. Input data or press to return to the Telememo record screen.A

E-23

To edit a Telememo record

1. In the Telememo Mode, use to scroll through the records and display the one D

you want to edit.

2. Hold down until the flashing cursor appears on the display.A

3. Use to move the flashing to the character you want to change.C

4. Use and to change the character.B D

For details on inputting characters, see “To create a new Telememo record”

(step 3 for name input and 7 for number input).

5. After making the changes that you want, press to store them and return to theA

Telememo record screen.

To delete a Telememo record

1. In the Telememo Mode, use to scroll through the records and display the one D

you want to delete.

2. Hold down until the flashing cursor appears on the display.A

E-22

To recall Telememo records

In the Telememo Mode, press (+) to scroll through Telememo records on the D

display.

Only name data appears when you scroll through Telememo records.

Press A to toggle the screen between the name and number fields.

Name Number

The name and number scroll from right to left on the display. A separator ( s) is

inserted between the last character and first character of the data.

Pressing D while the last Telememo record is on the display causes the new data

screen to appear.

E-21

10. Press to store your data and return to the Telememo record screen (without A

the cursor).

After you press A to store data, the name flashes for about one second to

indicate that records are being sorted.

Note that a record must have something input in the name field, otherwise you

will not be able to store it.

E-20

The name field has spaces for eight characters, so you must press to move C

past the 8th character in order to get to the number field.

The number field has spaces for 16 digits. Pressing until the cursor movesC

past the 16th digit causes it to jump back to the first character of the name field.

7. Use and to change the character at the cursor position in the number D B

field. The character changes in the following sequence.

(space) to 0 9 ( +

)–

D D DD D

B B BB B

8. When the character you want is at the cursor position, press to move the C

cursor to the right.

9. Repeat steps 7 and 8 until you complete number input.

x You can input up to 16 digits for the number.

Product specificaties

Merk:	Casio
Categorie:	Horloge
Model:	Classic AMW860-8AV
Type horloge:	Armbandhorloge
Mechanismetype:	Elektronisch
Type wijzerplaat horloge:	Led-wijzerplaat
Waterdicht:	Ja
Stopwatch:	Ja
Countdown timer:	Ja
Waterbestendig diepte:	50 m
Wereldklok functie:	Ja
Alarm functie:	Ja
Agenda:	Ja
Nauwkeurigheid stopwatch:	100 s
Kleur behuizing:	Zwart
Hoofdkleur van band:	Zwart
Geslacht:	Unisex
Levensduur batterij/accu:	10 jaar