Casio Baby-G BA-130-7A1ER Handleiding
Lees hieronder de 📖 handleiding in het Nederlandse voor Casio Baby-G BA-130-7A1ER (6 pagina's) in de categorie Horloge. Deze handleiding was nuttig voor 16 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/6
Operation Guide 5607
E-9
x In any mode (except when a setting mode, with flashing digits is on the display),
press to illuminate the display.B
C
Stopwatch Mode Countdown Timer Mode Alarm Mode
C C
E-8
Selecting a Mode
x Press C to cycle between the modes as shown below.
Timekeeping Mode World Time Mode
CC
E-7E-6
Mode Reference Guide
The mode you should select depends on what you want to do.
To do this: Enter this mode: See:
x View the current date in the Home City
x Configure Home City and daylight saving time (DST)
settings
x Configure time and date settings
x Select 12-hour or 24-hour timekeeping
x Adjust the analog hands
Timekeeping Mode E-11
View the current time in one of 48 cities
(29 time zones) around the globe World Time Mode E-19
Set an alarm time Alarm Mode E-21
Use the stopwatch to measure elapsed time Stopwatch Mode E-25
Use the countdown timer Countdown Timer Mode E-28
E-5
To perform a countdown timer operation ..................................................... E-30
To stop the alarm .......................................................................................... E-30
Adjusting the Analog Hand Setting .................................................................E-31
To adjust the analog time ............................................................................. E-31
Illumination ....................................................................................................... E-33
To turn on illumination .................................................................................. E-33
Button Operation Tone ....................................................................................E-34
To turn the button operation tone on and off ................................................ E-34
Troubleshooting ............................................................................................... E-35
Main Indicators ................................................................................................ E-36
Specifications ................................................................................................... E-38
Operating Precautions .....................................................................................E-40
User Maintenance ............................................................................................E-51
E-4
To specify standard time or daylight saving time (DST) for a city ................. E-20
Using the Alarm ................................................................................................ E-21
To enter the Alarm Mode .............................................................................. E-21
To set an alarm time ..................................................................................... E-22
To test the alarm ........................................................................................... E-23
To turn an alarm and the Hourly Time Signal on and off ............................... E-23
To stop the alarm .......................................................................................... E-24
Using the Stopwatch .......................................................................................E-25
To enter the Stopwatch Mode ...................................................................... E-25
To perform an elapsed time operation .......................................................... E-26
To pause at a split time ................................................................................. E-26
To measure two finishes ............................................................................... E-26
Countdown Timer.............................................................................................E-28
To enter the Countdown Timer Mode ........................................................... E-28
To configure the countdown timer ................................................................ E-29
E-3
Contents
About This Manual .............................................................................................E-1
Things to check before using the watch ..........................................................E-2
Mode Reference Guide ...................................................................................... E-6
Timekeeping ..................................................................................................... E-11
Configuring Home City Settings ..................................................................... E-12
To configure Home City settings .................................................................. E-12
To change the Daylight Saving Time (summer time) setting ......................... E-14
Adjusting the Digital Time and Date Settings ................................................E-15
To configure the digital time and date settings ............................................. E-15
Checking the Current Time in a Different Time Zone ...................................E-19
To enter the World Time Mode ..................................................................... E-19
To view the time in another time zone .......................................................... E-19
E-2
Things to check before using the watch
1. Check the Home City and the daylight saving time (DST) setting.
Use the procedure under “To configure Home City settings” (page E-12) to
configure your Home City and daylight saving time settings.
Important!
x Proper World Time Mode data depend on correct Home City, time, and date
settings in the Timekeeping Mode. Make sure you configure these settings
correctly.
2. Set the current time.
x See “Adjusting the Digital Time and Date Settings” (page E-15).
The watch is now ready for use.
E-1
About This Manual
x Depending on the model of your watch, display text
appears either as dark figures on a light background, or
light figures on a dark background. All sample displays
in this manual are shown using dark figures on a light
background.
x Button operations are indicated using the letters shown in
the illustration.
x Note that the product illustrations in this manual are
intended for reference only, and so the actual product
may appear somewhat different than depicted by an
illustration.
E
ENGLISH
Congratulations upon your selection of this CASIO watch.
To ensure that this watch provides you with the years of service for which it is
designed, carefully read and follow the instructions in this manual, especially the
information under “Operating Precautions” and “User Maintenance”.
MA1903-EA © 2019 CASIO COMPUTER CO., LTD.
Operation Guide 5607
E-19
Checking the Current Time in a Different Time Zone
You can use the World Time Mode to view the current
time in one of 29 time zones (48 cities) around the globe.
The city that is currently selected in the World Time
Mode is called the “World Time City”.
To enter the World Time Mode
Use to select the World Time Mode as shown on C
page E-8.
To view the time in another time zone
In the World Time Mode, use (East) to scroll through D
city codes.
Current time in the currently
selected World Time City
Currently selected
World Time City
E-18
Note
x For information about selecting a Home City and configuring the DST setting, see
“Configuring Home City Settings” (page E-12).
x While 12-hour format is selected for timekeeping, a indicator will appear for PM
times from noon to 11:59 p.m. No indicator appears for times from midnight to
11:59 a.m. With 24-hour format, time is displayed from 0:00 to 23:59, without any
PM indicator.
x The watch’s built-in full automatic calendar makes allowances for different month
lengths and leap years. Once you set the date, there should be no reason to
change it except after you have the watch’s battery replaced.
x The day of the week changes automatically when the date changes.
E-17
3. When the timekeeping setting you want to change is flashing, use and/or D B
to change it as described below.
Screen To do this: Do this:
Reset the seconds to 00 Press D.
Toggle between Daylight Saving Time
( )ON OFF) and Standard Time ( Press D.
Change the city code Use (East) and (West).D B
Change the hour or minute Use (+) and (–).D B
Toggle between 12-hour ( ) and 12H
24-hour ( ) timekeeping24H Press D.
Change the year, month, or day Use (+) and (–).D B
4. Press to exit the setting mode.A
E-16
2. Press to move the flashing in the sequence shown below to select the other C
settings.
Time and Date
Seconds
C
DST
C
Home City Code
C
Hour
C C
Day CMonth CYear C12/24-Hour Format CMinute
x The following steps explain how to configure timekeeping settings only.
E-15
Adjusting the Digital Time and Date Settings
Use the procedure below to adjust the digital time and date settings.
To configure the digital time and date settings
1. In the Timekeeping Mode, hold down for at least A
two seconds until the seconds start to flash. This is the
setting mode.
Seconds
E-14
To change the Daylight Saving Time (summer time) setting
1. In the Timekeeping Mode, hold down for at least A
two seconds until the seconds start to flash. This is the
setting mode.
2. Press to display the DST setting mode.C
3. Press to toggle between Daylight Saving Time (DON)
and Standard Time ( ).OFF
4. After the setting is the way you want, press to A
return to the Timekeeping Mode.
x The indicator appears to indicate that Daylight DST
Saving Time is turned on.
DST indicator
E-13
2. Press twice to move the flashing to the city code.C
x For details about city codes, see the “City Code
Table” at the back of this manual.
3. Press (East) and (West) to select the city code D B
you want to use as your Home City.
4. After the setting is the way you want, press to A
return to the Timekeeping Mode.
Note
x After you specify a city code, the watch will use UTC* offsets in the World Time
Mode to calculate the current time for other time zones based on the current time
in your Home City.
* Coordinated Universal Time, the world-wide scientific standard of timekeeping.
The reference point for UTC is Greenwich, England.
City Code
E-12
Configuring Home City Settings
There are two Home City settings: actually selecting the Home City, and selecting
either standard time or daylight saving time (DST).
To configure Home City settings
1. In the Timekeeping Mode, hold down for at least A
two seconds until the seconds start to flash. This is the
setting mode.
x The watch will exit the setting mode automatically if
you do not perform any operation for about two or
three minutes.
Seconds
E-11
Timekeeping
Use the Timekeeping Mode to set and view the current time and date.
x Each press of D toggles the digital display between the two formats shown
nearby.
D
Hour PM indicatorMinutes
Month-Day Hour : Minutes Day of the week Seconds
E-10
General Functions (All Modes)
The functions and operations described in this section can be used in all of the
modes.
Auto Return Features
If you leave a setting mode with flashing digits on the display for two or three
minutes without performing any operation, the watch exits the setting mode
automatically.
Initial Screens
When you enter the World Time Mode or Alarm Mode, the data you were viewing
when you last exited the mode appears first.
Scrolling
The and buttons are used on the setting mode to scroll through data on the B D
display. In most cases, holding down these buttons during a scroll operation scrolls
through the data at high speed.
Operation Guide 5607
E-29
To configure the countdown timer
1. While the countdown start time is on the display in
the Countdown Timer Mode, hold down until the A
current countdown start time starts to flash, which
indicates the setting mode.
x If the countdown start time is not displayed, use the
procedure under “To perform a countdown timer
operation” (page E-30) to display it.
2. Press to move the flashing in the sequence shown C
below to select other settings.
Start Time (hours) Start Time (minutes)
C
E-28
Countdown Timer
The countdown timer can be set within a range of
one minute to 24hours. An alarm sounds when the
countdown reaches zero.
To enter the Countdown Timer Mode
Use to select the Countdown Timer Mode as shown C
on page E-9.
Hours
Seconds
Minutes
E-27
Note
x The Stopwatch Mode can indicate elapsed time up to 23hours, 59minutes,
59.99seconds.
x Once started, stopwatch timing continues until you press to stop it, even if D
you exit the Stopwatch Mode to another mode and even if timing reaches the
stopwatch limit defined above.
x Exiting the Stopwatch Mode while a split time is frozen on the display clears the
split time and returns to elapsed time measurement.
E-26
To perform an elapsed time operation
D D D D A
Start Stop (Restart) (Stop) Reset
To pause at a split time
D A A D A
Start Split
(SPL displayed)
Split release Stop Reset
To measure two finishes
DADAA
Start Split
(SPL displayed)
First runner finishes.
Display time of first
runner.
Stop
Second runner
finishes.
Split release
Display time of
second runner.
Reset
E-25
Using the Stopwatch
The stopwatch measures elapsed time, split times, and two finishes.
To enter the Stopwatch Mode
Use to select the Stopwatch Mode as shown on page C
E-9.
Seconds
SplitHours
Minutes
1/100 Seconds
E-24
To stop the alarm
Press any button.
NOTE
x In the case of the snooze alarm, the alert operation is performed a total of seven
times, every five minutes, until you turn the alarm off.
x Performing any one of the following operations during a 5-minute interval between
snooze alarms cancels the current snooze alarm operation.
− Displaying the Timekeeping Mode setting screen
− Displaying the snooze alarm setting screen
E-23
5. Press to exit the setting mode.A
To test the alarm
In the Alarm Mode, hold down to sound the alarm.D
To turn an alarm and the Hourly Time Signal on and off
In the Alarm Mode, use to select an alarm or the D
Hourly Time Signal.
x When the alarm you want or the Hourly Time Signal
is displayed, press to toggle it between on (“AOn”
displayed) and off (“ ” displayed).OFF
x The alarm on indicator (when any alarm is on), snooze
alarm on indicator (when the snooze alarm is on), and
the Hourly Time Signal on indicator (when the Hourly
Time Signal is on) are shown on the display in all modes.
Snooze alarm on indicator
Hourly time signal on
indicator
E-22
To set an alarm time
1. In the Alarm Mode, use to scroll through the alarm D
screens until the one whose time you want to set is
displayed.
AL1 AL3 SNZAL2 AL4 SIG
D D DD D
D
2. Hold down for at least two seconds until the alarm time starts to flash. This is A
the setting mode.
3. Press to move the flashing between the hour and minute settings.C
4. While a setting is flashing, use (+) and (–) to change it.D B
x When setting the alarm time using the 12-hour format, take care to set the time
correctly as a.m. (no indicator) or p.m. ( indicator).PM
Alarm on indicator
E-21
Using the Alarm
When an alarm is turned on, the alarm tone will sound
when its alarm time is reached. One of the alarms is a
snooze alarm, while the other four are daily alarms. The
snooze alarm operation will repeat every five minutes,
up to seven times. You also can turn on an Hourly Time
Signal that causes the watch to beep twice every hour
on the hour.
To enter the Alarm Mode
Use to select the Alarm Mode as shown on page C
E-9.
x The snooze alarm screen is indicated by , while the SNZ
other alarm screens are numbered through AL1 AL4.
The Hourly Time Signal screen is indicated by SIG.
Alarm time
(Hour : Minutes)
Alarm number
E-20
To specify standard time or daylight saving time (DST) for a city
1. In the World Time Mode, use (East) to display the D
city code (time zone) whose Standard Time/Daylight
Saving Time setting you want to change.
2. Hold down for at least two seconds.A
x This toggles the city code you selected in step1
between Daylight Saving Time ( indicator DST
displayed) and standard time ( indicator not DST
displayed).
x You cannot use the World Time Mode to change the DST setting of the city
currently selected as your Home City in the Timekeeping Mode.
x Note that you cannot switch between standard time/daylight saving time (DST)
while is selected as the World Time City.UTC
x The standard time/daylight saving time (DST) setting affects only the currently
selected time zone. Other time zones are not affected.
DST indicator
Product specificaties
| Merk: | Casio |
| Categorie: | Horloge |
| Model: | Baby-G BA-130-7A1ER |
Heb je hulp nodig?
Als je hulp nodig hebt met Casio Baby-G BA-130-7A1ER stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Horloge Casio
20 April 2024
20 April 2024
20 Maart 2024
16 Maart 2024
16 Maart 2024
16 Maart 2024
16 Maart 2024
16 Maart 2024
16 Maart 2024
16 Maart 2024
Handleiding Horloge
- Horloge Braun
- Horloge IKEA
- Horloge Epson
- Horloge Huawei
- Horloge Garmin
- Horloge Medion
- Horloge Topcom
- Horloge Ade
- Horloge Adidas
- Horloge Alessi
- Horloge Alpina
- Horloge Armani
- Horloge Ascot
- Horloge Asics
- Horloge Auriol
- Horloge Beper
- Horloge BML
- Horloge Boss
- Horloge Bruno Sohnle
- Horloge Bulova
- Horloge Bushnell
- Horloge Dakota
- Horloge Danish Design
- Horloge Davis
- Horloge Detomaso
- Horloge Diesel
- Horloge Digi-tech
- Horloge Easypix
- Horloge Ebel
- Horloge Edox
- Horloge ELYSEE
- Horloge ESQ
- Horloge ETA
- Horloge Eurochron
- Horloge Ferrari
- Horloge Festina
- Horloge Fila
- Horloge Fitbit
- Horloge Fossil
- Horloge Freestyle
- Horloge GC Watches
- Horloge Geemarc
- Horloge Guess
- Horloge Habitat
- Horloge Haffstreuner
- Horloge Hamilton
- Horloge Hugo Boss
- Horloge ICE Watch
- Horloge Inter-Quartz
- Horloge Invicta
- Horloge Irox
- Horloge Kalenji
- Horloge Karlsson
- Horloge Kogan
- Horloge Krontaler
- Horloge La Crosse
- Horloge Lambretta
- Horloge Longines
- Horloge Lorus
- Horloge Lotus
- Horloge Lynx
- Horloge Marc Jacobs
- Horloge Marquant
- Horloge Meister Anker
- Horloge Michael Kors
- Horloge Misfit
- Horloge Mitsubishi
- Horloge Mondaine
- Horloge Movado
- Horloge Naitica
- Horloge Naviforce
- Horloge Nedis
- Horloge Nike
- Horloge Polar
- Horloge Pulsar
- Horloge Pyle
- Horloge QQ
- Horloge Rado
- Horloge Renkforce
- Horloge Rodania
- Horloge Rolex
- Horloge Ronda
- Horloge Seiko
- Horloge Sempre
- Horloge Sinn
- Horloge Skmei
- Horloge Slazenger
- Horloge Speedo
- Horloge Spinnaker
- Horloge Stuhrling
- Horloge Suunto
- Horloge Swatch
- Horloge Tauchmeister
- Horloge TCM
- Horloge Technaxx
- Horloge Ticwatch
- Horloge Timer
- Horloge TimeStyle
- Horloge Timex
- Horloge Tissot
- Horloge Tommy Hilfiger
- Horloge TomTom
- Horloge Torgoen
- Horloge TW Steel
- Horloge Uri Minkoff
- Horloge Velleman
- Horloge Westfalia
- Horloge World Timer Chronograph
- Horloge Xonix
- Horloge Jaguar
- Horloge Junghans
- Horloge Just
- Horloge Olivia Burton
- Horloge Omega
- Horloge Oregon Scientific
- Horloge Orient
- Horloge Clas Ohlson
- Horloge Crivit
- Horloge Zenith
- Horloge Citizen
- Horloge Prologue
- Horloge Swiza
- Horloge Victorinox
- Horloge Bering
- Horloge Breitling
- Horloge Breo
- Horloge Brera
- Horloge Calypso
- Horloge Certina
- Horloge Christiaan Van Der Klaauw
- Horloge Christopher Ward
- Horloge Cover
- Horloge Daniel Steiger
- Horloge DMC
- Horloge Dugena
- Horloge Executive
- Horloge Gant
- Horloge Girard-Perregaux
- Horloge Holzkern
- Horloge Hublot
- Horloge HYT
- Horloge IWC
- Horloge Jacques Lemans
- Horloge Lars Larsen
- Horloge Lucien Picard
- Horloge Luminox
- Horloge Maurice Lacroix
- Horloge Nautica
- Horloge Obaku
- Horloge Philip Watch
- Horloge Pilgrim
- Horloge Puma
- Horloge Shinola
- Horloge Skagen
- Horloge So & Co
- Horloge Tikkers
- Horloge Timberland
- Horloge TMI
- Horloge Triwa
- Horloge Tudor
- Horloge Versace
- Horloge WoodWatch
- Horloge Leff
- Horloge ETT
- Horloge Emporio Armani
- Horloge La Crosse Technology
- Horloge Spin Master
- Horloge Raketa
- Horloge Balmain
- Horloge Audemars Piguet
- Horloge Wonky Monkey
- Horloge Iron Annie
- Horloge Julie Julsen
- Horloge KRAEK
- Horloge X-WATCH
- Horloge PAUL HEWITT
- Horloge MICHELE
- Horloge Radley London
- Horloge PANERAI
- Horloge Zeppelin
- Horloge Hype
Nieuwste handleidingen voor Horloge
21 April 2024
21 April 2024
10 April 2024
10 April 2024
10 April 2024
10 April 2024
10 April 2024
10 April 2024
10 April 2024