Casio 5475 Handleiding

Casio Horloge 5475

Lees hieronder de 📖 handleiding in het Nederlandse voor Casio 5475 (6 pagina's) in de categorie Horloge. Deze handleiding was nuttig voor 18 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/6
Operation Guide 5475
MO1510-EA © 2015 CASIO COMPUTER CO., LTD.
E-1
ENGLISH
Congratulations upon your selection of this CASIO watch.
E-2
About This Manual
Depending on the model of your watch, display text
appears either as dark fi gures on a light background, or
light fi gures on a dark background. All examples in this
manual are shown using dark fi gures on a light
background.
Button operations are indicated using the letters shown
in the illustration.
Note that the product illustrations in this manual are
intended for reference only, and so the actual product
may appear somewhat different than depicted by an
illustration.
E-3
Things to check before using the watch
1. Check the Home City and the daylight saving time (DST) setting.
Use the procedure under “To confi gure Home City settings” (page E-14) to confi gure
your Home City and daylight saving time settings.
Important!
Proper World Time Mode data depends on correct Home City, time, and date settings
in the Timekeeping Mode. Make sure you confi gure these settings correctly.
2. Set the current time.
See “Confi guring Current Time and Date Settings” (page E-17).
The watch is now ready for use.
E-4
Contents
About This Manual …………………………………………………………………… E-2
Things to check before using the watch ………………………………………… E-3
Mode Reference Guide ……………………………………………………………… E-7
Timekeeping ……………………………………………………………………………E-12
Confi guring Home City Settings ……………………………………………………E-14
To con gure Home City settings ………………………………………………E-14
To change the daylight saving time (summer time) setting…………………E-16
Confi guring Current Time and Date Settings ……………………………………E-17
To change the current time and date settings ………………………………E-17
Hand Home Position Adjustment …………………………………………………E-21
To adjust home positions ………………………………………………………E-21
Checking the Current Time in a Different Time Zone ……………………………E-24
To enter the World Time Mode ………………………………………………E-25
E-5
To con gure World Time City and summer time settings …………………E-26
To swap your Home Time and World Time Cities …………………………E-28
Using the Stopwatch …………………………………………………………………E-29
To enter the Stopwatch Mode …………………………………………………E-29
To perform an elapsed time operation ………………………………………E-29
To pause at a split time …………………………………………………………E-30
To measure two nishes ………………………………………………………E-30
Using the Countdown Timer …………………………………………………………E-32
To enter the Countdown Timer Mode …………………………………………E-32
To specify the countdown start time …………………………………………E-32
To perform a countdown timer operation ……………………………………E-33
To stop the alarm ………………………………………………………………E-34
Using the Alarm ………………………………………………………………………E-35
To enter the Alarm Mode ………………………………………………………E-35
To set an alarm time ……………………………………………………………E-36
To test the alarm ………………………………………………………………E-37
E-6
To turn an alarm and the Hourly Time Signal on and off……………………E-38
To stop the alarm ………………………………………………………………E-38
Illumination ……………………………………………………………………………E-39
To illuminate the display manually ……………………………………………E-39
To change the illumination duration …………………………………………E-40
To enable or disable auto light…………………………………………………E-42
Button Operation Tone ………………………………………………………………E-44
To enable or disable the button operation tone ……………………………E-44
Low Battery Indication ………………………………………………………………E-46
Troubleshooting ………………………………………………………………………E-48
Specifi cations …………………………………………………………………………E-50
E-7
Mode Reference Guide
The mode you should select depends on what you want to do.
To do this: Enter this mode: See:
View the current date in the Home City
Confi gure Home City and daylight saving time (DST)
settings
Confi gure time and date settings
Timekeeping Mode E-12
View the current time in one of 48 cities (31 time zones)
around the globe World Time Mode E-24
Use the stopwatch to measure elapsed time Stopwatch Mode E-29
Use the countdown timer Countdown Timer Mode E-32
Set an alarm time
Turn the hourly time signal on or off Alarm Mode E-35
E-8
Selecting a Mode
The illustration below shows which buttons you need to press to navigate between
modes.
World Time ModeStopwatch Mode
Countdown Timer Mode Alarm Mode
World Time ModeStopwatch Mode
Countdown Timer Mode Alarm Mode
E-9
To return to the Timekeeping Mode from any other mode, hold down
C for about
two seconds.
The mode dial hand indicates the watch’s current mode.
Timekeeping Mode
Mode dial hand
Timekeeping Mode
Mode dial hand
Operation Guide 5475
E-10
General Functions (All Modes)
The functions and operations described in this section can be used in all of the modes.
Direct Timekeeping Mode Access
To enter the Timekeeping Mode from any other mode, hold down
C for about two
seconds.
Auto Return Features
The watch will automatically return to the Timekeeping Mode if you do not perform
any button operation for a particular amount of time in each mode.
Mode Name Approximate Elapsed Time
Alarm 3 minutes
Setting screen (digital setting fl ashing) 3 minutes
Initial Screens
When you enter the Alarm or World Time Mode, the data you were viewing when you
last exited the mode appears fi rst.
E-11
Scrolling
The D and B buttons are used on the setting screen to scroll through data on the
display. In most cases, holding down these buttons during a scroll operation scrolls
through the data at high speed.
Digital Meter
The digital meter indicates the seconds count in the Timekeeping Mode (page
E-12), World Time Mode (page E-24), and Timer Mode (page E-32). In the
Stopwatch Mode (page E-29) it indicates the 1/10-second count.
Digital MeterDigital Meter
E-12
Timekeeping
Use the Timekeeping Mode to set and view the current time and date.
Day of week
Month Day
Hour hand
Second hand
Digital meter Minute hand
Mode dial hand
E-13
Each press of A in the Timekeeping Mode will change screen contents as shown
below.
PM indicator
Month-Day Hour : Minutes Seconds
E-14
Confi guring Home City Settings
There are two Home City settings: actually selecting the Home City and selecting
either standard time or daylight saving time (DST).
To confi gure Home City settings
1. In the Timekeeping Mode, hold down A until ADJ
appears in the lower display.
When you release A (after ADJ appears), SET will
be ashing in the upper display. This is the setting
mode.
The watch will exit the setting mode automatically if
you do not perform any operation for about two or
three minutes.
2. Use D (East) and B (West) to scroll through the
available city codes.
For details about city codes, see the “City Code
Table” at the back of this manual.
City codeCity code
E-15
3. Press C.
This will cause DST to appear in the upper display
and the DST setting of the currently selected Home
City to appear in the lower display.
4. Press D to toggle the DST setting between daylight
saving time (
ON) and standard time (
OFF).
Note that you cannot switch between standard
time and daylight saving time (DST) while UTC is
selected as your Home City.
5. After all of the settings are the way you want, press A to exit the setting screen.
The DST indicator appears to indicate that daylight saving time is turned on.
Note
After you specify a city code, the watch will use UTC* offsets in the World Time
Mode to calculate the current time for other time zones based on the current
time in your Home City.
* Coordinated Universal Time, the world-wide scientifi c standard of timekeeping.
The reference point for UTC is Greenwich, England.
DST indicatorDST indicator
E-16
To change the daylight saving time (summer time) setting
1. In the Timekeeping Mode, hold down A until ADJ
appears in the lower display.
When you release A (after ADJ appears), SET will
be ashing in the upper display.
2. Press C
.
This will cause DST to appear in the upper display
and the DST setting of the currently selected Home
City to appear in the lower display.
3. Press D to toggle the DST setting between daylight saving time (
ON ) and standard
time (
OFF ).
4. After all of the settings are the way you want, press A to exit the setting screen.
The DST indicator appears to indicate that daylight saving time is turned on.
E-17
Confi guring Current Time and Date Settings
You can use the procedure below to adjust the Timekeeping Mode time and date
settings if they are off.
Changing the digital Home City data should cause the analog time setting to change
accordingly. If the analog time does not indicate the digital time, check the home
positions of the hands and make adjustments if necessary (page E-21).
To change the current time and date settings
1. In the Timekeeping Mode, hold down A until ADJ
appears in the lower display.
When you release A (after ADJ appears), SET will
be fl ashing in the upper display.
City CodeCity Code
E-18
2. Press C to move the fl ashing in the sequence shown below to select the other
settings.
City Code
(page E-14)
DST
(page E-16)
Illumination
Duration
(page E-40)
Button Operation
Tone On/Off
(page E-44)
Day Month
12/24-Hour
Format Seconds Hour
Year
Minutes
E-19
3. When the timekeeping setting you want to change is fl ashing, use D and/or B
to
change it as described below.
Screen To do this: Do this:
Change the city code See page E-14.
Toggle between daylight saving time (
ON)
and standard time (
OFF). See page E-14.
Toggle between 12-hour (
12H ) and 24-hour
(24H) timekeeping. Press D.
Reset the seconds to
00
(If the current seconds count is between 30
and 59, one is added to the minute count).
Press D.
Change the hour or minutes
Use D (+) and B (–).
Change the year, month, or day
Operation Guide 5475
E-20
4. After all of the settings are the way you want, press A to exit the setting screen.
Note
For information about selecting a Home City and confi guring the DST setting,
see “Confi guring Home City Settings” (page E-14).
While the 12-hour format is selected for timekeeping, a P (PM) indicator will
appear for times from noon to 11:59 p.m. No indicator appears for times from
midnight to 11:59 a.m. With 24-hour format, time is displayed from 0:00 to
23:59, without any P (PM) indicator.
The watch’s built-in full automatic calendar makes allowances for different
month lengths and leap years. Once you set the date, there should be no
reason to change it except after you have the watch’s battery replaced.
The day of the week changes automatically when the date changes.
Refer to the pages shown below for more information on Timekeeping Mode
settings.
- Button operation tone on/off: “To enable or disable the button operation tone”
(page E-44)
- Illumination duration setting: “To change the illumination duration” (page E-40)
E-21
Hand Home Position Adjustment
Strong magnetism or impact can cause the hands of the watch to go out of alignment.
Home position adjustment is not necessary when the analog time and digital time
are the same time in the Timekeeping Mode.
To adjust home positions
1. In the Timekeeping Mode, hold down A and keep it
depressed for about fi ve seconds until H.SET appears
on the lower display.
When you release A after H.SET appears, the
second hand will move to 12 o’clock. This indicates
the second hand home position adjustment mode.
Though ADJ will appear in the lower display about
two seconds after you hold down A, do not release
the button yet. Keep it depressed until H.SET
appears.
E-22
Use the C button to select a hand for adjustment. Each press of C cycles
in sequences from the second hand, to the hour and minute hands, and then
the mode dial hand. Selecting a hand causes it to move to 12 o’clock and the
content of the upper display changes as shown in the table below.
Upper display Selected hand
Flashing 00 Second hand
Flashing 0:00 Hour and minute hands
Flashing Sub Mode dial hand
If the selected hand does not move exactly to 12 o’clock, perform step 2 below
to adjust it.
The watch will return to regular timekeeping automatically if you do not perform
any operation for about two or three minutes. Any changes you have made to
settings up to that point will be saved.
E-23
2. Use D (+) and B (–) to adjust the position of the currently selected hand.
Holding down either button will cause the hand to move at high speed. Once
started, high-speed hand movement will continue even if you release the
button. To stop high-speed hand movement, press any button.
The second hand and mode dial hand will automatically stop high-speed
movement after they complete one revolution. The minute hand will stop
automatically after 12 revolutions.
3. Press A to exit home position correction and return to regular timekeeping.
Note
After performing home position adjustment, enter the Timekeeping Mode and check to
make sure that the analog hands and the upper display indicate the same time. If they
do not, perform home position adjustment again.
E-24
Checking the Current Time in a Different Time Zone
You can use the World Time Mode to view the current time in one of 31 time zones (48
cities) around the globe. The city that is currently selected in the World Time Mode is
called the “World Time City”.
You also can swap the current World Time City and Home Time City in the World
Time Mode (page E-27).
E-25
To enter the World Time Mode
Use C to select the World Time Mode as shown on page
E-8.
The mode dial hand will point to WT, and the current
city code and city name will scroll across the lower
display. After that, the city code will remain shown in
the lower display. You can scroll the city code and city
name again by pressing A.
The hour, minute, and second hands will indicate the
current Timekeeping Mode time.
Currently selected
World Time City
Current time in the currently
selected World Time City
Currently selected
World Time City
Current time in the currently
selected World Time City
E-26
To confi gure World Time City and summer time settings
1. In the World Time Mode, use D (East) to scroll through
city codes.
For details about city codes, see the “City Code
Table” at the back of this manual.
Pressing down B and D at the same time will
jump to the UTC city code.
2. To toggle between summer time (DST in the upper
display) and standard time (
DST not displayed), hold
down A.
Using the World Time Mode to change the DST
setting of the city code that is selected as your
Home City also will change the Timekeeping Mode
time DST setting.
Note that you cannot switch between standard time/
daylight saving time (DST) while UTC is selected as
the World Time City.
DST indicator
Hold down A
DST indicator
Hold down A
E-27
Note that the standard time/daylight saving time (DST) setting affects only the
currently selected time zone. Other time zones are not affected.
Swapping the Home City and World Time City
You can use the procedure below to swap your Home Time City with your World Time
City. This function comes in handy for those who often travel between two different
time zones.
You need to confi gure starting Home City and World Time City settings before
performing the procedure below.
To confi gure Home City settings (page E-14)
To confi gure World Time City and summer time settings (page E-26)
E-28
To swap your Home Time and World Time Cities
Press A and B at the same time.
This causes the Home City time (indicated by the main hour and minute hands) and
the World Time City time (shown on the display) to be swapped with each other.
$ % and
Home City [TYO] Time
Current World Time
City and Time
Home City [NYC] Time
New World Time
City and Time
E-29
Using the Stopwatch
The stopwatch measures elapsed time, split times, and two fi nishes.
To enter the Stopwatch Mode
Use C to select the Stopwatch Mode as shown on page
E-8.
The mode dial hand will move to STW.
To perform an elapsed time operation
D D D D A
Start Stop (Resume) (Stop) Reset
Hours
Seconds
Minutes
1/100
second
Hours
Seconds
Minutes
1/100
second


Product specificaties

Merk: Casio
Categorie: Horloge
Model: 5475

Heb je hulp nodig?

Als je hulp nodig hebt met Casio 5475 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Horloge Casio

Handleiding Horloge

Nieuwste handleidingen voor Horloge