Carson MP-400 Handleiding

Bekijk gratis de handleiding van Carson MP-400 (2 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 21 mensen en kreeg gemiddeld 4.9 sterren uit 2 reviews. Heb je een vraag over Carson MP-400 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

MicroPic

™

MP-400

120x-240x Pocket Microscope

Congratulations on selecting your new pocket microscope! In order to

achieve optimum performance, please follow instructions for proper use.

PRODUCT OVERVIEW

1. Zoom Dial

2. Focusing Wheel

3. Objective Lens

4. Removable Base

Stand

5. Battery door

(not shown)

6. LED Button

7. Eyepiece

8. Smartphone

Adapter Clip

1.

2.

3.

4.

5.

6.

7.

8.

Top View of

Microscope

INSERTING BATTERY

Remove base stand and slide battery door

down. Insert 1 AA battery (not included),

following the polarity indicators marked

inside the battery compartment. Replace

door when finished.

Use only alkaline battery. Keep away from fire or

excessive heat. Inspect battery for corrosion or

leakage. Insert in direction indicated. Rechargeable

battery not recommended.

Battery Warning

USING MICROSCOPE WITH BASE STAND

Place microscope into base stand and insert

prepared slide in slot. Once positioned, follow

steps 2-4 for “Using Microscope.”

MAKING CUSTOM SLIDES

For Dry Specimens:

1. Clean slides with a microfiber cloth to remove fingerprints

and dust.

2. Place a few dry granules of your choice (salt, soil, a strand

of hair, etc.) on blank slide.

3. Using eye dropper (not included), put one drop of water on

top of specimen to hold in place. Gently place coverslip on

top of specimen and let dry before viewing.

Important: Empty and dry eye dropper after each use.

For Wet Specimens:

1. Clean slides with a microfiber cloth to remove fingerprints

and dust.

2. Sprinkle a drop of algae, pond, or dirty water, etc. on blank

slide. and place coverslip on top of specimen. No additional

drop of water is needed. View immediately.

Removable

Base Stand

Prepared Slide

1. Remove base stand. Place viewing object directly below

objective lens.

Note: Microscope must be placed flush to viewing object

to work properly.

2. Press LED button once to turn light on low and twice for

high. Pressing a third time will turn light off.

3. Look through eyepiece and rotate Focusing Wheel slowly

until object is sharp and clear.

4. Adjust Zoom Dial to desired magnification and readjust

Focusing Wheel as needed.

Note: For best clarity when zooming in, use highest

brightness setting.

USING MICROSCOPE

Objective Lens

LED Button

Eyepiece

Focusing

Wheel

Zoom

Dial

Top View of Microscope

To avoid permanent eye damage:

Do not look at the sun with

microscope or place lighted

microscope directly upon human eye.

WARNING

Magnification:

Exit Pupil Diameter

(low magnification):

Exit Pupil Diameter

(high magnification):

120x-240x

0.6mm

0.3mm

PRODUCT SPECIFICATIONS

Weight:

Dimensions:

Illumination:

0.16 (excluding battery)

4.1" x 1.8" x 1.2"

LED - low and high setting

Battery:

Accessories:

1 AA (not included)

Smartphone

adapter clip and

1 blank slide with

coverslip

Product specificaties