Cardinal Detecto EH-1044 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Cardinal Detecto EH-1044 (3 pagina's) in de categorie Weegschaal. Deze handleiding was nuttig voor 2 personen en werd door 1.5 gebruikers gemiddeld met 4.7 sterren beoordeeld

Pagina 1/3
Echelon EH Series Floor Scale Set-up
1930-0490-0M Rev A
03/16
1
EH-544 / EH-1044
Economy Floor Scale
1
Locate box of feet in carton on underside of scale.
3
4
Remove junction box from scale.
2
Screw foot into load cell at each corner.
Echelon EH Series
Floor Scale Set-up
1930-0490-0M Rev A
03/16
Echelon EH Series Floor Scale Set-up
2
7
Route indicator cable through the scale side cover.
5
Remove the four screws and cover of the junction box.
6
Remove indicator cable wires from terminal block.
Note location of wires:
- EXE Black
- SIG White
SHIELD May be any color
+ SIG Green
+ EXE Red
Echelon EH Series Floor Scale Set-up
1930-0490-0M Rev A
03/16
3
Scale is now ready to connect to digital weight indicator and calibrate.
8
Re-connect indicator cable wires to terminal block in junction box.
Ensure wires are reconnected to the proper terminals.
Note location of wires:
- EXE Black
- SIG White
SHIELD May be any color
+ SIG Green
+ EXE Red
10
Place junction box in scale and re-install side cover.
9
Replace cover on junction box and secure with four screws.


Product specificaties

Merk: Cardinal Detecto
Categorie: Weegschaal
Model: EH-1044

Heb je hulp nodig?

Als je hulp nodig hebt met Cardinal Detecto EH-1044 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden