Caravelle 44M113 Handleiding


Lees hieronder de đź“– handleiding in het Nederlandse voor Caravelle 44M113 (20 pagina's) in de categorie Horloges. Deze handleiding was nuttig voor 35 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/20
SETTING NON-DATE MODELS
If the watch has no second
hand, merely pull out the
crown and proceed to step 2.
Step 1: When the second
hand reaches the 60th sec-
ond mark, pull the crown to
the “OUT” position. All
hands will stop.
Step 2: Turn the hands forward (clockwise) to set
the time. In order to prevent the hands from jump-
ing when the crown is pushed in, set the minute
hand approximately 5 minutes ahead of the
desired minute marker; then, gently turn back to
the same minute marker.
Step 3:When the time standard by which you are
setting your watch reaches the 60th second, push
the crown to the “IN” position without turning. All
hands will start instantly.
SETTING DATE AND DAY/DATE MODELS
Step 1: When the second hand reaches the 60th
second mark, pull the crown all the way to the
“OUT” position (you will hear two tiny “click”
sounds). All hands will stop.
Step 2: With the crown still in the “OUT” position,
move hands forward (clockwise) until you see the
date (for date only) or both day and date change.
This establishes midnight.
Step 3: For AM time, continue to move the hands
forward until the minute hand is approximately 5
1
IN POSITION
OUT POSITION
minutes ahead of the
desired minute marker;
then, gently turn back
to the same minute
marker. For PM time,
follow the same proce-
dure, but first advance
the hands past 12
o’clock.
Note: The date will advance automatically at
midnight, provided that AM and PM have been
established (steps 2 and 3). The watch calendar
is programmed for a 31-day cycle. Therefore, on
the first day of any month following a month with
less than 31 days, the date must be advanced
manually (see Step 5).
Step 4: When the time standard by which you are
setting your watch reaches the 60th second, push
the crown all the way to the “IN” position without
turning. All hands will start instantly.
Step 5: Pull the crown to the “INTERMEDIATE”
position (one “click”). Your watch will continue to
tell time. Slowly turn crown one way until correct
date appears. Then, for day/date models, slowly
turn crown the other way until correct day
appears.
Note: The day is printed in two successive
positions on the day indicator: in English and in
Spanish on U.S. models; in English and in French,
depending on the models. It is possible to make
use of either position. The display will automatically
2
IN POSITION
OUT POSITION
INTERMEDIATE
POSITION
remain in the language chosen.
In some models, the calendar cannot be changed
manually between 9:00pm and 6:00am. However,
the mechanism will not be damaged if the crown
is turned accidentally during this period of time.
Step 6: Push the crown to the “IN” position. Your
watch is now operating normally.
HOW TO USE THE ELAPSED TIME INDICATOR
If your watch is equipped with a
rotatable outer dial with one-
minute graduations, this can be
used in various ways to check
elapsed time. For example if a
diver has a 30-minute air sup-
ply, he can set the outer ring so that the triangle is
in line with the minute hand when he submerges.
The minute hand will then indicate on the outer
ring the length of time that the diver has been
under water.
SCREW-DOWN CROWN
If your watch includes a screw-down crown, you
have additional assurance that it will remain water-
tight. To make the crown operational, it must be
turned toward you until the threads are disengaged.
Then, instructions for setting must be followed. To
reseal the crown, press in until threads engage.
Turn away from you until tight.
3


Product specificaties

Merk: Caravelle
Categorie: Horloges
Model: 44M113

Heb je hulp nodig?

Als je hulp nodig hebt met Caravelle 44M113 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Horloges Caravelle

Handleiding Horloges

Nieuwste handleidingen voor Horloges