Canon XL H1S Handleiding

Canon Camcorder XL H1S

Lees hieronder de 📖 handleiding in het Nederlandse voor Canon XL H1S (163 pagina's) in de categorie Camcorder. Deze handleiding was nuttig voor 19 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/163

HD Video Camera Recorder

Instruction Manual

Caméscope et lecteur vidéo HD

Manuel d'instruction

Videocámara y grabadora HD

Manual de Instrucciones

PUB. DIM-870

English

Français

Español

NTSC

COPY

Intr od uctio n

Important Usage Instructions

WARNING:

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.

WARNING:

TO REDUCE THE RISK OF ELECTRIC SHOCK AND TO REDUCE ANNOYING INTERFERENCE, USE THE RECOMMENDED

ACCESSORIES ONLY.

Unauthorized recording of copyrighted materials may infringe on the rights of copyright owners and be contrary to

HD Video Camera Recorder, XL H1S A / XL H1A A Systems.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not

cause harmful interference, and (2) this device must accept any interference received, including interference that may cause

undesired operation.

Note: This equipment has been tested and found to comply with the limits for class B digital device, pursuant to Part 15 of the FCC

Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This

equipment generates, uses and can radiate radio frequency energy and, if not installed and use in accordance with the

instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not

occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be

determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the

following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Use of shielded cable is required to comply with class B limits in Subpart B of Part 15 of FCC Rules.

Do not make any changes or modifications to the equipment unless otherwise specified in the manual.

If such changes or modifications should be made, you could be required to stop operation of the equipment.

Canon U.S.A. Inc.

One Canon Plaza, Lake Success, NY 11042, U.S.A.

Tel No. (516)328-5600

CAUTION:

TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.

mportant

arn

CAUTION:

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE

COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

The lightning flash with arrowhead symbol, within

an equilateral triangle, is intended to alert the user

to the presence of uninsulated “dangerous

voltage” within the product’s enclosure, that may

be of sufficient magnitude to constitute a risk of

electric shock to persons.

The exclamation point, within an equilateral

triangle, is intended to alert the user to the

presence of important operating and maintenance

(servicing) instructions in the literature

accompanying the product.

COPY

Introduction

IMPORTANT SAFETY INSTRUCTIONS

In these safety instructions the word “product” refers to

the Canon HD Video Camera Recorder XL H1S A /

L H1A A and all its accessories.

1. Read Instructions — All the safety and operating

instructions should be read before the product is

operated.

2. Retain Instructions — The safety and operating

instructions should be retained for future reference.

3. Heed Warnings — All warnings on the product and in

the operating instructions should be adhered to.

4. Follow Instructions — All operating and maintenance

instructions should be followed.

5. Cleaning — Unplug this product from the wall outlet

before cleaning. Do not use liquid or aerosol cleaners.

The product should be cleaned only as recommended

in this manual.

6. Accessories — Do not use accessories not

recommended in this manual as they may be

hazardous.

7. Avoid magnetic or electric fields — Do not use the

camera close to TV transmitters, portable

communication devices or other sources of electric or

magnetic radiation. They may cause picture

interference, or permanently damage the camera.

8. Water and Moisture — Hazard of electric shock — Do

not use this product near water or in rainy/moist

situations.

9. Placing or Moving — Do not place on an unstable

cart, stand, tripod, bracket or table. The product may

fall, causing serious injury to a child or adult, and

serious damage to the product.

A product and cart combination should

be moved with care. Quick stops,

excessive force, and uneven surfaces

may cause the product and cart

combination to overturn.

10. Power Sources — The CA-920

Compact Power Adapter should be operated only

from the type of power source indicated on the

marking label. If you are not sure of the type of power

supply to your home, consult your product dealer or

local power company. Regarding other power sources

such as battery power, refer to instructions in this

manual.

11. Polarization — The CA-920 Compact Power Adapter

is equipped with a polarized 2-prong plug (a plug

having one blade wider than the other).

The 2-prong polarized plug will fit into the power

outlet only one way. This is a safety feature. If you are

unable to insert the plug fully into the outlet, try

reversing the plug. If the plug still fails to fit, contact

your electrician to replace your obsolete outlet. Do

not defeat the safety purpose of the polarized plug.

12. Power Cord Protection — Power cords should be

routed so that they are not likely to be walked on or

pinched by items placed upon or against them. Pay

particular attention to plugs and the point from which

the cords exit the product.

13. Outdoor Antenna Grounding — If an outside antenna

is connected to the product, be sure the antenna is

grounded so as to provide some protection against

voltage surges and built-up static charges. Section

810 of the National Electrical Code, ANSI / NFPA No.

70—1984, provides information with respect to

proper grounding of the mast and supporting

structure, grounding of the lead-in wire to an antenna

discharge unit, size of grounding conductors, location

of antenna discharge unit, connection to grounding

electrodes, and requirements for the grounding

electrode. See figure 1.

14. Lightning — For added protection of this product

during a lightning storm, or when it is left unattended

and unused for long periods of time, disconnect it

from the wall outlet and disconnect the antenna. This

will prevent damage to the product due to lightning

and power-line surges.

15. Power Lines — An outside antenna system should not

be located in the vicinity of overhead power lines or

other electric light or power circuits, or where it can

fall into such power lines or circuits. When installing

an outside antenna system, extreme care should be

taken to keep from touching such power lines or

circuits as contact with them might be fatal.

16. Overloading — Do not overload wall outlets and

extension cords as this can result in a risk of fire or

electric shock.

17. Objects and Liquid Entry — Never push objects of

any kind into this product through openings as they

may touch dangerous voltage points or short out

parts that could result in a fire or electric shock. Be

careful not to spill liquid of any kind onto the product.

18. Servicing — Do not attempt to service this product

yourself as opening or removing covers may expose

you to dangerous voltage or other hazards. Refer all

servicing to qualified service personnel.

Fig.1

ANTENNA LEAD IN WIRE

ELECTRIC SERVICE

EQUIPMENT

GROUND CLAMP

GROUND CLAMPS

POWER SERVICE GROUNDING

ELECTRODE SYSTEM

(NEC ART 250. PART H)

GROUNDING CONDUCTORS

(NEC SECTION 810-21)

NEC - NATIONAL

ELECTRICAL CODE

ANTENNA DISCHARGE UNIT

(NEC SECTION 810-20)

EXAMPLE OF ANTENNA GROUNDING AS PER NATIONAL ELECTRICAL

CODE

COPY

Product specificaties

Merk:	Canon
Categorie:	Camcorder
Model:	XL H1S
Kleur van het product:	Zwart
Gewicht:	2560 g
Breedte:	226 mm
Diepte:	496 mm
Hoogte:	220 mm
Beeldscherm:	LCD
Beeldschermdiagonaal:	2.4 "
Automatisch scherpstellen:	Ja
Totaal aantal megapixels:	1.56 MP
Minimale belichting:	0.4 Lux
Compatibele geheugenkaarten:	MMC, SD, SDHC
Microfoon, line-in ingang:	Ja
Brandpuntbereik:	5.4 - 108 mm
Omvang optische sensor:	1/3 "
Beeldstabilisator:	Ja
Maximale beeldresolutie:	1920 x 1080 Pixels
Type beeldsensor:	CCD
Digitale zoom:	0 x
Optische zoom:	20 x
35 mm cameralens equivalent:	38.9 - 778 mm
Beeldschermresolutie (numeriek):	215000 Pixels
Audio-uitgang:	RCA
Componentuitgang video (YPbPr/YCbCr):	1
Aantal IEEE 1394-/Firewire-poorten:	1
Focusbereik lens:	f/1.6 - 3.5
Scherpstellen:	Automatisch/handmatig
Afmetingen (B x D x H):	226 x 496 x 220 mm
Video uit:	S, BNC, HD/SD-SDI
Maat filter:	72 mm
Camcorder media type:	Geheugenkaart
Manuele focus:	Ja
Binnen witbalans:	Ja
Bedrijfstemperatuur (T-T):	0 - 40 °C
Batterijtechnologie:	Lithium-Ion (Li-Ion)
Type batterij:	BP-930, BP-945, BP-950G, BP-970G
Buiten witbalans:	Ja
DV port:	Ja