Canarm MC-3 Handleiding

Bekijk gratis de handleiding van Canarm MC-3 (5 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 2 mensen en kreeg gemiddeld 4.6 sterren uit 4 reviews. Heb je een vraag over Canarm MC-3 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

WARRANTY

For service, contact your local retail outlet or distributor. The warranty period shall be 12 months from the purchase date. Proof of

payment is required for warranty validation. In all cases, the warranty shall apply only to defects in workmanship and specically

exclude any damage caused by overload, short circuit, misuse, act of vandalism, fortuitous events, acts of God, ood, re, hail or

natural disaster. This warranty becomes invalid should the installation have been made contrary to our instructions.

SAFETY WARNING - PLEASE READ CAREFULLY

A qualied electrician in accordance with the national electrical code and other local codes, which may apply, should install unit.

This control must be grounded when installed. Failure to follow these instructions may result in electrical shock or a re hazard.

To reduce the risk of re or electrical shock this control must not be used at ratings exceeding those clearly marked on the

device. The manufacturer is not responsible for any expense, inconvenience or consequent damage caused by items of our

manufacture or sale.

WARNING!

Power must be turned off before wiring. Connect control in series with motor and line voltage - never connect

control across line. For use with Industrial Ceiling Fans only.

MINIMUM SPEED ADJUSTMENT

This control was designed to operate on Canarm Ltd. industrial fans. If you want to adjust the minimum speed, locate the minimum

speed adjustment and follow these instructions.

a) Motor must be in actual operating condition to achieve proper speed adjustment. (Motor will not slow down unless blades are

attached).

b) Turn main control knob clockwise to lowest speed position.

c) Locate and adjust minimum speed setting on front plate with screwdriver (rotate clockwise to increase minimum speed,

counter-clockwise to decrease minimum speed so that motor runs sufcient torque to prevent stalling. If fan stops on its own then

minimum setting is too low.).

d) Motor will now operate from this present minimum speed to full speed.

FINAL MOUNTING

a) Install front dial plate (Remove protective plastic on face of dial plate).

b) Turn main control until switch clicks off.

c) Push on the knob ensuring that the pointer lines up with the off position.

Installation or Product problems? Do not return to store of purchase.

Contact Canarm Service at 1-800-265-1833 (CANADA) 1-800-267-4427 (U.S.A.)

Monday to Friday 8:00 - 5:00pm e.s.t.

CANARM LTD. CANARM LTEE. CANARM LTD.

2157 PARKEDALE AVENUE 2555 RUE BERNARD LEFEBVRE808 COMMERCE PARK DRIVE

BROCKVILLE, ONTARIO K6V 5V6LAVAL, QUEBEC H7C 0A5OGDENSBURG, NY 13669

TELEPHONE: (800) 267-4427TELEPHONE: (613) 342-5424TEL: (450) 665-2535

FAX: 1-800-263-4598 FAX: (450) 665-0910 FAX: 1-800-263-4598

E-MAIL: [email protected]E-MAIL: [email protected]E-MAIL: [email protected]

M0060 - 01/2024 Page 1 of 2

WIRING

MOUNTING

Controls are designed to t a standard electrical box.

Secure control with outer bracket tabs.

DOWN DRAFT

BLACK

WHITE

RED

BLUE

MOTOR

WHITE

BLACK

120 VOLTS

SUPPLY

GREEN

CONTROL

UP DRAFT

BLUE

BLACK

WHITE

RED

MOTOR

WHITE

BLACK

GREEN

CONTROL

120 VOLTS

SUPPLY

WALL MOUNT SPEED CONTROL INSTALLATION INSTRUCTIONS - MC3

Product specificaties