Canarm CNFRMC5 Handleiding

Bekijk gratis de handleiding van Canarm CNFRMC5 (2 pagina’s), behorend tot de categorie Ventilator. Deze gids werd als nuttig beoordeeld door 4 mensen en kreeg gemiddeld 4.2 sterren uit 4 reviews. Heb je een vraag over Canarm CNFRMC5 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

WARRANTY

For service, contact your local retail outlet or distributor. The warranty period shall be 12 months from the purchase date. Proof of

payment is required for warranty validation. In all cases, the warranty shall apply only to defects in workmanship and specically exclude

any damage caused by overload, short circuit, misuse, act of vandalism, fortuitous events, acts of God, ood, re, hail or natural

disaster. This warranty becomes invalid should the installation have been made contrary to our instructions.

SAFETY WARNING - PLEASE READ CAREFULLY

A qualied electrician in accordance with the national electrical code and other local codes, which may apply, should install unit. This

control must be grounded when installed. Failure to follow these instructions may result in electrical shock or a re hazard. To reduce the

risk of re or electrical shock this control must not be used at ratings exceeding those clearly marked on the device. The manufacturer

is not responsible for any expense, inconvenience or consequent damage caused by items of our manufacture or sale.

INSTRUCTION FOR SPEED CONTROL MODEL CNFRMC5

WARNING: Power must be turned off before wiring. Connect control in series with motor and line voltage

- never connect control across line. For use with Industrial Ceiling Fans only.

MINIMUM SPEED ADJUSTMENT

This control was designed to operate on Canarm Ltd. industrial fans. If you want to adjust the minimum speed, locate the minimum

speed adjustment and follow these instructions.

a) Motor must be in actual operating condition to achieve proper speed adjustment. (Motor will not slow down unless blades

are attached).

b) Turn main control knob clockwise to lowest speed position.

c) Locate and adjust minimum speed setting on front plate with screwdriver (rotate clockwise to decrease minimum speed,

counter-clockwise to increase minimum speed so that motor runs sufcient torque to prevent stalling. If fan stops on its own

then minimum setting is too low.).

d) Motor will now operate from this present minimum speed to full speed.

FINAL MOUNTING

a) Install front dial plate (Remove protective plastic on face of dial plate).

b) Turn main control until switch clicks off.

c) Push on the knob ensuring that the pointer lines up with the off position.

Installation or Product problems? Do not return to store of purchase.

Contact Canarm Service at 1-800-265-1833 (CANADA) 1-800-267-4427 (U.S.A.)

1-800-567-2513 (EN FRANCAIS) Monday to Friday 8:00 - 5:00pm e.s.t.

or visit www.canarm.com

M0062 - 01/2024Page 1 of 1

INSTRUCTIONS FOR FORWARD/REVERSE SWITCH

Slide switch left to right to change direction of fan from updraft to downdraft.

MOTOR

RED

WHITE

BLACK

BLUE

RED

BLUE

YELLOW

WHITE

BLACK

WHITE

120 VOLTS SUPPLY

CNFRMC5

GREEN

GREEN

WIRING

MOUNTING

Controls are designed to t a standard electrical box.

Secure control with outer bracket tabs.

CAUTION: Do not reverse fan direction when fan is operating. Fan must be “Off” before reversing.

CANARM LTD. CANARM LTEE. CANARM LTD.

2157 PARKEDALE AVENUE 2555 RUE BERNARD LEFEBVRE808 COMMERCE PARK DRIVE

BROCKVILLE, ONTARIO K6V 5V6LAVAL, QUEBEC H7C 0A5OGDENSBURG, NY 13669

TELEPHONE: (800) 267-4427TELEPHONE: (613) 342-5424TEL: (450) 665-2535

FAX: 1-800-263-4598 FAX: (450) 665-0910 FAX: 1-800-263-4598

E-MAIL: [email protected]E-MAIL: [email protected]E-MAIL: [email protected]

Product specificaties