Canarm BTA15T10075A Handleiding

Bekijk gratis de handleiding van Canarm BTA15T10075A (11 pagina’s), behorend tot de categorie Ventilator. Deze gids werd als nuttig beoordeeld door 7 mensen en kreeg gemiddeld 4.3 sterren uit 7 reviews. Heb je een vraag over Canarm BTA15T10075A of wil je andere gebruikers van dit product iets vragen? Stel een vraag

TUBEAXIAL-M

1

INSTALLATION, OPERATION, AND MAINTENANCE MANUAL

TUBE AXIAL FANS

BTA, WTA, HTA, DDA

The purpose of this manual is to aid in the proper installation and operation of the fans.

These instructions are intended to supplement good general practices and are not intended to

cover detailed instruction procedures. It is the responsibility of the purchaser to assure that the

installation and maintenance of this equipment is handled by qualified personnel.

Inspect all shipments carefully for damage. THE RECEIVER MUST NOTE ANY

DAMAGE ON THE CARRIER’S BILL OF LADING AND FILE A CLAIM

IMMEDIATELY WITH THE FREIGHT COMPANY.

INSTALLATION

1.The fans, when lifted, should be lifted using the flanged ends of the tube or by placing a

sling around the fan tube, and never by the motor, belt tube or motor base.

2.Caution: The fan contains rotating parts and requires electrical service. Appropriate

safety precautions should be taken during installation, operation and maintenance.

3.All electrical work must be done, in accordance with all applicable electrical codes, by a

qualified electrician.

4.Prior to wiring, ensure that the power supply is locked in the OFF position and that the

motor nameplate voltage and the supply voltage match.

5.Be sure to keep all electrical wiring clear of any moving parts.

6.Tighten all nuts, bolts and setscrews to the proper torque settings (see chart), as some

may have loosened during shipping.

7.Before starting the fan, ensure that the wheel rotates freely.

8.On belt driven fans, assure that the belts are aligned and tensioned correctly.

9.Assure that all protective guards and other safety devices are installed properly prior to

fan start-up.

Product specificaties