Caliber MCD 250 M Handleiding

Caliber Autoradio MCD 250 M

Lees hieronder de 📖 handleiding in het Nederlandse voor Caliber MCD 250 M (18 pagina's) in de categorie Autoradio. Deze handleiding was nuttig voor 29 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/18
E N G L I S H
2
S P E C I F I C A T I O N S
GENERAL
Power requirement DC 12V
Current consumption 15A
Power output 4 X 55W
FM SECTION
Frequency range 87.5 to 108 MHz
Usable sensitivity 3uV
I.F frequency 10.7MHz
LINE-OUT
Output 1 Volt
CD PLAYER
System Compact Disc Audio System
Usable disc Compact Disc
Signal format Sampling frequency 44.1KHz
No. of quantization BITs 1 BIT
Frequency characteristics 5-40Hz-5dB 10K-20KHz-5dB
Signal to noise radio 70dB (1KHz) (IEC-A NET WORK)
Number of channels 2 STEREO
Chassis dimensions (mm) 184 (W) X 54 (H) X 170 (D)
1. OPEN button
2. SEL (Volume/Bass/Treble/Balance/Fader)
3. TRACK UP/DOWN buttons
4. APS/MP3 button
5. TA button
6. MODE button
7 -8-9-10-11-12. PRESET MEMORY buttons
13. PTY button (Program Type)
14. CLOCK button
15. AF button (Alternative Frequencies)
16. BAND button
17. POWER button
18. Flashing LED
19. RESET button
E N G L I S H
3
O P E R A T I O N
For CD/RW + RDS + MP3 model with optional subwoofer function
1. OPEN button
Press it to flip down the front panel.Then you can insert the CD disc into the CD
compartment or press the Eject button to eject the disc.
2. SEL ( AUDIO MODE SELECT)/ +/- buttons
Press SEL button to change the mode in the sequence of:
A. The volume level can be adjusted at any time by pressing the audio level + or -
button as select mode has been initially defaulted at volume mode.
B. The volume level is also obtained by stepping through the SEL button until the
function VOL is displayed and then press + or - button to adjust the sound level.
C. Press SEL button to select the BAS,TRE, BAL, FAD mode, then press +/- button
to adjust the level.
D. Press SEL button, hold for more than 2 seconds and select + or - button, so a
beep sound can be heard.
3. TRACK UP /DOWN buttons
A. During CD mode, pressing the >> button will allow you to track forwards. Hold
it to skip forwards.
B. During MP3 mode, pressing the >> button will allow you to track forwards.Hold
it to skip forwards.For MP3 playing, these two buttons act as the digit 8 & 9 key.
C.
During RADIO mode, press and hold >> or << for more than 2 seconds to
manually search a channel.Then press >> or << to automatically search a channel.
4. APS/MP3 button
In radio mode:
When pressed short, the radio searches for each preset station.
When the field strength level is more than the threshold level of stop level,the radio
will hold at that preset number for a few seconds with releasing mute, and then
searches again. In FM band, FM 1, FM 2 and FM 3 are checked one at a time.When
pressed long (more than 1 second),the radio searches from the current frequency
and checks the signal strength level until 1 cycle search is finished.And then the 6
strongest stations are preset to the corresponding preset number.The AS operation
is implemented in each selected band.When the AS operation is finished, the radio
executes the preset scan.
In MP3 mode:
Press 0-9 and ENTER button to play the track, number 1-108.
5. TA button
TA function (traffic announcement)
When pressed short, it is activated as TA mode on or off.
When TA mode is on and traffic announcement is transmitted:
1. When the unit is in CD mode, it will switch to radio mode temporarily.
2. Temporary switch over to an EON (Enhanced Other Networks) linked station
when EON detects a traffic announcement on that other program.
3. If the volume level was under the threshold point, it will be raised to the
threshold point. But if the user changed the volume level which was more than
the threshold point (min.TA volume level),it will be set to the last level.
When pressed long, EON TA LOCAL / EON TA DISTANCE mode is selected:
The purpose of this key is to reduce unwanted EON TA switching, when EON TA
information was received from current station and the radio switched to that EON
linked station, but no information could be received because the EON linked
station is located too far from that area.
So the radio is switched back to the current station.
In above operation,the user may listen to a wrong program or mute sound for a while.
EON TA LOCAL mode
When the field strength level of EON linked is less than the threshold level,the radio
does not switch to that station, and the user can hardly hear any disturbances.
When EON TA LOCAL mode is selected, EON TA LO on the numeric display is
indicated for a few seconds.
EON TA DISTANCE mode
EON TA switching is trying to implement the information of the current station.
When EON TA DISTANCE mode is selected, EON TA DX on the numeric display
is indicated for a few seconds.
6. MODE button
Press it repeatedly to select CDP, AUX and RADIO mode in sequence and circulation.
For SUBWOOFER function (optional), press and hold for more than 2 seconds to
select SUBWOOFER mode.
For MP3 playing, this button can act as the digit 7 key.
7-8-9-10-11-12. PRESET MEMORY buttons
A. To memorize the current frequency, press any one of the six preset buttons and
hold for more than 2 seconds.
B. To r ecall the preset memory, press one of the preset buttons (1-6).
VOL BAS TRE BAL FAD
(Volume) (Bass) (Treble) (Balance) (Fader)
E N G L I S H
4
C. Radio mode
When pressed short, these keys select a preset station directly. When pressed
longer than one second,the current station is stored in the preset memory bank.
When PTY mode is selected, the preset memory buttons are shared as follows:
PTY music group - PTY speech group - OFF MUSIC SPEECH
a. POP M, ROCK M a. NEWS,AFFAIRS, INFO
b. EASY M, LIGHT M b. SPORT, EDUCATE, DRAMA
c. CLASSICS, OTHER M c. CULTURE, SCIENCE,VARIED
d. JAZZ, COUNTRY d. WEATHER, FINANCE, CHILDREN
e. NATION M, OLDIES e. SOCIAL, RELIGION, PHONE IN
f. FOLK M f. TRAVEL, LEISURE, DOCUMENT
D. In CDP mode, press 1PAU button to pause CDP playing, press it again to resu-
me CDP playing.
E. In CDP mode, press 2SCN button to play the first 10 seconds of each song, press
it again to stop scanning and retain playing the song currently selected.
F. In CDP mode, press 3RPT button to play the current track repeatedly.
Press it again to cancel this mode.
G.In CDP mode, press 4SHF button to play the tracks in random order.
Press it again to cancel this mode.
13. PTY (Program type) button
This key is operated as follows:
PTY MUSIC GROUP - PTY SPEECH GROUP - PTY OFF
While selecting PTY TYPE, its selection is implemented by preset buttons as
described in preset key. When PTY is selected, the radio starts to search corres-
ponding PTY information, and stops if the corresponding PTY information is
detected. If corresponding PTY information does not exist anymore, PTY type
automatically exits to normal mode.
14. CLOCK button
Press it to display time on the LCD for a few seconds. Press it, hold and then press
<< or >> button to adjust hour or minute. For MP3 playing, this button can act as
the digit 0 key.
15. AF button (alternative frequencies)
When pressed short, AF switching mode is selected and the state of AF switching
mode is displayed by AF segment in LCD.
Segment off: AF switching mode off.
Segment on: AF switching mode on: Has RDS information.
Segment flashing:AF switching mode is selected,but RDS information is not received yet.
When AF switching mode is selected,the radio checks the signal strength of the AF
all the time.The interval of checking time of each AF depends on the signal strength
of the current station, from a few minutes for a strong station to a few seconds for
a weak station. Every time that a new AF is stronger than the current station, it swit-
ches over to that frequency for a very short time, and NEW FREQUENCY is dis-
played for 1-2 seconds. Because the mute time of AF switching or checking time is
very short, it is almost inaudible in case of a normal program.When pressed long,
regional mode on /off is activated.
Regional mode ON
AF switching or PI SEEK is implemented to the station where all PI codes are the
same as the current station. REG of individual segment is turned on also, together
with displaying REG ON on the numeric display for a few seconds.
Regional mode OFF
The regional code in the format of PI code is ignored when AF switching or PI SEEK
is implemented. REG of individual segment is turned off together with displaying
REG OFF on the numeric display for a few seconds.
16. BAND button
Press it to select your desired radio band and the band which is selected will be
displayed on the LCD. Press it and hold for more than 2 seconds to activate LOUD
mode.
LOUD MODE:
When reducing the volume to half level, press it to enhance the bass effect.
For MP3 playing, this button can act as the ENTER key.
17. POWER button
Press it to turn the unit on or off.
18. Flashing LED
If the front panel is not on the main unit, LED will be flashing.
19. RESET button
The RESET button is placed on the housing and must be activated with either a
ballpoint pen or a thin metal object. The RESET button is to be activated for the
following reasons:
- Initial installation of the unit when all wiring is completed.
- All the function buttons do not operate.
- Error symbol on the display.
Note: If RESET button is pressed, the unit can't work yet; please use a cotton swab
soaked in isopropyl alcohol to clean the socket on the back of the front panel.


Product specificaties

Merk: Caliber
Categorie: Autoradio
Model: MCD 250 M

Heb je hulp nodig?

Als je hulp nodig hebt met Caliber MCD 250 M stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Autoradio Caliber

Handleiding Autoradio

Nieuwste handleidingen voor Autoradio