Caliber Crossover CXQ 3 Handleiding

Caliber Autoradio Crossover CXQ 3

Lees hieronder de 📖 handleiding in het Nederlandse voor Caliber Crossover CXQ 3 (11 pagina's) in de categorie Autoradio. Deze handleiding was nuttig voor 105 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/11
Thank you for choosing a Caliber product. In doing so you’ve demonstrated a
desire to own the nest in Car Audio Technology. Caliber strives to provide you
with the nest products possible, and is always looking for ways to please our
customers even more.
Properly installed, your Caliber amplier will provide years of high quality sonic
reproduction. Before installing this electronic bassdriver in your vehicle, please
read this entire manual carefully, in order to protect your vehicle, and get the
maximum performance of your mobile sound system.
Caliber Warranty
Due to the complexity of our products, we strongly recommend that this bass-
driver is installed and connected by your authorized Caliber dealer. If properly
installed and connected by your dealer, we provide a warranty for 12 month
from the date of purchase.
If you install and connect this bassdriver yourself, we wish you lots of fun and suc-
ces in doing so. If you follow our guidelines, you’ll get the best result. Our warran-
ty, however, will be limited to, and not exceed 30 days from the date of purchase.
Caliber Accessories
To r ealize the exceptional performance of which this bassdriver is capable, it is
necessary that power sources, signal sources, speakers and interconnects are of
the highest quality. Remember that Caliber is not just an equalizer manufacturer.
We also manufacture everything needed for the ‘optimal’ Car Audio System
(except the car). So be sure to ‘Get Connected’ with Caliber and ask your local
Caliber dealer for our accessories.
Contents
Before you start your installation . . . . . . . . . . . . . . . . . . . . . .This page
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Installing and adjusting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Manuel de propriĂŠtaire . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Bedienungsanleitung . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
BEFORE YOU START
F
D
A. Center Frequency
This knob is to be used to locate the correct resonance-frequency of the
subwoofer-enclosure you use.This is the frequency on which your subwoofer
will play the loudest. The center Frequency can be adjusted between 30Hz
and 400Hz, so the correct resonance for all types of subwooferenclosures is
within reach.
The Center Frequency knob can also be used to locate the frequencies that
sound a bit weaker or come on to strong. By changing the band-width (B)of
these frequencies, and adjusting the (output-)Level (C) you can adjust the
sound to your likings.This can be done directly for every new song, because
the remote control-unit must be mounted in-dash, so it can be adjusted from
the driversseat.
B. “Q”-adjustment
This Q-knob allows you to narrow or
widen the band-width of the frequency
you found with your Center Frequency
knob. The band-width runs between
Q2 (very broad) to Q20 (very small).
The band-width Q2 is very broad.
This means that at both sides of the
set Center Frequency a greater area
of frequencies will be amplied or
weakened.A band-with of Q20 is very
small,so only the set Center Frequency
will be amplied or weakened (see
drawing).
This gives you complete control over the set frequency-area, without interfering
with the other (low-pass-)frequencies.
C. Level Control
No doubt that this will be the most used knob of your remote control. By
adjusting the Level between min. and max. you can amplify or weaken the set
frequency and band-width, and thus the volume.
A warning has to be made:Take care in using the level control. It can, in it’s
max. position, amplify up to 24dB, which is a lot. Not every amplier or
woofer will have the capability to handle such a lot of power. But if the
Center Frequency and band-width are well adjusted, a woofer can handle
quiet a lot of power,especially if the Center Frequency matches the resonance-
frequency of you sub-wooferenclosure.
Due to our effort to innovate and improve our products, this modern high per-
formance electronic bassdriver offers you the following features:
•Delay remote output.
•Input Level Control (0dB - 24dB)
•Low-pass reversable phase (0° - 90° - 180°).
•Variable input sensitivity 250mV to 7V.
•Low-pass stereo / mono mode
•Output Level 15V/RMS
•Channel Separation 65dB.
•Signal to Noise Ratio 96dB.
•Thermal, Overload and Short-circuit protection.
•Excellent muting circuitry assures no turn on/off ‘pops’.
•Remote control with triple function.
•Center Frequency tuning from 30Hz - 400Hz.
•Adjustable band-width (Q2 - Q20).
•Variable Output Level Control.
•Fuse rating: 1A.
•Dimensions: 180 x 160 x 33mm.
•European design and engineering.
•Superb Sonic performance for your ‘Dream Machine’ on wheels.
•Years and years of acoustic pleasure.
The remote control shows you 3 knobs to play with.
A. Center Frequency (30Hz - 400Hz).
B. Q (band-width between Q2 - Q20).
C. Level (min. - max.)
CXR 3
CENTER FREQ.
30Hz 400Hz
CXR 3
Q
2 20
LEVEL
Min Max
Power
A B C
30Hz 400HzFreq.
Q20
Q2
1 With the stereo / mono selector switch, you can choose whether the output
signal will be in stereo or in mono.We advice you to put this switch in the
mono-position, especially if you have mounted more than one woofer in an
enclosure. Even if the ampliers are used in a stereo mode, the mono posi-
tion of the CXQ 3 is adviced. In this way you will be sure that both channels
will get the exact same signal and that the woofers perform in an optimal way.
Also by the use of only one woofer the mono-position is adviced, allthough
it wouldn’t make much difference if the stereo-position is used.The only situation
in which the stereo-position is adviced and required, is when you use the CXQ 3
to drive a couple of mid-bass woofers. In that case there is a need for the stereo
sound, because frequencies above the 200Hz are very well hearable in stereo.
2 With the phase reversal switch it is possible to alter the phase of the signal by
0°, 90° or even 180°.This can give a great advantage, especially if the woofers are
located on a great distance from the full-range speakers. This can give the
impression that the bass is a bit too late, compared to the full-range sound.
This is logical,because often the distance the bass-sound has to travel from the
back of the car, is twice the distance the full-range has to go in the front. By
shifting the phase with 90° or 180° this problem can be solved, however this
will not always be the case.
3 With the input level control you can amplify the input signal up to 24dB.This can
cause the output signal to become very powerfull, up to 15V.Therefore caution
must be taken by adjusting this inputlevel. It has a direct relation to the Level
Control on your remote control.The best way to get a correct adjustment for
your input level is to take it slowly,step by step. First put all the leveladjustments
in your system (also the ampliers input) to a minimum.Then turn the volume
of your head-unit to 80% of the maximum. Now slowly start increasing the
input level on your CXQ 3. Keep turning up the input level until the clipping
LED (5) starts to flicker. Now the signal is adjusted correctly, and in most
cases, you won’t even have to adjust the signal on your amplifier anymore.
4 The power LED illuminates when the CXQ 3 is turned on.When this LED is
not burning, there will be no power on the remote-signal, the +12V- or
ground cable.Also check if the fuse is still intact.
5 The clipping LED illuminates constantly when the output signal is clipping.This
can seriously damage your audio system. The clipping is caused by a too
strongly adjusted input level, and this input level should be turned down imme-
diately.When the clipping LED is flickering, it indicates that the output signal is
around 7V, which is a safe value for most ampliers and woofers.When you
have just insalled your CXQ 3, it is adviced to monitor this clipping LED regu-
lairy, in order to get a good adjustment for all your types of music.
Mounting your Caliber CXQ 3 BassDriver
Before mounting your Caliber CXQ 3 you must carefully choose the place
where it can be installed. Be sure that the power and signal cables can enter and
leave the CXQ 3 in a straight line, to avoid the risk of malfunction.
The CXQ 3 should be protected from exposure to moisture and direct sunlight.
If you’ve decided where to place your Caliber CXQ 3, and you’ve convinced
yourself there is enough protection from unusual hazards, mark the mounting
surface using the CXQ 3 as a template (Placing masking tape on these surfaces
rst will make your markings more visible).
Drill 2.5 mm (1/8”) diameter holes at the marked locations and mount the
amplier using the supplied self-tapping screws.
Note: Do not drill any holes while using the CXQ 3 as a template.You
can easily damage the CXQ 3’s coating in this manner.
Installing and adjusting the CXQ 3
There are 10 points of attention that need explaining on the CXQ 3. Once you
have read this, you will nd this BassDriver very easy to operate, and lots of fun
to play with.
1 Stereo / mono selector switch.
2 Phase recersal switch.
3 Input Level Control 0dB-24dB.
4 Power on LED.
5 Clipping LED.
6 Power and remote terminals.
7 Equalizer on/off switch.
8 Telephone jack for remote
control.
9 RCA’s Signal in
10 RCA’s Signal out
Input EQ
L R
Sub-Woofer
Remote Ctrl
+Output
L R
Sub-Woofer
MonoStereo
180°0°90°
Sub-Woofer
Phase
Input Level
0dB +24dB
-R D/R
Power
Off
On
Clipping
+24dB
Q 2
Q 20
Fuse 1A
HIGH PERFORMANCE
ELECTRONIC BASSDRIVER
CXQ 3
CXQ 3
1
2
3
8 7 6
4 5
9 10

Product specificaties

Merk: Caliber
Categorie: Autoradio
Model: Crossover CXQ 3

Heb je hulp nodig?

Als je hulp nodig hebt met Caliber Crossover CXQ 3 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Autoradio Caliber

Caliber

Caliber RCD 239DAB-BT Handleiding

4 Augustus 2023
Caliber

Caliber RMD 806BT Handleiding

19 Juni 2023
Caliber

Caliber RCD120DAB-BT Handleiding

18 Juni 2023
Caliber

Caliber RMD056DAB-BT Handleiding

13 Juni 2023
Caliber

Caliber CA 75 2 Handleiding

7 Juni 2023
Caliber

Caliber CA 2260 Handleiding

10 Mei 2023
Caliber

Caliber RMD402DAB-BT Handleiding

5 Mei 2023
Caliber

Caliber RMD055 Handleiding

3 Mei 2023
Caliber

Caliber MCD263BT Handleiding

30 April 2023
Caliber

Caliber RMD213DAB-BT Handleiding

29 April 2023

Handleiding Autoradio

Nieuwste handleidingen voor Autoradio

Alpine

Alpine SWC-W84CRA2 Handleiding

9 April 2024
Alpine

Alpine SWC-D84DU Handleiding

9 April 2024
DLS

DLS CAD15 Handleiding

5 April 2024
DLS

DLS A3 Ultimate Handleiding

5 April 2024
DLS

DLS CAD11 Handleiding

5 April 2024
DLS

DLS RA40 Handleiding

5 April 2024
Macrom

Macrom SP2.050 Handleiding

31 Maart 2024
Macrom

Macrom M-DVD7601 Handleiding

31 Maart 2024
Macrom

Macrom M3A.250 Handleiding

31 Maart 2024
Macrom

Macrom Syn Power 4.050 Handleiding

31 Maart 2024