CAD Audio U1 Handleiding

Bekijk gratis de handleiding van CAD Audio U1 (59 pagina’s), behorend tot de categorie Microfoon. Deze gids werd als nuttig beoordeeld door 68 mensen en kreeg gemiddeld 4.8 sterren uit 8 reviews. Heb je een vraag over CAD Audio U1 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

U1 USB Recording Microphone

Before using the U1 in your favorite audio or communications

application you must confi rm that the computer’s operating

system recognizes the U1.

Windows XP recognition instructions

1. Plug the U1 into the USB port on the computer.

(When using a USB hub, check with the hub manufacturer to

be sure the hub supports a device such as a microphone. Plug

the U1 directly into the computer’s powered USB port for

optimal performance.)

2. Allow 30 to 60 seconds for the system software to recognize

the U1. (A series of bubbles will appear by the Windows

toolbar to notify you of a new device.)

3. In the Start Menu, select Control Panel.

4. Select “Sounds, Speech, and Audio Devices”.

5. Select “Sounds and Audio Devices”.

6. Select the “Audio” tab. Confi rm that under the “Sound

recording” section the “C-Media USB Audio Device” is

selected. (The “Sound playback” should remain your usual

sound output device).

7. Select the “Volume” tab under the Sound recording heading

and select “Advanced Controls” in the Options menu of this

window.

8. Click the “Advanced” button to open the “Advanced Controls

for Wave In” window. Depending upon your system, you

might have the option of selecting “1 AGC” or “Mic boost”.

Checking this option will signifi cantly increase the sensitivity

of the microphone. Use this for recording softer sounds. If you

experience distortion when recording louder sounds, try

unchecking this option.

(Default playback device)

Product specificaties