BWT myPool BC200+ Handleiding

BWT Niet gecategoriseerd myPool BC200+

Lees hieronder de đź“– handleiding in het Nederlandse voor BWT myPool BC200+ (72 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 31 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/72
USER MANUAL
MANUEL D'UTILISATION
MANUAL DE USUARIO
MANUALE DELL'UTENTE
BEDIENUNGSANLEITUNG
HANDLEIDING
CORDLESS POOL ROBOT
ROBOT SANS CĂ‚BLE
ROBOT SIN CABLE PARA PISCINAS
ROBOT DA PISCINA SENZA FILI
KABELLOSER POOLROBOTER
DRAADLOZE ZWEMBADROBOT
2021/02 : A MAINTENANCE & CLEANING bwt.com
200+BC
SAFETY WARNINGS & INSTRUCTIONS
Information contained in this Instruction Manual will help you operate the item safely, protect yourself and others
from hazards, and prevent damage to the device and other property.
SAVE THESE INSTRUCTIONS
WARNING!
- This is not a TOY. Children should be kept out of reach from this robot and its accessories.
- Never allow children to operate this product.
-
This appliance is not intended for use by persons with reduced physical, sensory, mental capabilities, or
a lack of experience and knowledge, unless they are given supervision or instructions concerning the
safe use of the appliance and understand the hazards involved by a person responsible for their safety.
- Children must not play with this product.
- Cleaning and maintenance of the robot must not be carried out by children.
- Make sure the robot is fully immersed in the pool before initiating operation. The minimum water
level required to operate the robot must reach above the swivel head of the robot. Operating the
robot when it is not immersed correctly could damage the unit and void the warranty.
- Maximum operating depth in water is 3 meters (10 ft).
- Operating water temperature: 5 C (41 F) –35 C (95 F) ˚ ˚ ˚ ˚
- Detachable supply unit (external adaptor).
- The robot should only be recharged with the external adaptor and charging plug delivered with this
product.
- For the purposes of recharging the battery, only use the detachable supply unit (external adaptor
model number: DSS18-0842000-B / DSS18-0842000-C / DSS18-0842000-D/ LX084200) that
provided with this robot to charge the battery.
- Connect the external adaptor to a power source through a residential current device (RCD) / a
ground fault circuit interrupter (GFCI). If in doubt, consult a qualified electrician.
- Do not use this robot if any damage is detected.
- Replace damaged parts with ones that are certified by the distributor or manufacturer.
- Turn off the robot, disconnect the external adaptor from the power source, and unplug the external
adaptor from the charging plug, before detaching the robot from the charging plug.
- Disconnect the robot from the supply mains and make sure the robot is OFF prior to carrying out
regular maintenance – such as cleaning the filter, swivel smoothing-ring, and the areas around the
water sensors and charging port.
- Do not attempt to replace the installed rechargeable Li-ion battery pack.
- DO NOT handle the robot, external adaptor, and charging plug while it is charging with wet limbs
and without shoes.
- You should not operate this robot when people and/or pets are present in the water.
- DO NOT use this robot without an intact filter in place, otherwise your warranty will be voided as a
result.
- Suction entrapment hazard: This robot generates suction. Do not allow hair, body, and any loose
parts of your clothing to make contact with the suction hole of the robot during its operation.
- Never insert body parts, clothing, and other objects into the openings and moving parts of the robot.
- DO NOT use this robot to pick up any toxic substance, flammable, and combustible liquids (i.e.
gasoline) in the presence of explosive or flammable fumes.
ENGLISH
12021/02 : A MAINTENANCE & CLEANING bwt.com
- Under no circumstances should you disassemble the swivel head to replace its internal components
by yourself. Doing so would void the warranty, expose yourself to potential hazards, and possibly
damage the device and other properties.
- Never insert fingers or any object to touch the impeller.
- The built-in battery must be removed by a skilled technician before it is scrapped.
- This robot contains a battery that are only to be removed by skilled persons.
- The robot must be disconnected from the supply mains as the battery is removed.
- For details regarding battery recycling/disposal, refer to the section “BATTERY DISPOSAL” in this
manual and contact your local authorities for more information.
- The battery must be disposed safely in accordance with local ordinances or regulations.
- External adaptor and charging plug:
• Never use the external adaptor and charging plug for anything other than charging the battery of
the robot that is supplied in the same pack.
• The external adaptor and charging plug should not be used outdoors, nor should it be exposed to
rain, humidity, and any liquid or heat.
• The transformer ( or external adaptor) is to be located outside zone 1.
• Keep the external adaptor and charging plug out of reach of children.
• Never use the external adaptor and charging plug if any damage is detected.
• DO NOT handle the external adaptor and charging plug with wet hands.
• Keep the external adaptor disconnected from power when it is not in use.
• Never attempt to pry open the external adaptor.
• If the supply cord of the external adaptor is damaged, the external adaptor must be replaced by
the manufacturer or its service agent to prevent hazards of any kind.
• Make sure the robot is completely dry before charging.
CAUTION!
- This robot is designed for underwater use only; it is not an all-purpose vacuum cleaner. DO NOT attempt to use it to clean
anything other than your pool.
- Use only the original accessories delivered with this product.
- DO NOT use this robot right after pool-shocking. It is recommended to first leave the pool circulating for at least 24-48 hours.
- If you are planning on using the robot in a saltwater pool, make sure all salt are dissolved before deploying the robot.
- DO NOT use this robot with another automatic cleaner/cleaner simultaneously in the pool.
- Remove hard, sharp objects from the pool before deploying the robot to avoid damages to the robot and its filter.
- To avoid damages to the external adaptor and charging plug, do not attempt to carry the robot by the cord of external
adaptor / charging plug or pull the cord to disconnect it from the power source and charging plug.
- Charge the robot indoors in a clean, dry area with good ventilation and away from sunlight.
- DO NOT leave the robot charged for over 10 hours.
- If the robot will not be used for an extended period, detach it from the charging plug and use a damp cloth to clean and dry
the robot and its accessories. Make sure to charge the robot to about 30% to 50% of the battery capacity before it is stored.
Store it in a well-ventilated area away from sunlight, heat, ignition sources, pool chemicals, and children. Recharge the
robot every three months.
- All actions concerning the disassembly of the swivel head (ie. battery disposal) should only be carried out by an authorized
technician.
Above warnings and cautions are not intended to incorporate all possible instances for risks and / or severe
injuries. Pool / spa owners should always exercise extra caution and common sense when utilizing the product.
ENGLISH
2
2021/02 : A MAINTENANCE & CLEANING bwt.com


Product specificaties

Merk: BWT
Categorie: Niet gecategoriseerd
Model: myPool BC200+

Heb je hulp nodig?

Als je hulp nodig hebt met BWT myPool BC200+ stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd BWT

BWT

BWT Cosmy 150 Handleiding

16 November 2023
BWT

BWT Cosmy 200 Handleiding

16 November 2023
BWT

BWT Cosmy 100 Handleiding

15 November 2023
BWT

BWT D200 Handleiding

4 September 2023
BWT

BWT B100 Handleiding

9 Juli 2023
BWT

BWT B200 Handleiding

3 Juli 2023
BWT

BWT D100 Handleiding

1 Juli 2023

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd