Bushnell RXS250 Handleiding
Bushnell
Verrekijker
RXS250
Lees hieronder de đ handleiding in het Nederlandse voor Bushnell RXS250 (9 pagina's) in de categorie Verrekijker. Deze handleiding was nuttig voor 41 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/9
Model #: RXS250 10-21
RED DOT SIGHT OWNERâS GUIDE
Thank you for purchasing your new BushnellÂŽ RXS-250 Red Dot Reî´ex Sight (illuminated optical sight).
This manual will help you optimize your viewing experience by explaining how to utilize the sightâs features
and how to care for it. Read the instructions carefully before using your sight.
WARNING! : DO NOT LOOK AT THE SUN THROUGH THE OPTICS, AS PERMANENT EYE DAMAGE OR EVEN
BLINDNESS MAY RESULT.
Included:
A. Protective Cover Shroud
B. Battery Door & W/E Adjustment Tool
C. CR2032 Lithium Battery (in separate polybag)
D. Bushnell Multi-Tool
E. Weaver Style Low-proîle Mounting Base
F. Spudz Cleaning Cloth
A
B
C
D
E
F
3
ABOUT THE BUSHNELLÂŽ RXS-250 RED DOT REFLEX SIGHT
The RXS-250 is a state-of-the-art reî´ex sight, designed for hunting, plinking and target shooting with pistols, riî´es, and shotguns. It may
be directly mounted to compatible pistol slides (or accessory mounts) with the Leupold DeltaPointÂŽ footprint or it may be mounted
to accessory rails using the included low-proîle Weaver style mount. It features a battery life of more than 50,000 hours (at a typical
brightness level of â5â)*, a 12-hour auto-timeout feature to prolong battery life (timer countdown resets if any button is pressed, or it may
be disabled for full manual control), battery access without unmounting, and a 4 MOA dot with 10 brightness settings. The sight has an
IP67 rating for water resistance.
*Note: battery life in use will vary depending on the brightness settings used, freshness and quality of the battery, ambient temperature,
and other factors.
Your sightâs illuminated reticle has been pre-focused so the aiming point always appears in focus on the target. Byî˘comparison, open sights
force you to choose to focus your eye on only the rear sight, front sight or target-or settle for a blurry compromise.
Your sight can be easily used with both eyes open (eye relief is unlimited), increasing the shooterâs awareness of the surrounding
environment and providing faster target acquisition due to the limited parallax design, as the dot follows the movement of the userâs eye
while remaining îxed on the target. Engineered for greater speed and accuracy, the sight allows you to focus on the target rather than a
reticle, thus increasing accuracy. The Bushnell RXS-250 sightâs electronic illuminated dot has been pre-focused to be parallax free at 50
yards. Parallax error is minimized, from close range up to 100 yds.
MOUNTING YOUR RXS-250⢠SIGHT
WARNING! : BEFORE MOUNTING YOUR SIGHT, REPLACING ITS BATTERY, OR REMOVING OR PERFORMING
MAINTENANCE ON THE SIGHT, BE SURE ACTION IS OPEN, CLIP OR MAGAZINE IS REMOVED AND A ROUND
IS NOT IN THE CHAMBER. DO NOT ATTEMPT ANY WORK UNTIL THE FIREARM HAS BEEN CLEARED AND
DETERMINED TO BE SAFE.
WARNING: IF THE SIGHT IS NOT MOUNTED FAR ENOUGH FORWARD, ITS REARWARD MOTION MAY
INJURE THE SHOOTER WHEN THE FIREARM RECOILS.
Your new sight, even with its technologically advanced design and features, will not perform at its best if not properly mounted. One of
the most important contributing factors to the accuracy of your firearm and sight combination is the quality of the mount and care taken
during its installation. The RXS-250 will ît all bases compatible with LeupoldÂŽ DeltaPointÂŽ Pro sights. It also includes a low-proîle mount
for mounting on Weaver or Picatinny style accessory rails. Make sure the base you use is manufactured speciîcally for your pistol, riî´e or
shotgun. Be sure the base is properly installed and securely fastened according to the manufacturerâs instructions for your safety.
The included hold-down mounting screws (2) are intended to be used with indirect mounting adapter plates like what is utilized for GLOCK
M.O.S. There are other types of optics-ready plate systems from pistol manufacturers (e.g. TAURUS⢠TORO) that utilize a pass-through plate
system, which requires the user to utilize screws provided from the pistol manufacturer. If this is the case, additional care must be taken
to ensure the red dot sight is adequately clamped. Some screws may bottom out into the slide and seem to be tight, but in fact are not
adequately clamping the sight onto the slide. The potential resulting looseness can cause lens fracture and potential risk to the user. Always
follow user-manual guidance and/or seek assistance from the respective manufacturers or a qualiîed gunsmith. Always wear approved eye-
protection.
The base should create a uniform horizontal and vertical mounting platform. Be sure they are properly installed and securely fastened
according to the manufacturerâs instructions for your safety. There is no set eye relief for your RXS-250 sight; therefore, you should provide
at least three inches of clearance between the rear of the sight and your eye when in the shooting position. While 1X power/magniîcation
sights have unlimited eye-relief, always ensure there is an adequate amount of space between your face and the optic to account for îrearm
recoil.
If mounting directly to an adapter plate (common for optics ready pistols), follow the manufacturerâs instructions for attaching the adapter
plate. Unless otherwise speciîed by the 3rd party manufacturer, be sure to remove any clearance by gently forward loading the plate during
fastening. When attaching the red dot sight to the adapter plate, gently forward load the sight body while fastening. This both removes
clearances that may otherwise shift under recoil and improves the chances of repeatable mounting should the red dot sight need to be
removed for any reason such as maintenance.
If using the included mount, loosen the socket head T15 Torx screw on the mount of the sight using the provided tool, so that the locking
bar can clamp around the rail. Position the mount on your base rail so that the cross-bolt engages a slot. Forward load the mount, so that
the cross-bolt engages the forward face of the chosen mounting slot and clearance is removed. Tighten the T15 Torx bolt. CAUTION: Do
not overtighten. Torque should be set to 15 lb *in f (pound-force inch) for the two sight-to-base screws and 25 lb *in for the mount cross-bolt.f
Remember, not all sights or scopes are compatible with all firearm bases. If there is any doubt in your mind, you should seek the advice
of your local retailer or gunsmith.
LeupoldÂŽ and DeltaPointÂŽ are registered trademarks of Leupold & Stevens, Inc.
GLOCKÂŽ and M.O.S.ÂŽ are registered trademarks of GLOCK, Inc.
Product specificaties
| Merk: | Bushnell |
| Categorie: | Verrekijker |
| Model: | RXS250 |
Heb je hulp nodig?
Als je hulp nodig hebt met Bushnell RXS250 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Verrekijker Bushnell
6 September 2023
6 September 2023
6 September 2023
6 September 2023
6 September 2023
8 Augustus 2023
16 Mei 2023
17 Juni 2023
Handleiding Verrekijker
- Verrekijker Braun
- Verrekijker Nikon
- Verrekijker Canon
- Verrekijker Olympus
- Verrekijker Apeman
- Verrekijker Asaklitt
- Verrekijker ATN
- Verrekijker Auriol
- Verrekijker Bresser
- Verrekijker Bynolyt
- Verrekijker Dorr
- Verrekijker Focus
- Verrekijker Hama
- Verrekijker Kodak
- Verrekijker Leica
- Verrekijker Maginon
- Verrekijker Meade
- Verrekijker Minox
- Verrekijker National Geographic
- Verrekijker Nedis
- Verrekijker NEWTON
- Verrekijker Pentax
- Verrekijker Praktica
- Verrekijker Pulsar
- Verrekijker Rocktrail
- Verrekijker Rollei
- Verrekijker Technaxx
- Verrekijker Tevion
- Verrekijker Traveler
- Verrekijker Trust
- Verrekijker Vivitar
- Verrekijker Vortex
- Verrekijker Yukon
- Verrekijker Barska
- Verrekijker Kayoba
- Verrekijker Celestron
- Verrekijker Levenhuk
- Verrekijker Armasight
- Verrekijker Leupold
- Verrekijker Steiner
- Verrekijker Swarovski
- Verrekijker Zeiss
- Verrekijker Carson
- Verrekijker Swarovski Optik
- Verrekijker AGM
- Verrekijker Blaser
- Verrekijker SIG Sauer
- Verrekijker Umarex
- Verrekijker Eagle Optics
- Verrekijker Berger & SchrĂśter
- Verrekijker Snypex
- Verrekijker Goview
- Verrekijker Eschenbach
- Verrekijker Explore Scientific
- Verrekijker Liemke
- Verrekijker Night Owl
- Verrekijker SVBONY
- Verrekijker IGEN
- Verrekijker Rexing
- Verrekijker Opticron
- Verrekijker Alpen Optics
- Verrekijker Kite Optics
- Verrekijker Meopta
Nieuwste handleidingen voor Verrekijker
20 April 2024
10 April 2024
8 April 2024
30 Maart 2024
30 Maart 2024
25 Maart 2024
25 Maart 2024
25 Maart 2024
25 Maart 2024
25 Maart 2024