Buffalo TS4400D Handleiding

Bekijk gratis de handleiding van Buffalo TS4400D (4 pagina’s), behorend tot de categorie Server. Deze gids werd als nuttig beoordeeld door 23 mensen en kreeg gemiddeld 4.0 sterren uit 5 reviews. Heb je een vraag over Buffalo TS4400D of wil je andere gebruikers van dit product iets vragen? Stel een vraag

The TS4000 series will not work without disks. Please prepare 1 or more un-partitioned

HDDs for the setup process. Use either new HDD(s) or delete all partitions (and

therefore all data) with a partition editor before you start with existing HDD(s).

Step by step

1.Mount one or more HDDs to a frame and insert it in the TeraStation™.

2. Prepare the MicroSD and the USB adapter and insert the USB

adapter into a USB 2.0 port, connect power and network.

3. Move the boot switch to USB position.

4.Boot the TeraStation™.

Now the unit gives after some minutes a tone, the display

goes red and it says “push function button to start”.

5.Push the function button until beep sounds.

The display status color will be blue and sequence through these messages:

Recovery Preparing

System Recovering

FW/Updating

Recovery Finished, “Change Boot SW”

Setup Guide

TeraStation™ 4000

www.buffalo-technology.com

Product specificaties