BT Graphite 2100 Handleiding

BT Telefoon Graphite 2100

Lees hieronder de 📖 handleiding in het Nederlandse voor BT Graphite 2100 (2 pagina's) in de categorie Telefoon. Deze handleiding was nuttig voor 26 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2
User Guide
BT Graphite 2100
Ofces worldwide
The services described in this publication are subject to availability and may be
modied from time to time. Services and equipment are supplied subject to
British Telecommunications plc’s respective standard conditions of contract.
Nothing in this publication forms any part of a contract.
© British Telecommunications plc 2010.
Registered Ofce: 81 Newgate Street, London EC1A 7AJ.
Registered in England No. 1800000.
Designed and produced by The Art & Design Partnership Ltd.
Printed in China / Issue 1 / ADP04-10
70%
1 Plug in
2 Charge
3 Go!
General information
For information on safety instructions,
cleaning, technical information or
connecting to a switchboard, please
refer to the ‘General Information’
section in the full user guide at
www.bt.com/producthelp
Guarantee
Your BT Graphite 2100 is guaranteed for a period
of 12 months from the date of purchase.
Subject to the terms listed below, the guarantee
will provide for the repair of, or at BT’s or its agent’s
discretion the option to replace the BT Graphite 2100,
or any component thereof, (other than batteries),
which is identied as faulty or below standard, or as a
result of inferior workmanship or materials. Products
over 28 days old from the date of purchase may be
replaced with a refurbished or repaired product.
The conditions of this guarantee are:
• The guarantee shall only apply to defects that
occur within the 12 month guarantee period.
• Proof of purchase is required.
• The equipment is returned to BT or its agent
as instructed.
This guarantee does not cover any faults or defects
caused by accidents, misuse, fair wear and tear,
neglect, tampering with the equipment, or any
attempt at adjustment or repair other than through
approved agents.
This guarantee does not affect your statutory rights.
For further information within and outside the 12
month guarantee, please refer to the full user guide at
www.bt.com/producthelp
Product disposal instructions
The symbol shown here and on the product
means that the product is classed as Electrical or
Electronic Equipment and should not be disposed with
other household or commercial waste at the end of its
working life.
The Waste of Electrical and Electronic Equipment
(WEEE) Directive (2002/96/EC) has been put in place
to recycle products using best available recovery and
recycling techniques to minimise the impact on the
environment, treat any hazardous substances and
avoid the increasing landll.
Product disposal instructions for residential users
When you have no further use for it, please remove
any batteries and dispose of them and the product as
per your local authority’s recycling processes. For more
information please contact your local authority or the
retailer where the product was purchased.
Product disposal instructions for business users
Business users should contact their suppliers and check
the terms and conditions of the purchase contract
and ensure that this product is not mixed with other
commercial waste for disposal.
Warning
This equipment is not designed for making
emergency telephone calls when the power fails.
Alternative arrangements should be made for
access to emergency services.
R&TTE Directive & Declaration
of Conformity
This product is intended for use within the UK for
connection to the public telephone network and
compatible switchboards.
This equipment complies with the essential
requirements for the Radio Equipment and
Telecommunications Terminal Equipment Directive
(1999/5/EC).
For a copy of the Declaration of Conformity
please refer to www.bt.com/producthelp
Setting up is easy. Just follow the simple steps in this guide.
If you need further assistance, please visit our website www.bt.com/producthelp
to view our advanced user guide or call our helpdesk on *0808 100 6556
2 Charge
1 Activate the batteries by pulling the plastic
tab away from the back of the handset.
2 Place the handset on the base to charge.
3 After 24 hours, plug the telephone line cord
into the telephone wall socket.
Important: Charge the handset batteries for 24 hours
or your phone may not work.
Set up your additional handsets (multipacks only)
1 For additional handsets and chargers: plug the mains power adaptor connector
(item code 052300) into the back of the charger and plug the other end into the
mains wall socket and switch the power on.
2 Activate the batteries as explained above.
3 Place the handset on the charger to charge for 24 hours.
If you ever need to remove the batteries, simply slide open the battery
compartment cover and using the nger holes grip the batteries and pull them out.
Your BT Graphite 2100 is now ready for use.
Please
turn
over
Important: Only use the mains power adaptors, cables and rechargeable batteries
supplied in this box, or this product may not work. Any replacement rechargeable
batteries must be of the same type. BT accepts no responsibility for damage
caused to your BT Graphite 2100 by using any other type of batteries.
Check box contents
Calls
Redial
Secrecy
Menu
C
o
n
f
Calls
Redial
Secrecy
Menu
C
o
n
f
Handset
Handset Charger
Mains
power adaptor
(item code 052299)
Mains
power adaptor
(item code 052300)
Base
Contents for each additional handset (multipacks only)
* Calls made from within the UK mainland network are free. Mobile and International call costs may vary.
2 Plug in the mains
power adaptor
(item code 052299).
Secure the power
adaptor cable behind
the retaining clip on
the back of the base.
3 Plug the other end of the
power adaptor into the
wall socket and switch on.
1 Plug in
BT &
Working together, supporting energy saving products
BT & British Gas have joined forces to help our customers nd new ways to save energy
around the home, so we can all do our bit for the environment & save money too!
2x AAA Ni-MH 550mAh
rechargeable batteries
(already in handset)
2x AAA Ni-MH 550mAh
rechargeable batteries
(already in handset)
Rechargeable batteries
already fitted
Remove this tab
and charge batteries
for 24 hours before use.
Telephone line cord
(pre-installed)
1 The telephone line cord
is pre-installed but don’t
plug the other end into
the wall socket yet.
Retaining clip
9562 Graphite 2100 QSG [3].indd 1 30/4/10 12:44:08
3 Go!
Set date and time
Press
Menu
, scroll
Calls
to
CLOCK/ALARM
, press
Menu
.
DATE/TIME
is displayed, press
Menu
.
Enter date in format (DD/MM/YY), press
Menu
. If you make a mistake, press
to delete.
Enter the time in 24 hour format (HH:MM), press
Menu
to conrm.
If you have subscribed to a Caller Display service, the time will be set automatically
when you receive your rst call.
Making calls
Press then dial the phone number. Press to end the call.
Answering calls
If you have subscribed to Caller Display, the caller’s details will be displayed before you
answer (see opposite and also the full user guide online at www.bt.com/producthelp
for details).
Lift the handset from the base or charger to answer incoming calls. If the handset is
not on the base or charger, press .
Handsfree
Press during a call to switch between the earpiece and the loudspeaker.
Secrecy
During a call, press
.
SECRECY
ON
is displayed and your caller cannot hear you.
Press
to resume your call.
Redial (up to the last 10 numbers called)
Press
Redial
to open the list of most recently dialled numbers. Press
Redial
or
Calls
to scroll
through the list.
Press to redial the number displayed or press
Menu
to access the options menu.
Phonebook
Storing new phonebook entries (up to 50 entries)
Press
Menu
.
PHONEBOOK
is displayed, press
Menu
.
If entries are already stored, the rst entry will be displayed, you’ll need to press
Menu
again. Otherwise display shows
NEW
ENTRY
. Press
Menu
.
Display shows
ADD
NAME
. Using the letters on the keypad, enter the name.
You may need to press the same button a few times until the letter you want is
displayed. For example, press once for
A
,or twice for
B
. Press
Menu
.
Display shows
ADD
NUMBER
. Enter the phone number and press
Menu
to conrm.
The default melody will be displayed. Press
or
to select a melody and press
Menu
to conrm. You will hear a conrmation beep.
Dialling a phonebook entry
Press . Scroll
Calls
to the entry you want and press to dial.
Ringer volume and melody
Change handset or base ringer volume (5 levels or off)
Press
Menu
, scroll
Calls
to
SETTINGS
. Press
Menu
.
HANDSET
TONE
is displayed, press
Menu
or
scroll
Calls
to
BASE
TONES
and press
Menu
.
RING
VOLUME
is displayed, press
Menu
. Press
Redial
or
Calls
to select required volume ,
press
Menu
to conrm.
Change handset or base ringer melody
Press
Menu
, scroll
Calls
to
SETTINGS
. Press
Menu
.
HANDSET
TONE
is displayed press
Menu
or
scroll
Calls
to
BASE
TONES
and press
Menu
.
Scroll
to
RING
MELODY
, press
Menu
. Press
Redial
or
Calls
to select required melody, press
Menu
to conrm.
Your phone
Handset
Navigating the menus
Press
Menu
to enter the main menu.
Press
and
buttons to scroll through the menu options
(when you reach the end of the list, the rst option is displayed again).
Press
Menu
to select an option, or press
Secrecy
to return to the previous menu.
To exit a menu and return to standby press
repeatedly.
Menu map
Help
Most problems can be xed with a few simple checks.
Problem Solution
No dial tone Only use the cables and batteries supplied.
Make sure both the mains power adaptor cable and
telephone line cord are plugged into the correct sockets.
Poor speech quality Make sure the product is not located too close to other
electrical appliances. This can also help improve the
handset range from the base.
Battery icon empty and is
ashing slowly/handset dead
Make sure you charge the batteries for 24 hours before use
to ensure maximum battery performance.
Using broadband on the same
phone line?
Make sure you plug the phone
into the wall socket via an ADSL
microlter (not supplied), otherwise
you may have problems with this
product and your broadband service.
ADSL
microlter
Caller Display and the Calls list
You must subscribe to a Caller Display service for this feature to work. Your network
provider may charge you for this service.
View and dial from the Calls list
Press
, then
Redial
or
Calls
to scroll through the last 40 incoming calls.
Press repeatedly to switch between the number and date/time of the call.
Press to dial the entry displayed.
Press
Menu
for further options.
Copy a calls list number to the phonebook
Press
, then scroll
or
to the entry you want to copy and press
Menu
.
The display shows
SAVE
ENTRY
, press
Menu
.
Use the keypad to enter or edit the name and press
Menu
.
Edit the number if necessary, then press
Menu
. The entry is stored.
Call Waiting
You must subscribe to a Call Waiting service for this feature to work. Your network
provider may charge you for this service.
During a call, if another caller tries to reach you, you will hear a soft beep every
5 seconds.
To speak to the second caller, press , your current caller will be put on hold.
Press to switch between both callers.
Or, press to end the current call. The handset will ring, press to connect to the
waiting caller.
End a call.
Press and hold to switch
handset on/off.
Make internal calls.
Make/receive calls.
Switch handsfree on/off.
Recall for use with
switchboard/PBX and
BT Calling features.
Calls
Redial
Secrecy
Menu
C
o
n
f
Opens phonebook.
Soft key: Use with icons
displayed on the screen
above the key.
Opens menu.
Selects menu options.
Soft key: Use with icons
displayed on the screen
above the key.
During a call, press to
mute your voice so your
caller cannot hear you.
Press and hold to turn
the ringer on/off.
Opens redial list.
Scroll up.
Increase volume.
Opens Calls list.
Scroll down.
Decrease volume.
Find out more
• New Frequently Asked Questions available at www.bt.com/producthelp
• If you need more detailed instructions, a full user guide is available to
download from www.bt.com/producthelp
• If you cannot nd the answer to your problem in the full online user guide,
then please call our free Helpline on 0808 100 6556*. Our dedicated advisors
are more likely to be able to help you than the retailer where you made
your purchase.
• This document is also available in other formats, such as Large print, Braille
and Audio CD. If you would like a copy, please call 0808 100 6556*.
Press and hold to lock/
unlock the keypad.
Indicates new calls in the
calls list. To remove the
icon you need to view
missed calls. See the Caller
Display section opposite.
Battery status indicator.
Ringer off.
Keypad lock on.
Alarm set.
Menu
Calls
C
o
n
f
Secrecy
Redial
Phonebook.
Handsfree in use.
Flashes when there
is an incoming call.
Range indicator:
On=in range.
Flashing=out of range or not
registered to base.
Some menus are accessed by pressing the relevant feature button:
Press to access the phonebook.
Press
to access the redial list.
Press
to access the calls list.
PHONEBOOK
(Menu only
appears when
phonebook is
empty. With
entries stored,
press
Menu
again to
enter the menu).
ADD ENTRY
VIEW ENTRY
EDIT ENTRY
DELETE ENTRY
DELETE ALL
CLOCK/ALARM
DATE / TIME
TIME FORMAT
ALARM
ALARM TONE
SETTINGS
HANDSET TONE
HANDSET NAME
AUTO ANSWER
BASE TONES
ADVANCED SET
REGISTRATION
DE-REGISETR
PIN CODE
PHONE RESET
BT SERVICES
HELPDESK
BT 118500
VOICE MAIL
DIVERT CALLS
CALL WAITING
RINGBACK OFF
WITHHOLD ID
Press and hold to insert
a pause in a number to
be dialled.
9562 Graphite 2100 QSG [3].indd 2 30/4/10 12:44:13


Product specificaties

Merk: BT
Categorie: Telefoon
Model: Graphite 2100

Heb je hulp nodig?

Als je hulp nodig hebt met BT Graphite 2100 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Telefoon BT

Handleiding Telefoon

Nieuwste handleidingen voor Telefoon