BSS Audio Soundweb London BLU-SI Handleiding

Bekijk gratis de handleiding van BSS Audio Soundweb London BLU-SI (6 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 13 mensen en kreeg gemiddeld 4.7 sterren uit 2 reviews. Heb je een vraag over BSS Audio Soundweb London BLU-SI of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Using the BLU-SI option card

The BLU-SI option card provides BLU Link connectivity for Soundcraft Si Compact,

Si Performer and Si Expression consoles. NOTE: Si1, Si2 and Si3 do not support the BLU-

Si option card. 32 channels can be transmitted onto the BLU Link bus and 32 channels

can be received from the BLU Link bus. DIP switches allow the selection of consecutive

channels in groups of 32. (The BLU Link card with the red DIP switches is mounted onto

the carrier card with the black DIP switches.) The BLU-Si is only supported in the following

console software versions:

Si Compact v3.0 or above / Si Performer v1.5 or above / Si Expression v1.5 or above

Setting up the BLU-SI option card (single use)

WARNING: Before installing or removing the option card, make sure the mains power

cord is unplugged.

Adjust the red DIP switches to select the group of channels required using the table

below. (On = Up) The transmit and receive channels should

not

be the same.

In the example below, the red DIP switches will set the card to transmit channels

1-32 onto the BLU Link bus and receive channels 33-64 from the BLU Link bus.

The black DIP switch must be left with its default settings as shown in the table

below. No other settings are valid.

Soundweb

TM

London

1

Product specificaties