BSS Audio Soundweb London BLU-6 Handleiding

Bekijk gratis de handleiding van BSS Audio Soundweb London BLU-6 (2 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 34 mensen en kreeg gemiddeld 4.8 sterren uit 8 reviews. Heb je een vraag over BSS Audio Soundweb London BLU-6 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Connecting the BLU-3, BLU-6,

sw9012US and sw9015US

bssaudio.com

The BLU-3 and BLU-6 are resistor based controls that

connect to the Control Inputs on the back of a

Soundweb device. The BLU-3 and BLU-6 are UK

standard switch plate dimensions. The sw9012US and

sw9015US are the same controls in US switch plate

dimensions.

The BLU-3 and sw9012US have the same controls; a five position rotary

selector switch and a rotary potentiometer. These controls require 3-conductor

wire to connect back to the Control Inputs on the Soundweb device.

The BLU-6 and sw9015US have the same controls; an eight position rotary

selector switch and an Up / Down button pair. These controls require

4-conductor wire to connect back to the

Control Inputs on the Soundweb device.

On the BLU-3 there are connections labeled;

GND, 1 and 2. The GND terminal is

connected back to the ‘C’ or Common

terminal on the Control Inputs of the Soundweb

device. The ‘1’ terminal is for the Source Select

and is connected back to a numbered Control

Input on the Soundweb device. The ‘2’ terminal

is for the Level and is connected back to a

different numbered Control Input on the

Soundweb device. Each Soundweb London

chassis can support connections for up to six

BLU-3 or sw9012US controllers.

Soundweb

TM

London

2-wire mode

Product specificaties