Brother DR-2200 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Brother DR-2200 (2 pagina's) in de categorie Printer drum. Deze handleiding was nuttig voor 41 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2
Toner that doesn’t cost the earth
Print on recycled paper, using refilled cartridges
© Zinetic.co.uk. All Rights Reserved
INSTRUCTIONS FOR RESETTING BROTHER DR2200 DRUM
Before you begin
Don’t touch the drum cylinder or expose it to sunlight. The drum is
very sensitive to light and also touch and is very easy to damage.
The Brother printer counts drum rotations and shuts the drum unit down when it reaches its page yield of
12,000 pages at 5% coverage.
If your drum was working correctly prior to the "DRUM STOP" message appearing, you can reset the drum
unit on your printer and continue printing. We do this by telling the printer we have installed a new drum unit.
1. With the printer switched ON - Remove drum unit and toner cartridge from the printer.
(they are joined together)
2. Replace drum unit and toner cartridge back into the printer.
3. We now need to reset and trick the printer into thinking you have a new drum installed.
4. Open the front cover of the printer
HL PRINTERS
DCP / MFC PRINTER
5. Now we need to tell the printer that a ne drum was installed and reset the drum counter
HL PRINTERS
Press and hold down button for about 4 seconds Go
until all the LEDs light up.
Once all 4 LEDs are lit, release the button Go
DCP / MFC PRINTERS
Press Clear. To confirm you are installing a new drum
unit, press 1
When the LCD shows Accepted, close the front cover
Your drum unit has been reset !
Toner that doesn’t cost the earth
Print on recycled paper, using refilled cartridges
© Zinetic.co.uk. All Rights Reserved
Resetting the drum unit will not improve print quality. It only resets your drum and allows you to continue to
print. You decide when to replace the drum unit not the manufacturer !
FAQS
Can I improve print quality?
Small print defects can sometimes be cleared simply by cleaning the corona wire on the drum unit.
Remove the drum and cartridge from the printer. Separate the drum from the toner cartridge.
Clean the primary corona wire inside the drum unit by gently sliding the blue tab from right to left and left to
right several times. Return the tab to the home position before you put the drum unit back in the printer. If
you do not, printed page may have a vertical stripe.
Help my drum didn’t reset!
If the Drum LED is ON after you tried the reset, try cleaning the metal contacts with a dry lint-free soft cloth.
You may need to also power off your printer and computer for 5 minutes to clear the memory if the reset does
not work first time.
Zinetic is not associated with or endorsed by any of the cartridge / printer manufacturers referred to in any of
our published works. Names of manufacturers, machines and part numbers are given as an aid to
identification only. Names of manufacturers, machines and part numbers may be trade marks of the
respective manufacturer. All Trade Marks hereby expressly acknowledged.


Product specificaties

Merk: Brother
Categorie: Printer drum
Model: DR-2200
Kleur van het product: Zwart
Gewicht: 410 g
Gewicht verpakking: 700 g
Soort: Origineel
Afmetingen verpakking (BxDxH): 366 x 117 x 231 mm
Compatibiliteit: FAX-2840, FAX-2845, FAX-2940, HL-2130, HL-2135W, HL-2240D, HL-2240, HL-2250DN, HL-2270DW, DCP-7055, DCP-7055W, DCP-7060D, DCP-7065DN, DCP-7070DW, MFC-7360N, MFC-7460DN, MFC-7860DW
Printtechnologie: Laserprinten
Afmetingen (B x D x H): 288 x 185 x 50 mm
Code geharmoniseerd systeem (HS): 84439990
Paginaopbrengst: 12000 pagina's

Heb je hulp nodig?

Als je hulp nodig hebt met Brother DR-2200 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Printer drum Brother

Handleiding Printer drum

Nieuwste handleidingen voor Printer drum

Yamaha

Yamaha DD-65 Handleiding

12 April 2023