Britax-Romer Discovery SL Handleiding

Britax-Romer Autostoel Discovery SL

Lees hieronder de 📖 handleiding in het Nederlandse voor Britax-Romer Discovery SL (9 pagina's) in de categorie Autostoel. Deze handleiding was nuttig voor 21 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/9

01 02

Seat cushion

ISOFIT Locking arms

Belt guide (bright red)

ISOFIX insertion aids

ISOFIX attachment points (car)

Belt holder

Compartment for user manual

Adjustment belt

ISOFIT Adjustment button

Backrest

Headrest adjustment handle

Headrest

ISOFIT Locking button

www.britax.com

2. INTRODUCTION

We are pleased that you have chosen our

DISCOVERY SL

to accompany your

child safely through a new stage of his or her life.

In order to protect your child correctly, the

DISCOVERY SL

must always be

used and installed as described in these instructions.

If you have any further questions regarding its use, please feel free to contact us:

These instructions use the following symbols stated below:

Symbol Keyword Explanation

DANGER! Risk of severe personal injury

WARNING! Risk of minor personal injury

CAUTION! Risk of material damage

TIP: Useful notes

Instructions that follow a set sequence are numbered.

Example:

1. Press the button...

Belt guide colours

For better dierentiation, the two vehicle seat

belts are highlighted in dierent colours. The

diagonal seat belt 18 in dark red and the lap belt

17 in bright red. The colour of the belt guides

on the child safety seat follows the same colour

scheme.

4. USE IN THE VEHICLE

Please observe the instructions for using children's restraining systems in the operating instruc-

tions of your vehicle. ISOFIX anchoring systems (see type The seat can be used in vehicles with

list) and in vehicles with a

3-point belt

Please ﬁnd the information on the seats approved for child safety classes 15 to seats of the weight

36kg operating instructions of your vehicle. in the

The is approved for two dierent methods of installation:DISCOVERY SL

Symbol Installation type Approval type Section

with the ISOFIT locking arms into the

ISOFIX fastening points in the vehicle.

Check the list of vehicle types.

semi-

universal

with the vehicle's 3-point seatbelt universal 9B

This means that the child safety seat may only be used in vehicles that are listed in the

vehicle type list enclosed. This type list is consistently kept up to date. The latest version can

be obtained from us or from www.britax.com

You can use your child safety seat as follows:

In the direction of travel Yes

Against the direction of travel No 1)

with 2-point belt No

with 3-point belt2) Yes

with ISOFIX fastening points

(between seat surface and

backrest)

Yes

on front passenger seat

Yes

on outer rear seat Yes

on centre rear seat (with3-point

belt)

Yes

1) Use is permitted on a rearward-facing vehicle seat (e.g. in a van or minibus) only if the vehicle

seat is also approved for use by adults. The seat may not be in the area of eect of an airbag.

2) The safety belt must be approved to ECE R 16 or a comparable standard (see test label on

belt with an "E" or "e" in a circle).

3) If there is a front airbag: Slide the vehicle seat a long way back and refer to any instructions

in vehicle owner's manual.

4) Cannot be used if the vehicle seat is equipped with only a 2-point belt.

15-36 kg

3. APPROVAL

BRITAX RÖMER

Vehicle child seat

Testing and certiﬁcation

In accordance with ECE* R 44/04

Group Body weight

DISCOVERY SL

II+III 15 to 36 kg

*ECE = European Standard for Child Safety Equipment

The child safety seat has been designed, tested and certiﬁed according

to the requirements of the European Standard for Child Safety Equipment

(ECER44/04). The seal of approval E (in a circle) and the approval number are

located on the orange approval label (sticker on the child safety seat).

DANGER! This approval will be invalidated if you make any modiﬁcations to

the child safety seat. Only the manufacturer is permitted to make

modiﬁcations to the child safety seat.

WARNING! Use the

DISCOVERY SL

exclusively for securing your child in your

vehicle. It is in no way suitable as a seat or toy in the home.

Never secure your child or the child safety seat with a 2-point DANGER!

belt. If you secure your child in the child seat with only a 2-point

belt, then in the event of an accident this may cause serious

injuries to your child, possibly resulting in death.

PAGE I

6. DISASSEMBLY AND DISPOSAL

1. PRODUCT OVERVIEW

1. Operate the release button of your vehicle seat buckle.

2. Pull out the diagonal belt from the dark red belt holder

06 on the headrest 12

Only for installation type A (ISOFIT):

3. Press the red ISOFIT locking button to release the

ISOFIT fastening 05 and pull out the ISOFIT locking

arm 04 . Repeat the procedure with the other ISOFIT

locking arm 04 .

4. Pull on the adjustment belt 09 until both ISOFIT

locking arms 04 are in the storage position.

ŹThe child safety seat can now be removed.

The child safety seat must always be DANGER!

secured when it is in the vehicle, even if no child is

being transported.

DISPOSAL:

Please observe the waste disposal regulations in your country.

Disposal of packaging Container for cardboard boxes

Seat cover Residual waste, thermal utilisation

Plastic parts

According to the labelling in the corresponding container

Metal parts Container for metals

Belt straps Container for polyester

buckle and tongue Residual waste

REMOVAL:

UNFASTENING YOUR CHILD:

1. To unfasten your child, use the release button of your vehicle seat buckle.

Removing the seat cover

1. Moving the headrest of the vehicle seat into the top

position.

Unhook the cover hooks

on the rear of the backrest

Remove the upper part of the cover.

4. Unhook the cover loops 21 at the bottom on the rear of

the backrest 13

5. Pull o the cover from the seat cushion 07 .

Removing the headrest cover

Unhook the cover loops

on the back of the headrest

Unhook the cover hooks

on the front of the backrest

Pull o the cover of the headrest

ŹThe cover can now be washed.

Please observe the

instructions on the washing label of the cover:

Re-ﬁtting the cover

Proceed in reverse order to put on the cover.

5. CARE AND MAINTENANCE

Please ensure that you only use the original BRITAX RÖMER replacement seat

covers, as the seat cover is an integral part of the child safety seat and fulﬁls

important functions to ensure the smooth operation of the system. You can obtain

replacement seat covers from your dealer.

• The cover can be removed and washed with a mild detergent in the delicates

programme of the washing machine (30 °C). Please observe the instructions on

the washing label of the cover.

• The plastic parts can be cleaned using soapy water. Do not use any caustic

cleaning agents (such as solvents).

DANGER! The child seat must not be used without the seat cover.

15 to 36 kg

(~4 to 12 years of age)

2000022003 15/06

DISCOVERY SL

User instructions

Britax Childcare

Britax Römer

Kindersicherheit GmbH

Blaubeurer Strasse 71

D-89077 Ulm

Germany

T.: +49 (0) 731 9345-199/-299

F.: +49 (0) 731 9345-210

E.: service.de@britax.com

www.britax.com

Britax Childcare

Britax Exelsior Limited

1 Churchill Way West

Andover

Hampshire SP10 3UW

United Kingdom

T.: +44 (0) 1264 333343

F.: +44 (0) 1264 334146

E.:

service.uk@britax.com

www.britax.com

7. SAFETY NOTES

Please take the time to read these instructions carefully and keep them

to hand in the intended storage compartment 13 on the child safety seat

at all times! The instructions must be with the child safety seat if the latter

is passed on to a third party.

DANGER! For the protection of your child:

• In the event of an accident with a collision speed of more than 10 km/h, the

child safety seat may be damaged without the damage becoming immediately

visible. In this case the child safety seat must be replaced. Please dispose of

it properly.

• As a rule, have your child safety seat checked if it was damaged (e.g if it falls

on the ground).

• Regularly check all important parts for damage. Ensure that all mechanical

parts, in particular, are fully functional.

• Never lubricate or oil parts of the child seat.

•

Never leave your child unattended in the child seat in the vehicle.

• Only allow your child to enter and exit the vehicle on the pavement side.

• Protect the child safety seat from intensive direct sunlight when it is not in use.

The child safety seat can get very hot in direct sunshine. Child skin is sensitive

and could thereby be harmed.

•

The more snugly the belt ﬁts over your child's body, the better they will be

protected. Therefore avoid putting thick clothes on your child under the belt.

• Take regular breaks on long journeys in order to give your child the

opportunity to play around.

• Use on the rear seat: Move the front seat forward far enough that you child's

feet cannot hit the backrest of the front seat (to prevent risk of injury).

DANGER! For the protection of all vehicle occupants:

In the case of an emergency stop or an accident, unsecured persons or objects

may cause injury to other vehicle occupants. Please always check that...

• the backrests of the vehicle seats are locked (i.e. that any foldable rear seat

bench latch is engaged).

• all heavy or sharp-edged objects in the vehicle (e.g. on the parcel shelf) are

secured.

• all persons in the vehicle have their seatbelts fastened.

• the child safety seat is always secured when it is in the vehicle, even if no child

is being transported.

WARNING! For your protection when handling the child seat:

• Never use the child safety seat free-standing, not even for test sitting.

• When swivelling up the backrest 13 , nothing must come between the

backrest 13 and the seat cushion 07 . You or your child could pinch your

ﬁngers, injuring them.

•

To avoid damage, ensure that the child safety seat is not jammed in between

hard objects (car door, seat rails, etc.).

•

Keep the child safety seat in a safe place when it is not in use. Do not place any

heavy objects on the seat and do not store it directly next to sources of heat or

in direct sunlight.

CAUTION! To protect your vehicle:

•

Certain car seat covers made from more sensitive materials (e.g. velour, leather,

etc.) may sustain signs of wear and tear when using child safety seats. For

optimum protection of your car seat covers, we recommend using the BRITAX

RÖMER car seat protector from our range of accessories.

PAGE II

A correctly set headrest 12 ensures that the diagonal seat belt section 18 is

optimally positioned, and gives your child optimum protection.

The headrest 12 must be adjusted so that there is a space two ﬁngers wide

between the headrest 12 and your child's shoulders.

To adjust the height of the headrest to ﬁt your child:

1. Unhook the adjustment handle 11 on the back of

the headrest 12 .

This unlocks the headrest.

2. You can now move the unlocked headrest 12 to

the desired height. As soon as you release the

adjustment handle 11 , the headrest 12 will lock

into place.

3. Place the child safety seat on the vehicle seat.

4. Have your child sit down in the child safety seat and

check the height. Repeat the procedure until the

headrest 12 has the correct height.

8. ADJUSTING THE HEADREST

9. INSTALLATION

With ISOFIT + 3-point belt

10. SECURING YOUR CHILD

With 3-point belt

7. Push both ISOFIT locking arms 04 into the insertion

aids 02 until the ISOFIT locking arm 04 engages

with a clicking sound.

Check that the ISOFIT locking arm is DANGER!

correctly engaged 04 by pulling on it.

9. Press the red ISOFIT locking button

to ensure

that the hook on the ISOFIT locking arm

is open

and ready for use.

10. Push both ISOFIT locking arms 04 into the insertion

aids 02 until the ISOFIT locking arm 04 engages

with a clicking sound.

Check that the ISOFIT locking arm is DANGER!

correctly engaged 04 by pulling on it.

12. Give the child safety seat a ﬁrm pull forwards to

ensure that it is securely fastened and check the

ISOFIT locking arms 04 again to ensure that both

are fully locked in place.

13. Carry out the steps in Section 10 "SECURING

YOUR CHILD".

For the safety of your child, before every journey in the car check that...

Źthe child safety seat is slotted in on sides with the ISOFIT locking arms both

04 in the ISOFIT fastening points 01 ;

Źthe child safety seat is securely fastened;

Źthe lap belt 17 runs in the bright red belt guides on both sides of the seat

cushion 03 ,

Źthe diagonal seat belt section 18 on the side of the vehicle seatbelt buckle

19 also runs through the light red belt guide 03 of the seat cushion,

Źthe diagonal seat belt section 18 runs through the dark red belt holder 06 of

the headrest,

Źthe diagonal seat belt section 18 runs diagonally backward,

Źthe straps are tight and twisted,not

Źthe seatbelt buckle 19 be positioned on the red belt guide must not 03 in

the seat cushion.

DANGER! If your child tries to open

the red ISOFIT safety button

or the

vehicle belt buckle

, stop the vehicle as soon as safely possible.

Check whether the child safety seat is correctly fastened and

ensure that your child is correctly secured. Explain to your child the

dangers associated with his actions.

1. If your vehicle is not ﬁtted with ISOFIX insertion aids by standard, clamp

the two insertion aids 02 , which are included in the scope of delivery of the

seat*, with the section pointing upwards to the two ISOFIX fastening points

01 of your vehicle.

TIP!

The ISOFIX fastening points are located between the surface and the backrest

of the vehicle seat.

The insertion

aids facilitate the installation of the child safety seat with the use of the

SOFIX fastening points and prevent damage to the car seat covers. As long as they

are not used, remove them and keep them in a safe place. For vehicles with foldable

a backrest, the insertion aids need to be removed before folding the backrest. Any

problems occurring usually come from soiling or external objects on the insertion aids

and on the hook. Remove soiling or external objects to rectify such problems.

2. Moving the headrest of the vehicle seat into the top position.

3. Carry out the steps in Section 8 "ADJUSTING THE HEADREST".

4. Place the child seat facing forward (in the direction of travel) on a suitable

vehicle seat.

The

DISCOVERY SL

is installed permanently in the vehicle with the ISOFIT locking

arms.

Your child is then buckled into the child seat with the vehicle's 3-point seatbelt.

5. Hold the ISOFIT adjustment button 08 down and

fully extend the ISOFIT locking arm furthest from the

vehicle door 04 .

6. Press the red ISOFIT locking button

to ensure that

the hook on the ISOFIT locking arm

is open and

ready for use.

0504

8. Hold the ISOFIT adjustment button 08 down and

fully extend the ISOFIT locking arm nearest to the

vehicle door 04 .

UNFASTENING YOUR CHILD AND REMOVAL:

To unfasten your child or to remove the child safety seat, observe the steps in

Section 6 "REMOVAL AND DISPOSAL" [PAGE I]

0504

1. Carry out the steps in Section 8 "ADJUSTING THE

HEADREST".

2. Place the child seat on the vehicle seat. Ensure that

the backrest 13 is ﬂush with the backrest of the

vehicle seat.

If the headrest of the vehicle seat gets in the Tip!

way, turn it the other way.

3. Carry out the steps in Section 10 "SECURING

YOUR CHILD".

For the safety of your child, before every journey in the car check that...

Źthe child safety seat is securely fastened;

Źthe lap belt

runs in the bright red belt guides on both sides of the seat

cushion

Źthe diagonal seat belt section 18 on the side of the vehicle seatbelt buckle

19 also runs through the light red belt guide 03 of the seat cushion,

Źthe diagonal seat belt section 18 runs through the dark red belt holder 06

of the headrest,

Źthe diagonal seat belt section 18 runs diagonally backward,

Źthe straps are tight and twisted,not

Źthe seatbelt buckle 19 on the red belt guide must not be positioned 03 in

the seat cushion.

If your child tries to open the vehicle belt buckle DANGER! 19 , stop the

vehicle as soon as safely possible. Check whether the child

safety seat is correctly fastened and ensure that your child is

correctly secured. Explain to your child the dangers associated

with his actions.

UNFASTENING YOUR CHILD AND REMOVAL:

To unfasten your child or to remove the child safety seat, observe the steps in

Section 6 "REMOVAL AND DISPOSAL" [PAGE I]

The

DISCOVERY SL

is not installed permanently in the vehicle. It is simply

secured together with your child using the vehicle's 3-point seatbelt.

1. Have your child sit down in the child seat.

2. Pull out the vehicle belt and guide it in front of your

child to the vehicle seat buckle 19.

Ensure the vehicle belt is not twisted, as DANGER!

otherwise the full protective eect of the

retaining system is not ensured.

3. Engage the buckle tongue in the vehicle seat buckle

19 with a CLICK!

4. Place the diagonal seat belt section 18 and lap

belt section 17 on the side of the vehicle seatbelt

buckle 19 into the light red belt guide 03 of the seat

cushion.

DANGER! The vehicle seatbelt buckle 19 must not

be positioned between the light red belt

guide 06 and the armrest.

5. Also place the lap belt section 17 on the other side

of the seat cushion in the light red belt guide 03 .

The lap belt section DANGER! 17 must lie as low

as possible over your child's hips on both

sides.

6. Guide the diagonal seat belt section 18 into the dark

red belt holder 06 of the headrest 14 until it lies

completely in the belt holder 09 and is not twisted.

If the backrest Tip! 16 conceals the belt holder 06 ,

you can adjust the headrest 14 upwards. The diagonal

seat belt section 18 can now be easily inserted. Now

return the headrest 12 to the proper height.

7. Make sure that the diagonal belt 18 runs over your

child's shoulder, and not in front of his or her neck.

You can still adjust the height of the headrest Tip! 12

again here in the vehicle.

The diagonal seat belt section DANGER! 18 must

run diagonally backward. You can adjust

the course of the belt with your vehicle's

adjustable belt deﬂector.

The diagonal belt DANGER! 18 must never be

directed forwards to the belt deﬂector

on the vehicle. In this case, use the child

safety seat on the back seat only.

Tighten the vehicle seat belt by pulling on the diagonal

seat belt section

18 .

9. Observe the further steps and the safety

instructions of the relevant installation type.

17 03

If you have any further questions regarding its use, please feel free to contact us:

18 12

11. Pull on the adjustment belt 09 and push the child

seat backwards at the same time, until the die

backrest 13 is ﬂush with the backrest of the vehicle

seat.

Britax Childcare

Britax Römer

Kindersicherheit GmbH

Blaubeurer Strasse 71

D-89077 Ulm

Germany

T.: +49 (0) 731 9345-199/-299

F.: +49 (0) 731 9345-210

E.: service.de@britax.com

www.britax.com

Britax Childcare

Britax Exelsior Limited

1 Churchill Way West

Andover

Hampshire SP10 3UW

United Kingdom

T.: +44 (0) 1264 333343

F.: +44 (0) 1264 334146

E.:

service.uk@britax.com

www.britax.com

Product specificaties

Merk:	Britax-Romer
Categorie:	Autostoel
Model:	Discovery SL

Heb je hulp nodig?

Als je hulp nodig hebt met Britax-Romer Discovery SL stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Autostoel Britax-Romer

Britax-Romer Flex Base Isense Handleiding

18 Juni 2023

Britax-Romer Dualfix iSense Handleiding

17 Juni 2023

Britax-Romer KIDFIX II XP SICT Handleiding

16 Juni 2023

Britax-Romer Trifix Handleiding

14 Juni 2023

Britax-Romer Kidfix SICT Handleiding

12 Juni 2023

Britax-Romer KID PLUS Handleiding

10 Juni 2023

Britax-Romer Max-Way Handleiding

8 Juni 2023

Britax-Romer Max-Fix Handleiding

7 Juni 2023

Britax-Romer ISOFIX Adapter Handleiding

5 Juni 2023

Britax-Romer Swingfix M i-Size Handleiding

5 Juni 2023

Handleiding Autostoel

Nieuwste handleidingen voor Autostoel

Apramo Artemis Handleiding

26 April 2024

Baninni Carmona Handleiding

17 April 2024

Baninni Arona Isofix BN2001 Handleiding

17 April 2024

Baninni BN361 Handleiding

17 April 2024

Peg Perego Viaggio Shuttle Handleiding

16 April 2024

Chipolino Aviato Handleiding

8 April 2024

BeSafe Go Beyond Lite Handleiding

18 Maart 2024

BeSafe Beyond Handleiding

18 Maart 2024

BeSafe Flex FIX 2 Handleiding

18 Maart 2024

Lionelo Lavender i-Size Handleiding

14 Maart 2024