Bretford CORE24MS-CTTZ Handleiding

Bretford Niet gecategoriseerd CORE24MS-CTTZ

Lees hieronder de 📖 handleiding in het Nederlandse voor Bretford CORE24MS-CTTZ (3 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 21 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/3

USER GUIDE

CORE™ 36M CART

CORE36MS-CTTZ • CORE36MSBP-CTTZ

TECHNICAL SPECIFICATIONS

CAPACITY

36 Devices

COMPATIBILITY

Designed for various sized Chromebooks, yet versatile enough

to support most tablets, laptops/hybrids and ultrabooks. Uses

device manufacturer supplied AC power cord.

UNIT DIMENSIONS

25.25”W x 26.5”D x 41.3875”H

SLOT DIMENSIONS

1.25”W x 14.75”D x 9.875”H

WEIGHT WITHOUT DEVICES

142 lbs.

WARRANTY

For product specic warranty information, please visit

bretford.com/warranty

TIMER

Digital

SHIPPING

Ships fully assembled

IMPORTANT USER NOTES

• Product is for indoor use only.

• User can plug in 36 devices at one time.

• urn power switch off before plugging in devices.T

• urn power switch off before unplugging the cart.T

• Do not plug the cart in if the switch or power

cord has been damaged.

•Do not plug the power cord into another extension cord

or re-locatable power tap.

• Be sure to turn power switch off and unplug cart before

moving to a different location.

•Ensure casters are locked before opening cart doors.

•Be sure to lock up cart in a secure environment after

every use.

•Do not share the lock combination code with any

unauthorized persons.

•The socket-outlet shall be installed near the equipment

and shall be easily accessible.

MADE IN THE USA

GENERAL USE

POWER SWITCH

Located on the right hand side of the cabinet.

AC OUTLET ACCESS – ADAPTER STORAGE

Bins provide convenient adapter storage. Plug adapters into AC outlets as needed. Use VELCRO® straps to secure power adapters.

DEVICE STORAGE

Polypropylene dividers store devices vertically and oer optimal spacing for device compatibility.

AC Outlet Access – Adapter Storage Device Storage

Cord Winder and Power Switch

USER GUIDE | CORE 36M CART ™

Using the Handle Inserting The Shackle / Lock Programming Interior Door Lock Holder

TORQUE RESISTANT HANDLE & LOCK INSTRUCTIONS

USING THE HANDLE

The torque resistant handle/lock serves as a handle to open and close the cabinet when the shackle is not inserted.

INSERTING THE SHACKLE

Hold the lock shackle on a slight angle when inserting into the shackle opening and push rmly. Once the shackle is inserted the cam is

no longer engaged and the torque resistant handle/lock will spin which deters access to devices by lowering the risk of the cam breaking.

LOCK PROGRAMMING

To program the user programmable combination padlock included:

1. Open the padlock using combination “0000.”

2. Insert the programming key and turn 90 degrees.

3. Set the combination you would like to use.

4. Remove the programming key.

DEVICE STORAGE & CABLE MANAGEMENT

1. Starting in the rear of the cart, insert a power adapter in the

storage bin for the associated device storage shelf (top, middle

or bottom).

2. Measure the amount of cable necessary to reach from the

power adapter located in the bin to the front of the cart, (around

the AC outlet box, through the divider panel and through the

cable management hooks). Leave sucient slack for the power

connector to connect to the device.

3. Wrap remaining cable to the power adapter using one of

the VELCRO® straps that came with the cart.

4. Plug the AC cord into one of the outlets nearest to where

the brick is located in the bin.

5. Repeat the above process for the 36 device’s power

adapters and cables.

6. Insert a device into each of the 36 device slots.

7. Plug the power connector into each of the 36 devices.

8. Place cart near a wall outlet and plug cart in.

9. Turn on the power switch (on the cord-winder side of the cart).

10. Once the timer is turned on, it begins rotating power to the

dierent power strips every three (3) minutes. This allows for

ecient charging of the devices in the cart from one 15

amp wall circuit.

11. Only one group of the total devices in the cart will be

charging at a time–rotating every three minutes.

12. Supplied numbered stickers can be applied to shelves in

front of dividers, for slot numbering, if desired.

USER GUIDE | CORE 36M CART ™

Part #031-10065 • V 06 7 6.201

Bretford, B design, and Core are trademarks or registered marks of Bretford Manufacturing,

referenced product names and logos are trademarks of their respective owners.

REMOVING REAR ACCESS PANEL

(CORE36MSBP-CTTZ)

Using the included T2511 Torx bit, remove the four screws

securing the rear adapter access panel. Use the handle

cutout to remove the panel. Inside, plug adapters into AC

outlets as needed, and secure with velcro straps. Reattach

rear adapter access panel using T2511 Torx bit and included

security screws.

Tools required: Multi-Bit screwdriver, T2511 Torx bit (included)

1. Insert the T2511 Torx bit into your Multi-Bit screwdriver.

2. Remove the four security screws from the back adapter

access panel.

3. Remove the rear adapter access panel.

4. Install your power adapters as needed.

5. Replace the rear adapter access panel.

6. Replace the four security screws, securing the rear

adapter access panel, using the included TORX 2511 bit.

Product specificaties

Merk:	Bretford
Categorie:	Niet gecategoriseerd
Model:	CORE24MS-CTTZ
Kleur van het product:	Blue, White
Gewicht:	59900 g
Breedte:	614 mm
Diepte:	673 mm
Hoogte:	1051 mm
Soort:	Wagentje voor draagbaar apparaatbeheer
Materiaal behuizing:	Staal
Stroom:	12 A
Plaatsing:	Vloer
Meegeleverde kabels:	AC
Met slot:	Ja
Aantal schappen:	2 schappen
Handvat(en):	Ja
AC-ingangsspanning:	120 V
AC-ingangsfrequentie:	50 - 60 Hz
Maximale schermgrootte:	- "
Number of devices supported:	24
Ondersteunde draagbare apparaten:	Notebook, Tablet
Slot type:	Combinatieslot
Sleufbreedte:	31.7 mm
Sleufdiepte:	375.9 mm
Sleufhoogte:	228.6 mm