Bresser Lightning Sensor 7009976 Handleiding

Bekijk gratis de handleiding van Bresser Lightning Sensor 7009976 (2 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 3 mensen. Heb je een vraag over Bresser Lightning Sensor 7009976 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Art.No. 7009976

Lightning sensor

868MHz

LIGHTNING SENSOR

EN

INSTRUCTION MANUAL

IMPORTANT NOTE

•Read and keep these instructions.

•Do not cover the ventilation holes with any

items such as newspapers, curtains etc.

•Do not clean the unit with abrasive or

corrosive materials.

•Do not tamper with the unit’s internal

components. This invalidates the warranty.

•Only use fresh batteries. Do not mix new and

old batteries.

•Do not dispose old batteries as unsorted

municipal waste. Collection of such

waste separately for special treatment is

necessary.

•Attention! Please dispose of used unit or

batteries in an ecologically safe manner.

•Technical specifications and user manual

contents for this product are subject to

change without notice.

CAUTION

•Danger of explosion if battery is incorrectly

replaced. Replace only with the same or

equivalent type.

•Battery cannot be subjected to high or low

extreme temperatures, low air pressure

at high altitude duning use, storage or

transportation.

•Replacement of a battery with an in correct

type that can result in an explosion or the

leakage of ammable liquid or gas.

•Disposal of a battery into re or a hot oven,

or mechanically crushing or cutting of a

battery, that can result in an explosion.

•Leaving a battery in an extremely high

temperature surrounding environment that

can result in an explosion or the leakage of

ammable liquid or gas.

•A battery subjected to extremely low air

pressure that may result in an explosion or

the leakage of ammable liquid or gas.

•An appliance is only suitable for mounting

at height ≤ 2m

CE DECLARATION OF CONFORMITY

Hereby, Bresser GmbH declares that

the equipment type with part number:

7009976 is in compliance with

Directive: 2014/53/EU. The full text of the CE

declaration of conformity is available at the

following internet address:

www.bresser.de/download/7009976/CE/7009976_CE.pdf

NOTES ON CLEANING

•Remove the batteries before cleaning.

•Only use a dry cloth to clean the exterior of the

device. To avoid damaging the electronics, do not

use any cleaning uid.

•Protect the device from dust and moisture.

WARRANTY & SERVICE

The regular guarantee period is 2 years and

begins on the day of purchase. You can consult

the full guarantee terms and details of our

services at www.bresser.de/warranty_terms.

Would you like detailed instructions for this

product in a particular language? Then visit our

website via the link below (QR code) for available

versions.

www.bresser.de/warranty_terms

OVERVIEW

868MHz

LIGHTNING SENSOR

1. Lightning indicator

2. Noise indicator

3. Transmission status LED

4. Wall mounting holder

5. [SENSITIVITY], slide switch to assign the

sensor sensitivity to High/Mid/Low/Default

6. button[RESET]

7. Battery compartment

GETTING STARTED

1. Remove the battery door.

2. Slide the slide switch to [SENSITIVITY]

choose a sensitivity mode

3. Insert 2 x AA size batteries into the battery

compartment according to the polarity mark

on the battery compartment..

4. Close the battery door.

5. After inserting batteries, the transmission

status LED will light up 1 sec

NOTE:

The required batteries are not included!

-Once the sensitivity mode is assigned you can

only change it by removing the batteries or

resetting the unit.

-Avoid placing the sensor in direct sunlight, rain

or snow.

LED INDICATOR

The ashing mode of lightning indicator and

noise indicator means:

Flashing modeDescription

Long ash

One lightning strike was

detected.

Short ash

Noise signals was detected,

reminding the user that

current location has high level

noise. Please nd another

location of lower noise level.

SENSITIVITY SLIDE SWITCH

-The sensor is intended to be installed

outdoor under sheltered areas away from

noise generated by switches and household

appliances that may trigger false lightning.

-Default Setting (DF) is for sensitivity between

high and mid levels. If you think the sensor

picked up a lot of false lightning strikes, then

please try with sensitivity Mid (MI) or Low

(LO). If the sensor missed lightning detection,

you may try with sensitivity High (HI).

PAIRING THE WIRELESS SENSORS

WITH THE CONSOLE

The console will automatically search and

connect to your lightning sensor. Once your

sensor pair up successful, the sensor signal

strength indication and weather information will

appear on your console display.

NOTE:

Every reading transmission, the transmission

status LED will ash at once.

RESET THE SENSOR

In case of mal-function, press the button [RESET]

to reset the sensor.

HOW TO PLACE THE SENSOR

-Choose a location on the exterior of the home

where can shield the sensor from direct

sunlight or wet conditions for an accurate

reading.

-Minimize obstructions such as doors, walls,

furniture, etc.

-Hang it with the wall mount hole or place it

directly on at surface, and make sure the

transmission is within 150 meters approx.

SPECIFICATIONS

Dimensions (WxHxD)125 x 58 x 19 mm

Weight144g (with batteries)

Main power

2 x AA size 1.5V

batteries (Lithium

battery recommended

for low temperature

environment)

Weather data

Lightning strike and

distance

RF frequency868MHz

RF transmission range

150m (490 feet) straight

distance

Lightning detection

range

0 ~ 40 km / 0 ~ 25 miles

RF normal Transmis-

sion interval

60 seconds

Operating temperature

range

-20 ~ 60°C (-20 ~ 140°F)

Operating humidity

range

RH 1% to 99 %

DISPOSAL

Dispose of the packaging materials

properly, according to their type, such as

paper or cardboard. Contact your local

waste-disposal service or environmental

authority for information on the proper

disposal.

Do not dispose of electronic devices in

the household garbage! As per the

Directive 2002/96/EC of the European

Parliament on waste electrical and electronic

equipment and its adaptation into German law,

used electronic devices must be collected

separately and recycled in an environmentally

friendly manner.

Bresser GmbH

Gutenbergstr. 2

DE-46414 Rhede

Germany

Bresser UK Ltd.

Suite 3G, Eden House, Enterprise

Way, Edenbridge, Kent TN8 6HF,

Great Britain

Service:

Web: www.bresser.de/weather

E-Mail: service@bresser.de

Manual_7009976_Lightning-sensor_de-en_BRESSER_v072024a

Find us on:

Product specificaties