Bresser BR-2504X8C-B1 Handleiding

Bekijk gratis de handleiding van Bresser BR-2504X8C-B1 (2 pagina’s), behorend tot de categorie Statief. Deze gids werd als nuttig beoordeeld door 2 mensen en kreeg gemiddeld 4.6 sterren uit 4 reviews. Heb je een vraag over Bresser BR-2504X8C-B1 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

BR-2504X8C-B1

Carbon Camera Tripod · Carbon Camerastatief

Carbon-Kamerastativ

Art. No. F004244

GB

Instruction Manual

NL

Handleiding

DE

Bedienungsanleitung

www.bresser.de/PF004244

INFOS+DOWNLOADS:

Errors and technical changes reserved. · Fouten en technische wijzigingen voorbehouden.

Irrtümer und technische Änderungen vorbehalten.

Manual_F004244_BR-2504X8C-B1-Tripod_en-nl-de_v062026 a

Bresser GmbH

Gutenbergstraße 2

46414 Rhede · Germany

Tel. +49 (0) 2872 80 74 190

service@bresser.de

www.bresser.de

@BresserEurope

Bresser Benelux / Folux B. V.

Donau 5-12

7908 HA Hoogeveen

Nederland

Tel. +31 (0) 528 23 24 76

[email protected]

Bresser UK Ltd.

Eden House · Enterprise Way

Edenbridge, Kent TN8 6HF

Great Britain

Phone +44 (0) 1342 8370 98

[email protected]

GB

ABOUT THIS MANUAL

Keep these operating instructions for future reference. If the device is

sold or passed on, the operating instructions must be passed on to any

subsequent owner/user of the product.

1. GENERAL WARNINGS

•Risk of suocation! Keep packaging materials (plastic bags,

rubber bands, etc.) away from children! They could play with them

and suocate

•Risk of crushing! This product contains moving components!

When tilting, clamping or rotating these components, there is a

risk that limbs may be crushed!

Risk of property damage!

•Proceed carefully during assembly and only as described in this

manual!

•-Do not load the tripod more heavily than specied by the manu

facturer!

•Keep children and animals away from the tripod! They could knock

it over and thereby damage it.

•The manufacturer accepts no liability for damage to the product

or to devices mounted on it as a result of incorrect assembly or

failure to observe technical specications (see“4. Technical Data”).

Fig. 1IMPORTANT!

Make sure that the ball head is securely screwed onto the tripod head

so that it cannot fall o.

5. Loosen the clamping ring (3) for the extension rod (9) by turning it

counterclockwise and extend the extension rod to the desired height.

Turn the clamping ring clockwise to x the extension rod in position.

5. USING THE BALL HEAD

1. GENERAL INFORMATION (Fig. 2)

The ball head (1) can accommodate a wide variety of camera models*

and other optical devices* (e.g. spotting scopes). The wide range of

swivel and tilt functions enables virtually any observation position.

2. MOUNTING A CAMERA* OR OTHER DEVICES*

1. Loosen the locking lever (1 b) on the ball head.

2.

Pull the quick-release plate (1 a) sideways out of the guide.

3. The

quick-release plate

must be screwed rmly to the internal thread

of the camera or optics using the matching external thread.

IMPORTANT!

Make sure that the release plate is rmly screwed to the device! A de-

vice that is not rmly mounted could come loose from the release plate

during use and fall down!

4. Slide the release plate with the mounted device back into the guide.

5. Tighten the locking lever on the ball head to secure the release plate.

3. AXIS MOVEMENTS

1. Loosen the ball locking knob (1 d and/or 1 e) to move the ball head

(c) into the desired position. Tighten the ball locking knob to x the

ball head in the current position.

2. Loosen the locking knob (1 f) to move the ball head horizontally into the

desired position. Tighten the locking knob again to x the ball head in

the current position.

6. USING THE ADAPTER BOLT

1. The Adapter Bolt is screwed in with the screw (12)

between the tripod head and ball head; see illustra-

tion on the left.

7. USE AS A MONOPOD

1. Unscrew the clamping ring for monopod (5) to

obtain a single tripod leg.

2. Unscrew the ring with hook (10).

3. Screw in the screw (12) where the ring with hook

was removed, together with the single tripod leg.

8. TECHNICAL DATA

•Material: carbon tripod, aluminium head

•Weight: 1.45 kg (including ball head)

•Load capacity: up to 10 kg

•Maximum height: 165 cm

•Quick-release plate: Arca-Swiss-compatible, 1/4“ thread

•360° panorama head with degree scale and double spirit level

•Hook on the centre column for stabilisation

*not included in the scope of delivery

NL

OVER DEZE HANDLEIDING

Bewaar deze gebruiksaanwijzing voor hernieuwd gebruik op een later

tijdstip. Bij verkoop of doorgifte van het apparaat moet de gebruiks-

aanwijzing aan elke volgende eigenaar/gebruiker van het product

worden doorgegeven.

2. SCOPE OF DELIVERY

Tripod, ball head, adapter bolt, screw, carrying bag

3. PARTS OVERVIEW

1. Ball head with

a) quick-release plate, b) quick-release knob (release

plate lock), c) ball head, d) and e) ball locking knob, f) locking knob for

horizontal movement

2. Tripod head

3. Clamping ring for the extension rod

4. Clamping lever for tripod leg

5. Clamping ring for monopod

6. Tripod legs (a) with extendable leg sections (b)

7. Clamping rings (3x) for extendable leg sections (see 6 b)

8. Feet (3x)

9. Extension rod

10. Ring with hook (unscrew to attach monopod)

11. Adapter Bolt (e.g. for microphone)

12. Screw for Adapter Bolt or for monopod mounting

4. ASSEMBLY

1. The tripod is supplied folded,

with the extension rod and

ball head on the wrong side.

2. First loosen the clamping lever

for the tripod leg (4). The tri-

pod leg should point straight

down for this. After loosening,

rotate the tripod leg once by

180° to the other side. Do the

same with the other two tri-

pod legs.

3. This now places the ball head

on the correct side.

4. Now grasp the tripod leg (6)

by the grip surface (6 a). Press

the clamping lever (4) and

at the same time spread the tripod leg outward. Release the

clamping lever to x the tripod leg in the desired position. Carry

out this process one after the other for all tripod legs.

5. Place the tripod with the legs spread out on a surface that is as

level and stable as possible.

6. Loosen the individual clamping rings (7) for the extendable leg

sections one after the other by turning them counterclockwise

and extend the leg sections to the desired length. Turn the

clamping rings clockwise to x the leg sections in the respective

position.

Fig. 2



a



b



e



d



c



f



















a





b





Product specificaties