BQ Witbox Handleiding

BQ 3D Printer Witbox

Lees hieronder de 📖 handleiding in het Nederlandse voor BQ Witbox (79 pagina's) in de categorie 3D Printer. Deze handleiding was nuttig voor 55 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/79

Witbox

User Manual

Witbox

English

WitboxUser Manual

Welcome

Thank you for choosing bq.

This manual will help you use your new 3D printer correctly.

Welcome to the world of Witbox!

How to use this manual

To ensure you use your Witbox correctly, read this manual carefully before using your

printer for the rst time.

These instructions are based on the factory settings for the device.

The images of the device shown in this manual are not binding and may be subject to

change.

bq will not be held responsible for any performance or compatibility issues arising as

a result of the modication of parameters on the part of the user.

Icon key

Note: Recommendations and notications regarding the use of your 3D printer.

> Next: Indicates the sequence of steps to follow in order to perform an action.

Tool needed: This task will require the use of a tool.

Trademarks

The Witbox and bq brands and logos are registered trademarks of Mundo Reader, S.L.

WitboxUser Manual English

CONTENTS

Introduction6

What is a 3D printer?6

6 Online resources for the Witbox

Getting started7

Box contents7

10 Basic glossary

12 Unpacking your Witbox

13 Attaching the side panels

14 Attaching the top panel

14 Attaching the print base

15 Attaching the spool and support

16 Connecting the power cable

Setting up17

Control panel17

17 Home screen

18 Main menu

18 Print from SD menu

19 Control menu

21 Preparing the print base

21 Levelling the print base

24 The importance of adhesion

25 Loadingthelament

26 First test print

27 How to remove objects from the print base

Product specificaties

Merk:	BQ
Categorie:	3D Printer
Model:	Witbox
Kleur van het product:	Zwart
Ingebouwd display:	Ja
Gewicht:	28000 g
Breedte:	505 mm
Diepte:	388 mm
Hoogte:	450 mm
Breedte verpakking:	643 mm
Diepte verpakking:	547 mm
Hoogte verpakking:	647 mm
Materiaal behuizing:	Staal
USB-poort:	Ja
Ethernet LAN:	Nee
Geïntegreerde geheugenkaartlezer:	Ja
Compatibele geheugenkaarten:	SD
Kijkglas:	Ja
Certificering:	EC
Display technologie:	LCD
Meegeleverde software:	Marlin, Slic3r, Repetier, Pronterface, Cura, ReplicatorG, Skeinforge
Printtechnologie:	Fused Filament Fabrication (FFF)
Inclusief geheugenkaart:	SD
Wifi:	Nee
Stroomverbruik (typisch):	348 W
Printmateriaal:	Polymelkzuur
Ondersteunde filamentdikte:	1.75 mm
Maximaal afdrukformaat:	297 x 310 x 200 mm
Laagdikte (min):	0.05 mm
Laagdikte (max):	0.3 mm
Aantal afdrukkleuren:	1