Bowers Wilkins M-1 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Bowers Wilkins M-1 (6 pagina's) in de categorie Luidspreker. Deze handleiding was nuttig voor 22 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/6
M-1
2
ENGLISH
www.bowers-wilkins.com
Welcome to Bowers & Wilkins and M-1
Thank you for choosing Bowers & Wilkins. When John Bowers
îȘrst established our company he did so in the belief that
imaginative design, innovative engineering and advanced
technology were keys that could unlock the enjoyment of audio
in the home. His belief is one that we continue to share and it
inspires every product we design.
Contents
ENGLISH 2
Welcome to Bowers & Wilkins and M-1 2
1 Contents 3
2 Positioning 3
2.1 2- and 2.1-channel (stereo) 3
2.2 Multi-channel home theatre 3
2.2.1 5.1-channel 3
2.2.2 6.1-channel 3
2.2.3 7.1-channel 3
3 Moving the ball socket position 4
3.1 Removing the table stand base 4
3.2 Removing and turning the back cover 4
3.3 Rotating the stem 4
4 Connecting using the table stand 5
5 Fitting and connecting using the
wall bracket 5
6 Adjusting the angle of the speaker 6
7 Rotating the badge 6
8 Environmental Information
6
ENGLISH
3
ENGLISH
1 Contents
Check that you have:
1. Speaker on table stand
2. Wall bracket cover
3. Wall bracket
The wall bracket and cover are supplied clipped
together. Pull them apart if required for installation.
If you peel off the rubber mat on the underside of the
table stand, you will îȘnd a Torx key that you will need
when making adjustments to the way the speaker is
mounted.
2 Positioning
The speakers may be used in distributed audio
applications, where they are typically mounted more
than 2.5m (8 ft) high on the wall pointing down. (see
Sections 3 & 5)
For other applications, choose where you are going
to place the speakers, using îȘgures 2-6 according to
the type of installation you want.
2.1 2- and 2.1-channel (stereo)
Figure 2 shows a range of angles to a central
listener.
If the angle is less than 40Âș, you will not get sufîȘcient
left to right separation.
If the angle is greater than 60Âș, you may begin to
detect a ‘hole in the middle’ effect, especially if
listening away from the centre line. To reduce this
effect, try toeing the speakers in to point towards a
central listener. (See Section 6 on how to adjust the
direction in which the speakers face.)
Either mount the speakers close to ear height or
angle them to point to ear height at the centre of the
listening area.
2.2 Multi-channel home theatre
Mount the front three speakers as shown in Figure
3. The height of the left and right speakers should
be as close to the centre of the screen as possible.
Their distance from the sides of the screen affects
the scale of the acoustic image. 0.5m (20 in) is a
good starting point, but experiment before îȘxing the
speakers permanently in place.
The centre speaker should be near the bottom or
top of the screen, whichever is closest to ear height.
Surround speakers are best placed at least 0.6m
(2 ft) above head height, just like in a commercial
cinema, to achieve a more diffuse effect
2.2.1 5.1-channel
For the two surround speakers, stick as close as
possible to the angle speciîȘed in Figure 4. The
proportions of the room will dictate whether the
speakers should go on the side walls or the rear
wall.
2.2.2 6.1-channel
In this case (Figure 5), two of the surround speakers
should be placed in line with the centre of the
listening area and the third directly behind.
2.2.3 7.1-channel
Figure 6 shows the optimum positions if you have
four surround speakers.
Figure 1
2-channel
Figure 2
~0.5m
(20in)
~0.5m
(20in)
Figure 3
5.1-channel
6.1-channel 7.1-channel
Figure 4
Figure 5 Figure 6


Product specificaties

Merk: Bowers Wilkins
Categorie: Luidspreker
Model: M-1

Heb je hulp nodig?

Als je hulp nodig hebt met Bowers Wilkins M-1 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Luidspreker Bowers Wilkins

Handleiding Luidspreker

Nieuwste handleidingen voor Luidspreker