Bowers And Wilkins Panorama 3 Handleiding

Bowers And Wilkins Soundbar Panorama 3

Lees hieronder de 📖 handleiding in het Nederlandse voor Bowers And Wilkins Panorama 3 (6 pagina's) in de categorie Soundbar. Deze handleiding was nuttig voor 19 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/6

Panorama 3

ENGLISH

www.bowerswilkins.com

Welcome to Bowers & Wilkins and Panorama 3

When John Bowers rst established Bowers & Wilkins he did so in the belief that

imaginative design, innovative engineering and advanced technology were keys

that could unlock the enjoyment of audio in the home. That belief continues to

inspire every product we design.

Panorama 3 is a network-connected, wireless active speaker that provides

extremely high performance. Panorama 3 is primarily intended to be congured

and controlled using the Bowers & Wilkins Music App. The app is available for

both iOS and Android™ devices. Some commonly used control functions are

also available via touch buttons on the Panorama 3 rear panel. It is only possible

to install and congure a Panorama 3 using the Bowers & Wilkins Music App.

Panorama 3 will enable you to:

• Listen to audio from TVs via an HDMI® ARC/eARC connection.

• Listen to audio from TVs via a digital audio optical connection.

• Listen to audio from streaming services like Tidal, Qobuz, Deezer, Spotify®,

Apple Music and many others.

• Listen to audio over Bluetooth® from appropriately enabled Bluetooth

source devices.

• Listen to audio playing anywhere in your home on any compatible Bowers &

Wilkins wireless speaker connected to your home network.*

The Bowers & Wilkins Music App is required to connect your Panorama 3 to

your home network and establish connection with other products in your home.

The Bowers & Wilkins Music App also provides some control and conguration

functions during use. Before you begin your Panorama 3 installation, please

download and install the Bowers & Wilkins Music App on your iOS or Android

device. The Bowers & Wilkins Music App requires iOS 11.4 or later, or Android

V8.1 or later. Bluetooth and WiFi services must be enabled on your iOS or

Android device. You will also need to know your WiFi network password.

Note: Location Services must be enabled on Android devices during the setup

process. This is because compatible Bowers & Wilkins products use a low power

form of Bluetooth (BT-LE) for service communication, which on Android devices

is only enabled when Location Services are allowed. Bowers & Wilkins do not use

any location services data for marketing purposes.

* Feature to be enabled in 2022

ENGLISH

1. Carton Contents

Panorama 3

Power cable

HDMI cable

Wall bracket

Literature pack

2. Installing Your Panorama 3

Your Panorama 3 is designed to work with your TV

and therefore needs to be located close to your TV.

When connected to the TV, the Panorama 3 requires

both an HDMI connection and a mains power

supply to operate, so it must be located within reach

of a mains socket and HDMI connection. If your

Panorama 3 is to use a wired connection to your

home network, it will need to be located within reach

of an appropriate network (Ethernet) cable and use a

USB-C to Ethernet adaptor – see section 2.1.

Your Panorama 3 can be placed on a shelf, table

or furniture unit, or it can be wall-mounted on the

dedicated wall bracket which is included with the

Panorama 3. If you decide to place your Panorama

3 on a shelf, ensure that the shelf is easily able to

support the weight. The audio performance may be

diminished if mounting furniture or shelf panels are

imsy or resonant.

Note: If your Panorama 3 is to be mounted on a

wall bracket, be sure to install the bracket in line

with its included instructions. If you are unsure of

the suitability of a wall, or of your ability to install

the wall bracket, you should engage specialist

help.

Like the vast majority of speakers, your Panorama

3 radiates sound energy not only forward but

also to the top, side and rear. Consequently, if

your Panorama 3 is positioned close to room

boundaries, or particularly in a corner, bass may

become over-emphasised. If you nd that bass from

your Panorama 3 is too prominent, moving it to an

alternative position may be benecial, or you can

lower the bass level via the Bowers & Wilkins Music

App Settings menu.

2.1 Connections

In addition to a mains power socket, your Panorama

3 speaker also has an HDMI ARC/eARC connection,

optical audio connection and a USB-C connection

for service. It is possible to connect the Panorama 3

to a wired (Ethernet) connection with the use of an

Ethernet-to-USB-C adaptor (not supplied).

Note: Please connect your WiFi or wired LAN to

a commercially available router that is certied as

telecommunications terminal equipment.

The primary recommended connection to a TV is

with the HDMI connection, and we recommend

that you connect the Panorama 3 to your TV’s ARC

socket. If your TV does not have an ARC or eARC

enabled HDMI connection, then you can connect the

Panorama 3 to the TV with the optical digital audio

connection.

Note: To get the best functionality and

performance from your Panorama 3 with your TV,

we recommend that you enable ARC (and eARC

if available on your TV) and CEC. Every TV brand

will have a different way to enable these features,

and we recommend referring to your TV manual

for more information. We also recommend setting

the TV to pass-through or bypass mode to

enjoy the best audio performance from Dolby®

Atmos®-enabled content from other devices

connected to your TV.

2.2 Initial Connection

With all connections made, the Bowers & Wilkins

Music App installed on your mobile device and your

TV congured to work with the selected connection

method, your Panorama 3 is ready to be set up.

Your Panorama 3 has no mains power switch and

once connected to mains will run a short start-up

routine before being ready to use. The start-up

routine includes booting up the speaker, connecting

to the network and establishing a link to any

streaming services and, therefore, can take some

time to complete. During this time the Multifunction

button will ash white during boot up and orange

when establishing a network connection. An

audio prompt will play when the start-up routine is

complete.

When a Panorama 3 that has not been previously

used is rst switched on, it will automatically enter

setup mode to enable its connection to your home

network. Setup mode is indicated by a slow amber

pulse illumination of the Multifunction button (see

Diagram 1). The Panorama 3 will also appear in the

Bowers & Wilkins Music App as available for set-up,

either as a pop-up or after selecting ‘Add Product’

from the app settings page.

Your Panorama 3 manages its operational state

and power consumption entirely automatically and

will switch to a power saving mode after twenty

minutes of inactivity. There is no need to ever switch

off your Panorama 3; however, should you wish to

do so, simply disconnect it from mains power. Your

Panorama 3 will retain its settings without mains

power.

3. Restarting / Rebooting

You can restart a Panorama 3 speaker with a short

press and release of the Reset button located on its

rear panel (see Diagram 1). Pressing the button will

reboot the Panorama 3 off and on again. All settings

will be retained when your Panorama 3 restarts. You

can also restart your Panorama 3 via the Bowers &

Wilkins Music App settings page.

4. Factory Reset

If you wish to reset your Panorama 3 to its factory

default settings, press and hold the Reset button for

ve seconds. The Reset button location can be seen

in Diagram 1. The reset process will be indicated by

a red Multifunction button and an audio queue; this

process will shut down the Panorama 3. On restart,

your Panorama 3 will enter setup mode. All settings

will be deleted when your Panorama 3 resets. You

can also reset your Panorama 3 via the Bowers &

Wilkins Music App Settings menu.

5. Setting up on a Network

With your Panorama 3 in setup mode and with its

Multifunction button pulsing slowly amber, launch the

Bowers & Wilkins Music App on your iOS or Android

device. The app will guide you with prompts through

the setup process.

Note: Panorama 3 employs a Bluetooth

connection to the device running the Bowers

& Wilkins Music App during the setup process.

Bluetooth signals have a relatively short range

and can be interrupted by room boundaries,

so we recommend that your Panorama 3 and

Bowers & Wilkins Music App device remain close

to the product during the setup process.

The Bowers & Wilkins Music App requires you to

create a user account. When you rst download the

app, you will be asked to sign into your account if

you already have one or create an account. You will

need to input a username and password. You can

also modify the notications for your account before

setting up. Once you have created an account, you

will need to validate the email address by clicking the

link that will have been sent to your email address.

The Bowers & Wilkins Music App will rst search

for any products in setup mode and then will

automatically prompt you to start the setup process.

Alternatively, you can set up a new product from the

settings menu by selecting ‘Add product’ under the

‘Your devices’ section.

Diagram 1

Panorama 3 control panel and connectors

fgi kh j

Buttons / Connectors

Multifunction

Volume Up

Play/Pause

Volume Down

Voice Assistant

Reset

Digital Input

Service

Power

Ethernet

HDMI (ARC/eARC)

Product specificaties

Merk:	Bowers And Wilkins
Categorie:	Soundbar
Model:	Panorama 3

Heb je hulp nodig?

Als je hulp nodig hebt met Bowers And Wilkins Panorama 3 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Soundbar Bowers And Wilkins

Bowers And Wilkins Panorama 3 Handleiding

23 Januari 2023

Handleiding Soundbar

Nieuwste handleidingen voor Soundbar

Philips TAB5109 Handleiding

17 April 2024

LG S60TR Handleiding

17 April 2024

LG S40T Handleiding

17 April 2024

Samsung HW-Q910D Handleiding

16 April 2024

Samsung HW-Q930D Handleiding

16 April 2024

Samsung HW-LS60D Handleiding

16 April 2024

Philips HTL7140B Handleiding

12 April 2024

Grundig GSB 900 Handleiding

11 April 2024

Samsung HW-S61D Handleiding

10 April 2024

Elac Muro SB41L Handleiding

8 April 2024