Bowers And Wilkins 706 S3 Handleiding
Bowers And Wilkins
Speaker
706 S3
Bekijk gratis de handleiding van Bowers And Wilkins 706 S3 (8 pagina’s), behorend tot de categorie Speaker. Deze gids werd als nuttig beoordeeld door 70 mensen en kreeg gemiddeld 4.9 sterren uit 35.5 reviews. Heb je een vraag over Bowers And Wilkins 706 S3 of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/8
Manual
700 Series 3
bowerswilkins.com
Welcome and thank you for choosing Bowers & Wilkins.
Our founder, John Bowers, believed that imaginative design,
innovative engineering and advanced technology were keys that
could unlock the enjoyment of audio in the home. His belief is one
that we continue to share and inspires every product we design.
This is a high performance product that rewards thoughtful
installation, so we suggest that you take some time to read this
manual before you begin. Continue on page 3
5
ENGLISH
705 S3 / 706 S3 / 707 S3
The 705 S3, 706 S3 and 707 S3 are primarily designed to be
mounted on a dedicated oor stand (FS-700 S3), but may be
placed on a shelf if preferred. However, it should be noted that
this offers less exibility to optimise the speaker’s performance.
If shelf placement must be used, we recommend using the foam
plugs (supplied) to optimise port performance (see Section 4:
Fine-Tuning).
In both installation cases, the speakers’ tweeters should be
approximately at ear height at your usual listening position.
Note: If using a shelf, ensure that it is strong enough to
properly support the weight and fit the four self-adhesive
rubber feet to the underside of the speaker.
Important Safety Notice
Sharp spikes, do not touch.
The spike feet are designed to pierce carpet and rest on the
oor surface. Initially, screw the lock nuts onto the spikes just
far enough to leave the nuts oating just above the carpet when
the spikes are resting on the oor beneath. Then, screw the
spikes fully into the threaded inserts in the plinth. If the cabinet
rocks when placed on the oor, unscrew the two spikes that do
not touch the oor until the cabinet rests rmly without rocking.
Finally, lock the nuts against the base by using the supplied
spanner to gently tighten the nut whilst using the supplied tommy
bar to stop the spike foot rotating. It may be more convenient to
t and adjust the spike feet after speaker positioning has been
optimised.
If there is no carpet and you wish to avoid scratching the oor
surface, use either a protective metal disc (a coin perhaps)
between the spike and the oor, or use the supplied rubber feet.
Fit the rubber feet and level the cabinet in the same manner as
with the spike feet.
<15mm
<29mm
<30mm
<31mm
702 S3 703 S3 / 704 S3
Product specificaties
| Merk: | Bowers And Wilkins |
| Categorie: | Speaker |
| Model: | 706 S3 |
Heb je hulp nodig?
Als je hulp nodig hebt met Bowers And Wilkins 706 S3 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Speaker Bowers And Wilkins
8 April 2024
1 December 2023
1 December 2023
1 December 2023
9 Juli 2023
7 Juli 2023
6 Juli 2023
2 Juni 2023
1 Juni 2023
29 Mei 2023
Handleiding Speaker
- NEAR
- Audiosonic
- Triangle
- Gear4
- EGO
- Technisat
- Skytec
- Luxor
- Nest
- Dreamgear
- Karcher Audio
- Urban Revolt
- Escape
- Astell&Kern
- Hercules
Nieuwste handleidingen voor Speaker
3 Augustus 2025
3 Augustus 2025
3 Augustus 2025
2 Augustus 2025
2 Augustus 2025
2 Augustus 2025
2 Augustus 2025
2 Augustus 2025
1 Augustus 2025
1 Augustus 2025