Bower SFD728 Handleiding

Bekijk gratis de handleiding van Bower SFD728 (1 pagina’s), behorend tot de categorie Flitser. Deze gids werd als nuttig beoordeeld door 3 mensen en kreeg gemiddeld 4.4 sterren uit 9 reviews. Heb je een vraag over Bower SFD728 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

NOMENCLATURE

FLASH FEATURES

•Guide No: 28m/92ft (ISO100@50mm)

•Flash ready indicator in viewfinder

•Full Digital TTL dedication

• -Red Assistance beam AutofocusInfra

•Zoom, bounce and swivel construction

•Automatic shuer speed seing tttt

• Autocheck(OK)indicator

•Red eye reduction*

•Second/Rear curtain synchronization*

•Slow synchronization (For Nikon only)

•Dedication: L I / II (Canon), iTTL (Nikon) ETT

* me dependeneaesease chek ouame opeCarat ftur. Plcyr crarating

irioml nstuctn anua

PLEASE READ BEFORE YOU USE THE FLASH

IMTANT T APORNOESFORFLSHPHOOGR TAP HY

A MANDINTAINANCE

1. For be flash photography resul set your to stts,ISO

200 and above in both indoor and outdoor.

2. wa for at lea 4-5 seconds for the Aftereachpicture,itst

flash to be fully charged before taking the next shot

even though the ready light is on. This w

ill help to

prolong the lifespan of the flash tube as well as to

attain the full charging capacity of t flash capacitor he

for precise flash photography.

3. For precise flash outpu wa t,itisbesttoittillan

intermittent humming sound is heard before

depressing the shuer. tt

4. Maintain at least 2m away y fromoursubject.

5. ways zoom head position according to Alsettheflash

the zoom position of your camera lens.

6. In the event that the flash exposure is incorrect (over

or under exposed or green auto checklightdoesnotlit

up), you may take either one or more of the corrective

aion: (1) move closer to the subject (2) Re-adjust ct

your bounce/swivel angle (3) Adjust flash zoom head

(4)IncreaseISOsetting.

7. Bounce or swivel should only be used on lighter colour

ceiling or white walls with zoom head set at the 50mm

position. Note that w

hen using this feature, 2-3 op f/st

oflightillbelostduetoreflection. w

8. Always use a fresh set of 4 batteries of the same

brand and type when old batteries are depleted. Mix

and match batteries of di ty w fferentpes/brandsill

greatly deteriorate flash performance.

9. When flash is not being used for extended period of

time (>2 weeks), remove all batteries to prevent

battery leakage. After batteries removal, do not

expose the flash unit and baeries to excessive heat tt

suchasireorsun f .

10. Charge up and test fire the flash unit at lea once per st

month to maintain the optimal performance of the

flash tube and charging capacito r.

BATTERIES INSTALLATION

Ensure that the ON/OFF is in the OFF position. Insert 4

new AA size batteries according to the battery polarity

indicated inside the battery chamber.

MOUNTING THE FLASH ON THE CAMERA

Ensure that the On switch OFF position. /OFFisatthe

Slide the flash hotshoe base onto the camera’s

hot shoe

contactandfastenthelock ring in an anti-clockwise

motion. Slide the ON/OFF Switch to the ON position.

When the Ready Light lights up, the flash is ready to fire.

PressingtheTestButtonilltestfiretheunit. w

AUTO E LIGHT CHCK

The Green Auto Check Light located on the back of the

flash is used to confirm that your subj wi ectisthinthe

effective TTL range of the fl y ashunit.Ifoursubjectis

within the eective L flash range after shooting, the ffTT

green Auto Check Light will illuminate for approximate 2

seconds

PROGRAM TTL (P) / AUTO MODE

This flash unit provides automatic Through-The-Lens

(TTL) control of the flash exposure when used with

dedicated digital cameras. When using this mode, the

flash unit will automatically emit the flash output for a

balance illumination of the subject and background. The

inbuilt AF infra-red assistance beam will turn on

automaticalltoassistthey camera to focus in low lighting

conditions.

TTL AV, TV AND M MODE

When this flash unit is used

in AV, TV or M mode, the

flash exposure will be automatically controlled by the

camera based on the combination of shutter speed and

aperture value.

*For TV m e maximum camers flash synchrz ode,donotxceedthea’oniation

s m se a slow s w usy resu r ctures peed.InAVode,ttingatpeedilluallltinblupi

caused by handsk such si use of tr is reco.hae.Intuation,theipodmmended

SECOND/REAR CURTAIN SYNCHRONIZATION

This mode permits you to release the flash just before the

shuer closes during slow shuer speed shooting. In this tttt

way, a trail of lighting can be taken behind the main

subjecthensloshutt w w er speed is being used.

*For rr curt synchrzat se, refer to yr camera struct m. eaainoniionttingouinionanual

RED EYE REDUCTION

When red eye reduction is activated on the DSLR body,

theflashunitillactite w va a series of preflash before the

main flash to reduce the possibility of red-eye occurrence

during digital photography.

US HEAD INGZOOM

For proper angle coverage, set the flash zoom head

position according to the zoom position of the camera

lens.

USING BOUNCE AND SWIVEL HEAD

Various combination of bounce and swivel angle can be

usedtocutoffunantedshadoorforspecialsofteffect w w

purposes.

CAMERA COMPATIBILITY CHART:

Ty Ml peode

Canon

(AFC)

Powershot Models:

G1, G2, G3, G5, G6, G7, G9,G10, S5 IS, Pro 1

EOS Models:

5D, 5D MKII, 20D, 30D, 40D, 50D, 300D, 350D

400D, 450D, 1000D

Nikon

(AFN)

Coolpix 8400, 8800

D40, D40x, D50, D70, D70s, D80, D200, D2xs

D2Hs, D2x, D2H

READY LIGHT

SWIVELPIVOT

ON/OFFSWITCH

AUTO FOCUS TTL

DIGITAL DEDICATED FLASH

4 POSITION

ZOOM SHROUD

BARYTTE

COMPARTMENT

BOUNCE ANGLE

SCALE

AUTO CHECK

LIGHT

TEST TTOBUN

FLASH HEAD

BOUNCE HEAD

BASE

AIUMINATOR F LL

SPECIFICATIONS:

Guide Number: 28m / 92ft (ISO 100@50mm)

Circuitry: and series circuitry IGBT

HOTSHOE BASE

LOCK RING

Automatic TTL Range: 14m / 46 2.0) ft(F

AFft Illumination: 8m / 26

Dedication:

- For Canon E-TTL/E-TTL II

- k ForNioniTTL

Exposure check: Green Auto Check Light

Color Temperature: Daylight 5600K

Zoom Head Position: 28mm to 85mm (35mm equiv)

Bounce Adjustment: 0 ~ 90°

Horizontal Swivel: 0 ~ 330°

Flash Duration: 1/700 sec. (Full power)

Recyc Time: 0.5 ~7 . lingsec

Number of flashes: 100 – 300 per set of new baeries tt

Power Source: 4 AA Batteries

(Alkaline, NiCd or NiMH)

Dimension (mm): 168 48 76 ××

Weigh 221 grams (w/o baeries) t:tt

Pri in Singre(- R ) ntedapo PK652812EV0211/05/07

D rid iri of w digil r veuetotheapntoductonnetacameas,theabo

comtty may t t to cate t resive wpaibililistnobeupdaedindihepectne

m me of g. ve fl odelsatthetiprintinNertheless,theashunitisstill

comtible with w camera pane

mls tt utilize t latest digitalodehahe

dedicaiont system.

DIRECT FLASHINDIRECT FLASH

Downloaded from manuals search enginewww.Manualslib.com

Product specificaties