Boss Mini Rearview CAM22 Handleiding

Boss Bewakingscamera Mini Rearview CAM22

Lees hieronder de 📖 handleiding in het Nederlandse voor Boss Mini Rearview CAM22 (2 pagina's) in de categorie Bewakingscamera. Deze handleiding was nuttig voor 21 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2

Specifications

The above parameters can ba modified without separate notification

Images sensors: PC1030 MT9V136 PC3030

Power upply: DC9V - 15V

Lens Angle(Deg.): 170

TV System: PAL/NTSC

Video Output: 1.0vp-p,75ohm

S/N Ratio: 48dB

IP rating: IP68

Operating -30 ~ +70 RH95%MAX.

White Balance: Auto

Minimum illumination: 0.5Lux

AGC: Auto

Electronic shutter 1/60(NTSC) 1/50(PAL)

Effective pixels: 656*492

Resolution(TV Lines): 420 480

1/10,000second

Temperature(Deg.C):

User Manual

Mini Rear-view

Flush Mount Camera

Model : CAM22

Thank you for choosing Boss Audio.

DO NOT FULLY RELY ON THE REVERSE

CAMERA WHEN BACKING UP, know your

surroundings before backing.

142*100mm

Simple Troubleshooting Guide

Image Blurring

Please check if there is water stain or dust on

the camera.

Image Shaking Please adjust and fix-up

No Image.

Please check if the power cable is well connected.

Note:

If any of the problems persist after check list had been made, consult your nearest

service dealer. Never attempt to disassemble your unit by yourself.

The following checklist might help to solve the problems which you meet when using

the unit. Please double check and make sure if the connection and the procedure of

the operation is done properly before using the checklist .below

Problem Cause/Solution

Image Slanting Please adjust the bracket of camera

Please make sure good connection between the

video in and the monitor.

Please check if reverse gear is in place.

Please make sure correct setup of monitor.

Please make sure cleaness of the camera lens.

Red and black back lights 12V Line

DC 12V

Power / video

Camera

Complete all of the required connections in the way that make all the lines

hided in the car.

Installation

1. Wire connection

2. Installation

The camera can be installed in the f ollowing way:

Flush-mount (see diagram 1)

Flush-mount: Install by drilling a hole on the rear bumper.

Attention: The camera switch is controlled by the reverse gear shift.

Car body

(diagram 1)

Product specificaties

Merk:	Boss
Categorie:	Bewakingscamera
Model:	Mini Rearview CAM22
Kleur van het product:	Zwart
Materiaal behuizing:	Kunststof
USB-poort:	Nee
Ondersteuning voor plaatsing:	Buiten
Connectiviteitstechnologie:	Bedraad
Ethernet LAN:	Nee
Maximum resolutie:	656 x 492 Pixels
Totaal aantal megapixels:	0.3 MP
Stroomuitvoer (volt):	+12V
Minimale belichting:	0.5 Lux
Field of view (FOV) hoek:	170 °
Geïntegreerde geheugenkaartlezer:	Nee
Ingebouwde HDD:	Nee
Nachtvisie:	Nee
Microfoon, line-in ingang:	Nee
Aansluiting voor netstroomadapter:	Ja
Optische zoom:	0 x
Ingebouwde microfoon:	Nee
Opbergetui:	Nee
Veiligheidsfunties:	Waterbestendig
Power LED:	Nee
Composiet video-uitgang:	1
Signaal/ruis-verhouding:	48 dB
Power over Ethernet (PoE):	Nee
PTZ control:	Nee
Aantal TV lijnen:	420
Dag/nacht modus:	Nee
Afstandsbediening inbegrepen:	Nee
Wifi:	Nee
Bedrijfstemperatuur (T-T):	-30 - 70 °C
Relatieve vochtigheid in bedrijf (V-V):	0 - 95 procent
Auto-tracking:	Nee
NTSC resoluties:	420 Pixels
PAL resoluties:	480 Pixels