Boss BLAST Handleiding

Boss Speaker BLAST

Lees hieronder de 📖 handleiding in het Nederlandse voor Boss BLAST (1 pagina's) in de categorie Speaker. Deze handleiding was nuttig voor 51 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/1
The LED Light flashes when the battery
level is low and you will hear a Battery
low level tone.
When charging your speaker, the red
LED light will stay on, the LED will shut
o when the device is fully charged.
M
M
BOSS Audio Systems
Press M to cycle thru modes,Long press to
disconnect a paired BT device.
The modes available are USB,SD Card,Blue-
tooth,Aux and FM.
You can connect two BOSS Audio Systems
with each other to enrich your listening experience.
1 Hold on one speaker for 3 seconds to set
up True Wireless connection (main speaker),
making sure the other speaker (to be
purchased separately) is not connected to any
Bluetooth device.
2 The two speakers will pair with each other
automatically after 15 to 30 seconds.
3 Once paired, the True Wireless will reconnect
automatically when both speakers are turned
on again.
Tips: After a successful connection, you can
use the , and+/- keys on either speaker
to control both speakers at the same time.
You can hold on either speaker for
3 seconds to disconnect True Wireless
connection.
You can only pair and connect your mobile
device with the main speaker.
Puede conectar dos altavoces Boss Audio Systems Blasts
entre sí para enriquecer su experiencia auditiva.
1 Presione en un altavoz durante 3 segundos
(altavoz principal), asegurándose de que el
otro altavoz (que debe comprar por separado)
no esté conectado a ningún dispositivo
Bluetooth.
2
Los dos altavoces se emparejarán
automáticamente después de 15 a 30 segundos.
3 Una vez emparejados, la conexión True Wireless
se volverá a conectar automáticamente
cuando ambos altavoces se enciendan
nuevamente.
Consejos: Después de realizar la conexión
con éxito, puede usar las teclas , y +/- de
cualquiera de los altavoces para controlar
ambos altavoces al mismo tiempo.
Puede presionar en cualquiera de
los altavoces durante 3 segundos para
desconectar la conexión True Wireless.
Solamente p rá vincular y conectar su od
dispositivo móvil con el altavoz principal.
turn solid
( )not included
Bluetooth connection successful
2.0A
Charging
LED
The
To perform an auto-scan,press the button.
The Blast will go into auto-scan mode and store all
radio stations with a strong enough signal.
unit
change
+/- buttons.
Long press+/- to adjust volume.
Short press+/- to skip to the previous or next song.
Short press to pause or resume music play.
3 Sec.
3 Sec.
3 Sec.
M
Charging
LED
USB
Micro SD
AUX Input
Reciclaje
de envase
Boss Audio Systems Blast
La luz LED parpadea cuando el voltaje
de la batería está por debajo de 6,5V,
y escuchará el tono "Batería baja".
Cuando el voltaje es inferior a 5,9 V, la
unidad se apagará automáticamente.
8.3±0.1V
Mantenga presionado para encender o apagar.
Mantenga presionado para encender la luz RGB.
pulsado TUBE entra en modo
almacenadas, pulse el botón +/-
dispositivos disponibles para iniciar
What's Included
Power
Bluetooth
AUX IN
Modes
FM
True WIrelesss Stereo (TWS)
Charging Your Speaker
13.9*5.4*7.2 inch
13.9*5.4*7.2 inch


Product specificaties

Merk: Boss
Categorie: Speaker
Model: BLAST

Heb je hulp nodig?

Als je hulp nodig hebt met Boss BLAST stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Speaker Boss

Handleiding Speaker

Nieuwste handleidingen voor Speaker