Boss BCB-90X Handleiding

Boss Receiver BCB-90X

Lees hieronder de 📖 handleiding in het Nederlandse voor Boss BCB-90X (1 pagina's) in de categorie Receiver. Deze handleiding was nuttig voor 20 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/1

* 5100074666- 01*

English

Owner’s Manual

BCB-90X Pedal Board Before using this unit, carefully read “USING THE UNIT SAFELY” and “IMPORTANT NOTES” (the leaet “Read Me First” and the

Owner’s Manual). After reading, keep the document(s) where it will be available for immediate reference.

WARNING

Use only the supplied AC adaptor and

the correct voltage

Be sure to use only the AC

adaptor supplied with the unit.

Also, make sure the line voltage

at the installation matches

the input voltage specied on the AC

adaptor’s body. Other AC adaptors may

use a dierent polarity, or be designed

for a dierent voltage, so their use could

result in damage, malfunction, or electric

shock.

Connect only specied devices to DC

OUT jack

Connect only the specied

device (the specied devices

described in “Making

Connections” of this document)

to the DC OUT jack (which provide a

supply of power).

Use only the supplied power cord

Use only the attached power

cord. Also, the supplied power

cord must not be used with any

other device.

CAUTION

Take care so as not to get ngers

pinched

When handling the following

moving parts, take care so as not

to get ngers, toes, etc., pinched.

Whenever a child uses the unit, an adult

should be on hand to provide supervision

and guidance.

• Lid

• If you use a knife to cut the holding

pad, take care not to injure yourself.

• When cutting the cutouts, take care

not to damage nearby equipment with

the knife.

Eect Unit Installation Examples

By cutting the included holding pad to match the shape of the products that you want to install, you can hide the cabling and create a clean layout.

Example 1 Example 3 Example 2

USING THE UNIT SAFELY

Used for instructions intended to alert the

user to the risk of injury or material

damage should the unit be used

improperly.

* Material damage refers to damage or

other adverse effects caused with

respect to the home and all its

furnishings, as well to domestic animals

or pets.

Used for instructions intended to alert the

user to the risk of death or severe injury

should the unit be used improperly.

The symbol alerts the user to things that must be

carried out. The specific thing that must be done is

indicated by the design contained within the circle. In the

case of the symbol at left, it means that the power-cord

plug must be unplugged from the outlet.

The symbol alerts the user to important instructions or

warnings.The specific meaning of the symbol is

determined by the design contained within the triangle. In

the case of the symbol at left, it is used for general

cautions, warnings, or alerts to danger.

The symbol alerts the user to items that must never be

carried out (are forbidden). The specific thing that must

not be done is indicated by the design contained within

the circle. In the case of the symbol at left, it means that

the unit must never be disassembled.

About WARNING and CAUTION Notices About the Symbols

ALWAYS OBSERVE THE FOLLOWING

IMPORTANT NOTES

Power Supply

• Place the AC adaptor so the side with

the indicator faces upwards. The

indicator will light when you plug the

AC adaptor into an AC outlet.

Placement

• Depending on the material and

temperature of the surface on which

you place the unit, its rubber feet may

discolor or mar the surface.

Additional Precautions

• When disposing of the packing carton

or cushioning material in which this

unit was packed, you must observe the

waste disposal regulations that apply to

your locality.

• Do not use connection cables that

contain a built-in resistor.

• When opening/closing the lid, please be

careful not to get your ngers pinched

between the movable part and the

unit. In places where small children

are present, make sure that an adult

provides supervision and guidance.

Intellectual Property Right

• Roland, BOSS are either registered

trademarks or trademarks of Roland

Corporation in the United States and/or

other countries.

• Company names and product names

appearing in this document are

registered trademarks or trademarks of

their respective owners.

Do It Yourself 1 (Cutting the Holding Pad)

When installing stompboxes, you can save layout time by using the existing pre-cuts in the holding pad to remove unneeded

portions.

The cutouts at the left and right of the holding pad indicate the positions that are above the cable guides (places to conceal

long cables) when it is placed in the case. Use these cutouts when deciding where to position your eect units, and cut the

holding pad so that cables can be accommodated neatly when the eect units are installed.

* If you use a knife to cut the holding pad, take care not to injure yourself.

* When cutting the cutouts, take care not to damage nearby equipment with the knife.

Cable guide

Holding pad

cutouts

Do It Yourself 2 (Keeping the Cables Neat)

If the power supply parallel cable and long patch cables are aligned with the cable guide, the cables can be managed neatly.

Cable guide

MEMO

To detach the lid, lift it to the position shown in the illustration, and then press in the direction of the arrow.

Making Connections

* To prevent malfunction and equipment failure, always turn down the volume, and turn o all the units before making any connections.

* The PSB-1U adaptor can supply 2,000 mA of current. Before you make connections, verify that the total current consumption of all eect

units does not exceed this value.

* After you have made connections correctly, you must observe the following procedure when turning on the power Malfunctions or speaker

damage might occur if you fail to observe the correct order.

Main Specications

Connectors

INPUT Jack (1/4” phone type)

SEND Jack (1/4” phone type)

RETURN A/B Jack (1/4” phone type)

OUTPUT A/B Jack (1/4” phone type)

DC IN/OUT Jack

Power Supply DC 9V: AC adaptor

Dimensions 661 (W) x 383 (D) x 113 (H) mm

26-1/16 (W) x 15-1/8 (D) x 4-1/2 (H) inches

Inside

dimensions

72 (H) mm

2-7/8 (H) inches

Weight 3.3 kg

7 lbs 5 oz

Accessories

AC adaptor (PSB-1U + AC Cable Set)

10-pin parallel DC cable x 1

Pre-cut insert pad (thickness: 10 mm) x 1

Owner’s Manual

Leaet “USING THE UNIT SAFELY”

Option

(sold separately)

AC adaptor (PSB-1U)

Pre-cut insert pad (thickness: 10 mm)

* This document explains the specications of the product at the time that the document was issued. For the latest information, refer to the

Roland website.

* When purchasing an AC adaptor, be sure to specify the adaptor (from the list that follows) that is designed for the region in which it will be

used, and the voltage supplied there. (PSB-120/PSB-120TW/PSB-230EU/PSB-230UK/PSB-240A)(sets containing PSB-1U and power cord)

When turning the power on: Power-on the amp last.

When turning the power o: Power-o the amp rst..

For the USA

SUPPLIER’S DECLARATION OF CONFORMITY

Compliance Information Statement

Model Name :

Type of Equipment :

Responsible Party :

Address :

Telephone :

BCB-90X

CARRYING BOX

Roland Corporation U.S.

5100 S. Eastern Avenue Los Angeles, CA 90040-2938

(323) 890-3700

IMPORTANT: THE WIRES IN THIS MAINS LEAD ARE COLOURED IN ACCORDANCE WITH THE FOLLOWING CODE.

BLUE:

BROWN:

As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings identifying

the terminals in your plug, proceed as follows:

The wire which is coloured BLUE must be connected to the terminal which is marked with the letter N or coloured BLACK.

The wire which is coloured BROWN must be connected to the terminal which is marked with the letter L or coloured RED.

Under no circumstances must either of the above wires be connected to the earth terminal of a three pin plug.

NEUTRAL

LIVE

For the U.K.

For details on the BCB-90X, refer to the BOSS website.

https://www.boss.info/global/

products/bcb-90x/

For BOSS cables, refer to the BOSS website (Accessories).

https://www.boss.info/global/

categories/accessories/boss_

cables/

Product specificaties

Merk:	Boss
Categorie:	Receiver
Model:	BCB-90X
Kleur van het product:	Zwart
Ingebouwd display:	Nee
Gewicht:	3300 g
Breedte:	661 mm
Diepte:	383 mm
Hoogte:	113 mm
Gebruikershandleiding:	Ja
Type stroombron:	AC
Inclusief AC-adapter:	Ja
Pedaal-aansluiting:	Ja
Aansluiting voor netstroomadapter:	Ja
Merkcompatibiliteit:	Boss
Gebruiksvriendelijk:	Ja
Type product:	Opbergtas
Uitgang van 6,35 mm (1/4-inch):	2
Ingang van 6,35 mm (1/4-inch):	2