Boss ATV85B Handleiding

Boss Speaker ATV85B

Lees hieronder de 📖 handleiding in het Nederlandse voor Boss ATV85B (3 pagina's) in de categorie Speaker. Deze handleiding was nuttig voor 77 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/3

ATV85B-UM-POSTER-STYLE-FINAL-v1.0.indd 1 2/25/2015 2:45:06 AM

FCC COMPLIANCE STATEMENT

This device complies with part 15 of the FCC Rules. Operation is subject to the

following two conditions:

(1) this device may not cause interference, and

(2) this device must accept any interference, including interference that may cause

undesired operation of this device.

This transmitter must not be co-located or operated in conjunction with any other

antenna or transmitter. The Bluetooth antenna cannot be removed (or replaced) by

user. This equipment complies with FCC/ IC radiation exposure limits set forth for

an uncontrolled environment and meets the FCC radio frequency (RF) Exposure

Guidelines and RSS-102 of the IC radio frequency (RF) Exposure rules. This

equipment has very low levels of RF energy that it deemed to comply without

maximum permissive exposure evaluation (MPE). But it is desirable that it should

be installed and operated keeping the radiator at least 20 cm or more away from

person’s body (excluding extremities: hands, wrists, feet and ankles). Alteration

or modications carried out without appropriate authorization may invalidate the

user’s right to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a

Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are de-

signed to provide reasonable protection against harmful interference in a residen-

tial installation. This equipment generates, uses and can radiate radio frequency

energy and, if not installed and used in accordance with the instructions, may

cause harmful interference to radio communications. However, there is no guar-

antee that interference will not occur in a particular installation. If this equipment

does cause harmful interference to radio or television reception, which can be

determined by turning the equipment off and on, the user is encouraged to try to

correct the interference by one or more of the following measures:

□ Relocate or reorient the receiving antenna.

□ Increase the separation between the equipment and receiver.

□ Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

□ Consult the dealer or an experienced radio/TV technician for help.

THIS PACKAGE CONTAINS

1- ATV85B All Terrain Speaker System

1- Bluetooth Multi-Function Controller

1- Handlebar Mounting Kit

1- Quick Connect Power Extension Adaptor

2- Nylon Mounting Straps and Nylon Zip Ties

1- User Manual Quick Start Guide / Poster

1- Warranty Card

USER MANUAL

QUICK START GUIDE

Thank you for purchasing this

ATV85B All Terrain Sound System

Please read through these instructions carefully so you will know how to

operate your model properly.

After you have nished reading the instructions, keep this document in a

safe place for future reference.

INFORMATION TO THE USER

The Bluetooth® word mark and logos are registered trademarks owned by

Bluetooth SIG, Inc. and any use of such marks is under license.

Other trademarks and trade names are those of their respective owners.

CAUTION!!

ADJUSTMENT OR ALTERATIONS OF THIS DEVICE MAY RESULT

IN HAZARDOUS RADIATION EXPOSURE.

GETTING TO KNOW YOUR

ATV85B MULTIFUNCTION CONTROLLER (MFC)

BEFORE YOU START

IMPORTANT SAFETY PRECAUTIONS

■ Do not operate mobile equipment while driving a motorized vehicle – safe driving and

safety consideration of others should always be your highest priority.

■ In the event you should notice smoke, strange noises or odor from this product, or any

other abnormal signs, immediately turn off the power and consult your dealer or the nearest

authorized BOSS AUDIO Service Center. Using this product in this condition may result in

permanent damage to the system.

■ Set your volume control at a low setting, then slowly increase the sound until you can

hear it comfortably without distortion, or ear discomfort.

■ BE SURE TO OBSERVE THE FOLLOWING GUIDELINES:

- Do not turn up the volume so high that you can’t hear what’s around you.

- Use caution or temporarily discontinue use in potentially hazardous situations.

INSTALLATION PRECAUTIONS

WARNING - Always consult a professional installer

■ Do not attempt to install or service this product by yourself. Installation or servicing of this

product by persons without professional training and experience in electronic equipment

and motorized vehicle accessories may be dangerous and could expose you to the risk of

electric shock, injury or other hazards

■ Refer any repairs to a qualied BOSS AUDIO SYSTEMS Service Center

■ The ATV85B can be powered from a vehicles cigarette lighter / auxiliary power port, or

hard wired directly to the battery through an optional relay / accessory switch

■ When wiring directly to the vehicles battery, be sure to disconnect the batteries negative

terminal wire before starting any wiring procedures, it is suggested that an

optional fuse and fuse holder (not included) with minimum rating of be in line with 20 Amps

the positive battery terminal

■ The ground cable length should not exceed 18-inches (See wiring diagram)

■ The ATV85B has a weather resistant design, it should not be submerged in or

under water under any circumstances

■ Use only the installation parts provided with the ATV85B

GETTING STARTED

567

MFC - MULTIFUNCTION CONTROLLER

BLUETOOTH INDICATOR LED - BLUE COLOR

POWER INDICATOR LED - RED COLOR

3.5mm AUX-INPUT

PREVIOUS TRACK / Press and hold for VOL -

PLAY/PAUSE / Press and hold for POWER ON

NEXT TRACK / Press and hold for VOL +

CAUTION!! Using other mounting methods may void this warranty

PAIRING & DISCOVERING A NEW BLUETOOTH CONNECTION

1) Power on the ATV85B Play/Pauseby pressing and holding down the multifunction

button for 3 seconds, the 2blue and 3red LEDs will start to alternately ash, signalling

that the ATV85B is now ready for Bluetooth pairing.

NOTE: You have 2 minutes before you must restart this procedure over again.

2) Now that the ATV85B is in pairing mode:

ANDROID users:

a. Go into the of your deviceSettings Menu

b. Enter the Bluetooth Menu

TURN ON Bluetooth SCANc. and press

d. “ATV85B” AVAILABLE DEVICESwill now be displayed under

e. If prompted, enter passcode: “ ”0000

iOS users:

a. Go into the of your deviceSettings Menu iOS

b. Enter the Bluetooth Menu

. TURN ON Bluetoothc

d. “ATV85B” will now be displayed

e. If prompted, enter passcode: “ ”0000

3) If the ATV85B Device List”is not seen, repeat the above steps to refresh the “

4) When the connection is successful, you are now ready to stream music from your favorite

media player to the ATV85B

To avoid battery exhaustion, be sure to occasionally run the

vehicles engine while using this product.

Using this product without running the engine can drain the battery.

BLUETOOTH OPERATION BLUETOOTH / NFC OPERATION

RECONNECTION

1) Power on the ATV85B and your last paired device Bluetooth.

2) The unit will now automatically reconnect

3) If your device was previously paired with the ATV85B, but it wasn’t the last paired

device:

a. Ensure no other devices are currently paired

b. Enter the on your device being pairedBluetooth Menu

c. “ATV85B” AVAILABLE DEVICES will display under

d. Choose the “ATV85B” to reconnect

4) If the device is out of range from the ATV85B, it will disconnect automatically:

a. To reconnect once device is back in range, press the Play/Pause

button once

b. The ATV85B will now reconnect to the device

Tips:

MULTIFUNCTION CONTROLLER BLUETOOTH OPERATION

1) Press the PLAY/PAUSE PLAYonce to start playing music or press the button from

your device touch screen

2) To skip songs or advance, press the buttonNEXT TRACK

3) To select the previous song, press the buttonPREVIOUS TRACK

VOLUME CONTROL

4) To raise the volume the button 2 ~ 3 secondsPress and Hold VOL +

5) To lower the volume the Press and Hold button 2 ~ 3 secondsVOL -

MULTIFUNCTION CONTROLLER AUX-IN OPERATION

1) Power on the ATV85B PLAY/PAUSE by pressing and holding down the multifunc-

tion button for 3 seconds

2) Disconnect any paired Bluetooth Bluetooth device by turning off in your devices

Settings Menu

3) Connect the integrated 3.5mm cable located on right side of the MFC to your AUX-IN

devices headphone jack

4) Route the wire back to ATV85B, strap and secure your device in the supplied soft carry

pouch

VOLUME CONTROL

5) To raise the volume the button 2 ~ 3 secondsPress and Hold VOL +

6) To lower the volume the Press and Hold button 2 ~ 3 secondsVOL -

STREAMING MUSIC

Make sure your device Bluetooth volume is set at 75% level

before stowing in to the carry pouch

AUX-INPUT

Make sure your device headphone volume is set at 75% level

before stowing in to the carry pouch

ATV85B can play audio from any device

that has a 3.5mm headphone audio jack.

YOUR DEVICE

Tips: Tips:

MULTI-FUNCTION CONTROLLER MOUNTING

LEFT or RIGHT

FOR ILLUSTRATION PURPOSES

YOUR VEHICLE MAY VARY

FOR ILLUSTRATION PURPOSES

YOUR VEHICLE MAY VARY

RUBBER

SHIM

INSERT

WASHER

LOCK NUT

ALLEN HEAD

BOLT

LOCK NUT

ALLEN HEAD

BOLT

MULTI-FUNCTION

CONTROLLER

UNIT

SNAP

BRACKET

Z-BRACKET

HANDLEBAR

CLAMP

TOOLS NEEDED:

- 12mm Socket, Wrench or Pliers

- 6mm Allen Wrench

BEFORE INSTALLING THIS PRODUCT

When replacing the fuse, be sure to only use a fuse of the rating specied on

this product. To avoid short-circuiting, cover any disconnected leads with insulating

tape. It is especially important to insulate any unused wires, which if left uncovered

may cause a short circuit. When connecting other devices to this product, refer to

the manual for the product to be connected. The black cable is ground, make sure

to connect the ground wire rst. Ensure that the ground wire is properly connected

to metal parts of the vehicles body frame or direct to the battery if your vehicle

does not have a grounded chassis frame The ground wire of this units power amp

and a second powered system must be connected to the frame separately with

different screws. If the screw for the ground wire loosens or falls out, it could result

in re or malfunction.

To avoid potential shorts in the electrical

system, be sure to disconnect the (–) bat-

tery cable before installation. Use this unit

with a 12-Volt battery and negative ground-

ing only. Failure to do so may result in a

re or malfunction.

SPEAKER MOUNTING SUGGESTIONS

CAUTION!! Mounting straps should be

double checked to be sure they are tight

and secure before each use of the

vehicle. The carry pouch is designed to

keep your device safe from debris, make

sure to close the pouch cover securely

before using vehicle.

BLUETOOTH® ENABLED

ALL-TERRAIN SOUND SYSTEM

ATV85B

USER MANUAL

FEATURING 8” MARINE GRADE SPEAKERS

AND 1” SOFT DOME TWEETERS

with BUILT-IN HIGH POWERED INTERNAL AMPLIFIER

QUICK START GUIDE

ATV85B

USER MANUAL

BLUETOOTH® ENABLED | ALL-TERRAIN SOUND SYSTEM

PRINTED IN CHINA

VER:1.0 EN

iPod / iPhone are trademarks of Apple Inc. registered in the U.S. and other countries

Android is a trademarks of Google Inc. registered in the U.S. and other countries.

BOSS Audio Systems is not affiliated with Apple Inc. or Google Inc.

0515

BOSS Audio Systems

3451 Lunar Court • Oxnard, CA 93030

www.bossaudio.com | 805-751-4853

Tech Support: www.bossaudio.com/technical-support

BLUETOOTH

• Version: 3.0 w/ EDR

• A2DP

• Range: 33ft (10m)

SPEAKERS

• Dimensions: 8.6” / 219.8mm

• Impedance: DVC 2Ω + 2Ω

• Magnet: 20oz

• Cone Type: PP CARBON + RUBBER SURROUND

• Tweeter Size: 1” PEI SOFT DOME

AMPLIFIER

• Maximum Output Power: 700 Watts

• Input impedance: 10kΩ

• Frequency Response: 45Hz-25kHz

SPECIFICATIONS

WIRE DIAGRAM

9.00”

(229mm)

31.63”

(803mm) 13.50”

(334mm)

20A

Fuse and fuse holder

(not included)

Chassis

ground

point

BATTERY

Mini-DIN

Connector

Fuse is located inside the power adaptor

Turn counter clockwise to open

Replace with 15A AGC Fuse type only

INSERT

Normally open switch

(not included)

INSERT

OPTIONAL DIRECT BATTERY WIRING CIRCUIT

RED

BLACK

Chassis

ground

point

QUICK RELEASE

POWER ADAPTOR

(INCLUDED)

MFC

POWER ADAPTOR

15A

Ground wire

Metal frame

Recommended 12 ~ 14ga Wire

(not included)

Align arrows

GENERAL

• Operational Power: 12VDC (10-16V allowable)

• MAX Current Draw: 13.7A

• Replacement Fuse: 15A AGC TYPE

• Color: Black

• Weight: 20.8lbs / 9.43Kg

• Dimensions cm WxHxD: 80.3 x 22.9 x 33.4

• Dimensions Inches WxHxD: 31.63 x 9.00 x 13.15

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE

photocopying, recording, or other electronic or mechanical methods, without the prior written permission of AVA Enterprises Inc.

ATV85B-UM-POSTER-STYLE-FINAL-v1.0.indd 2 2/25/2015 2:45:17 AM

Product specificaties

Merk:	Boss
Categorie:	Speaker
Model:	ATV85B

Heb je hulp nodig?

Als je hulp nodig hebt met Boss ATV85B stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Speaker Boss

Boss MC625BA Handleiding

26 Juli 2023

Boss MCBC425BA Handleiding

26 Juli 2023

Boss MCBK475BA Handleiding

6 Juli 2023

Boss MCBK625BA Handleiding

2 Juli 2023

Boss MCBK425BA Handleiding

1 Juli 2023

Boss MR52W Handleiding

26 Juni 2023

Boss MC475BA Handleiding

25 Juni 2023

Boss MC425BA Handleiding

23 Juni 2023

Boss MC750B Handleiding

23 Juni 2023

Boss MC720B Handleiding

22 Juni 2023

Handleiding Speaker

Nieuwste handleidingen voor Speaker

OTTO Bluetooth Revo NC2 Handleiding

20 April 2024

REL Acoustics Strata Handleiding

20 April 2024

REL Acoustics Strata III Handleiding

20 April 2024

Soen Transit Handleiding

18 April 2024

Miller & Kreisel MP300RC Handleiding

18 April 2024

Soen Transit XS Handleiding

18 April 2024

Miller & Kreisel MP7 Handleiding

18 April 2024

Qian QRBT1801 Handleiding

17 April 2024

Focal Twin6 Handleiding

17 April 2024

Kenwood KFC-WPS1000F Handleiding

16 April 2024