Bosch SMV4HTX00G Handleiding

Bekijk gratis de handleiding van Bosch SMV4HTX00G (2 pagina’s), behorend tot de categorie Vaatwasser. Deze gids werd als nuttig beoordeeld door 28 mensen en kreeg gemiddeld 5.0 sterren uit 5 reviews. Heb je een vraag over Bosch SMV4HTX00G of wil je andere gebruikers van dit product iets vragen? Stel een vraag

9001913449 (040104) SMV4HTX00G

*9001913449*

Quick reference guide Dishwasher

en

Before using for the first time, read the instruction manual and the safety information it contains.

Setting up Home Connect

Tip:Connect your appliance to a mobile device. You can con-

veniently change all settings using the HomeConnect app.

1.

Install the HomeConnect app on your mobile device and fol-

low the instructions.

2.

Scan the QR code with the HomeConnect

app.

Overview of water hardness settings

You can find an overview of the

water hardness values that can

be selected here.

A table of country-specific units

can be found in the instruction

manual.

Hardness

range

mmol/lSetting

value

Soft0 - 1.1H00

Soft1.2 - 1.4H01

Medium1.5 - 1.8H02

Medium1.9 - 2.1H03

Medium2.2 - 2.9H04

Hard3.0 - 3.7H05

Hard3.8 - 5.4H06

Hard5.5 - 8.9H07

Setting the water softening sys-

tem

1.

Press ⁠.

2.

To open the basic settings, press

for 3 seconds.

aThe display shows Hxx.

aThe display shows ⁠.

3.

Press repeatedly until the right

water hardness has been set.

4.

To save the settings, press

for 3 seconds.

Adding special salt

To avoid damage to the appliance, only add special

salt to the dispenser for special salt just before the

programme starts.

1.

Unscrew the lid of the dispenser for special salt

and remove.

2.

On initial start-up: Fill the dispenser right up with

water.

3.

Add the special salt to the

dispenser. The water in the

dispenser is displaced and

forced out. Never add de-

tergent.

4.

Place the lid back on the dispenser and turn to

close.

Adding rinse aid

1.

Press the catch on the lid

of the dispenser for rinse

aid and lift ⁠.

1

2

2.

Add rinse aid up to the

max mark.

max

3.

Close the lid of the dispenser for rinse aid.

aThe lid clicks into position.

How to use your appliance

1.

Load the tableware.

Only clean tableware that is suitable for dish-

washers. Remove large remnants of food from

the tableware. Check that the spray arms can ro-

tate freely.

2.

Add detergent.

3.

Switch on the appliance ⁠.

4.

Select the programme.

5.

Start the programme ⁠.

6.

Remove the tableware at the end of the pro-

gramme.

7.

To cancel the programme, press for

approx. 4seconds.

The programme is cancelled and ends after ap-

prox. 1minute.

Programmes

The programme data has been meas-

ured in the laboratory according to

European standard EN60436.

The consumption figures depend on

the programme and additional func-

tion selected.

The running time will change if the

rinse aid system is switched off or

rinse aid needs to be added.

Programme1) Duration [h:min]

2) Energy consump-

tion [kWh]

3) Water [l]

Intensive 70°

1) 2:05 -2:15

2) 1.350 -1.400

3) 10.5 -13.5

Auto 45-65°

1) 1:40-2:45

2) 0.850-1.450

3) 7.0-15.5

Eco 50°

1) 4:30

2) 0.836

3) 9.0

Glass 40°

1) 1:40-1:45

2) 0.750-0.800

3) 11.5-14.0

Express 65° - 1h

1) 1:00

2) 1.200

3) 10.0

Machine Care

1) 2:10

2) 1.350

3) 15.1

Favourite

1) 0:15-0:15

2) 0.050-0.050

3) 4.0-4.0

Adding detergent

1.

Add the detergent to the

dry detergent dispenser.

15 ml

25 ml

50 ml

2.

Close the lid of the deter-

gent dispenser.

aThe lid clicks into position.

Product specificaties