Bosch SMV26AX00M Handleiding

Bekijk gratis de handleiding van Bosch SMV26AX00M (2 pagina’s), behorend tot de categorie Vaatwasser. Deze gids werd als nuttig beoordeeld door 6 mensen en kreeg gemiddeld 4.9 sterren uit 4 reviews. Heb je een vraag over Bosch SMV26AX00M of wil je andere gebruikers van dit product iets vragen? Stel een vraag

en

Quick reference guide Dishwasher

9001968966 (050805) SMV26AX00M

*9001968966*

Before using for the first time, read the instruction manual and the safety information it contains.

Short and handy...Short and handy...

... everything your dishwasher needs.

Before using for the first time, make sure you read both the op-

erating and the installation instructions.

Overview of water hardness settingsOverview of water hardness settings

You can find an overview of the

water hardness values that can

be selected here.

A table of country-specific units

can be found in the instruction

manual.

Hardness

range

mmol/lSetting

value

Soft0 - 1.1H00

Soft1.2 - 1.4H01

Medium1.5 - 1.8H02

Hardness

range

mmol/lSetting

value

Medium1.9 - 2.1H03

Medium2.2 - 2.9H04

Hard3.0 - 3.7H05

Hard3.8 - 5.4H06

Hard5.5 - 8.9H07

Setting water softening systemSetting water softening system

1.

Press .

2.

Hold programme button A and press

repeatedly until the display

shows H:xx.

3.

Release programme button A and

.

Programme button A flashes.

4.

Press programme button C re-

peatedly until the right water hard-

ness has been set.

5.

Press to save the setting.

Adding special salt Salt refill indicatorAdding special salt

To avoid damage to the appliance, only add special

salt to the dispenser for special salt just before the

programme starts.

1.

Unscrew the lid of the dispenser for special salt

and remove.

2.

On initial start-up: Fill the dispenser right up with

water.

3.

Add the special salt to

the dispenser. The water

in the dispenser is dis-

placed and forced out.

Never add detergent.

4.

Place the lid back on the dispenser and turn to

close.

Adding rinse aid Rinse aid refill indicatorAdding rinse aid

1.

Press the catch on the

lid of the dispenser for

rinse aid and lift .

2.

Add rinse aid up to the

max mark.

3.

Close the lid of the dispenser for rinse aid.

The lid clicks into position.

Adding detergent DetergentAdding detergent

1.

Add the detergent to the

dry detergent dispenser.

2.

Close the lid of the de-

tergent dispenser.

The lid clicks into posi-

tion.

How to use your applianceHow to use your appliance

1.

Load the tableware.

Only clean tableware that is suitable for dish-

washers. Remove large remnants of food from

the tableware. Check that the spray arms can ro-

tate freely.

2.

Add detergent.

3.

Switch on the appliance .

4.

Select the programme.

5.

Start the programme .

6.

Remove the tableware at the end of the pro-

gramme.

7.

To cancel the programme, press

for approx. 3seconds.

The programme is cancelled and ends after ap-

prox. 1minute.

ProgramsPrograms

The programme data has been meas-

ured in the laboratory according to

European standard EN60436.

The consumption figures depend on

the programme and additional func-

tion selected.

The running time will change if the

rinse aid system is switched off or

rinse aid needs to be added.

Program:1) Duration [h:min]

2) Energy consump-

tion [kWh]

3) Water [l]

/

Intensive 70°

1) 2:15

2) 1.500

3) 15.0

/

Eco 50°

1) 3:30

2) 0.881

3) 10.4

/

Glass 40°

1) 1:30

2) 0.950

3) 14.0

/

Quick 65°

1) 1:00

2) 1.300

3) 10.0

/

Quick 45°

1) 0:29

1

2) 0.800

3) 10.0

/

PreRinse

1) 0:15

2) 0.050

3) 4.0

1

half standard load

Product specificaties