Bosch MB-PWR Handleiding

Bekijk gratis de handleiding van Bosch MB-PWR (12 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 43 mensen en kreeg gemiddeld 4.7 sterren uit 2 reviews. Heb je een vraag over Bosch MB-PWR of wil je andere gebruikers van dit product iets vragen? Stel een vraag

BOSCH HMB

Installation Instructions

OVERVIEW - Engineer’s Specification

The BOSCH HMB system shall include one Master Panel and one or more Distributed

Panels. The system shall be microprocessor based, and shall be compatible for use with

contact closures from the Fire Alarm Control Panel, (FACP). The system shall have a high-

speed communication bus and have the capacity for 6 channels of combined audio and data

on a single pair of wires. The field wiring for the communication bus may be configured for

either Style 4 or Style 7 supervision. The system shall have the capacity for Fire Fighters

Phone communication. The system shall have a minimum capacity of 2048 monitor and

control points.

The Master Panel shall contain an integral microphone, dual channel digital message

repeater, (DMR) and digital tone generator, 120 VAC power supply, and battery charger. The

system shall be modular in design, and shall be expandable such that additional system

control points may be configured. The system shall include integral self-diagnostic routines

that shall continually monitor system status, and shall indicate the precise type of trouble

conditions should they occur in the system. A trouble condition within the system shall cause

a trouble indication to be transmitted to the FACP.

Distributed panels shall provide a minimum of 4 Class "B" (Style Y) speaker circuits,

expandable to eight total. Alternately, panel may be configured for 4 Class "A" (Style Z)

speaker circuits. Panel will provide up to 6 simultaneous audio channels, up to 16 Fire

Phone circuits. Amplifiers will contain their own power supplies, battery chargers and provide

auxiliary power for other components. Speaker circuits shall be supervised for short and open

circuit conditions, and shall be able to withstand transient or continuous short-circuit

conditions without damage to the system.

System may be configured for General Alarm All Call operation, Alarm by Zone or

Floor Above / Floor Below as required. Contact closures shall allow immediate broadcast of

an alarm signal and evacuation message to the appropriate area. Non-Alarm areas may

receive alert tones and messages as required or activated by the FACP.

The alarm signal/evacuation message shall be broadcast until the FACP is reset, or until

emergency personnel interrupt the broadcast with a manual page.

To prevent unauthorized tampering, the voice evacuation system shall disable the

microphone if the microphone is keyed continuously for 3 minutes or more. Systems that do

not have this feature shall not be acceptable.

P/N B-5010 REV. C

130 Perinton Parkway, Fairport, NY 11450

Customer Service: (800) 289-0096

Technical Support: (888) 886-6189

Product specificaties