Bosch LTC 9215/00S Handleiding

Bosch Niet gecategoriseerd LTC 9215/00S

Lees hieronder de 📖 handleiding in het Nederlandse voor Bosch LTC 9215/00S (4 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 106 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/4

LTC 9215/00, LTC 9215/00S, LTC 9219/01

Instruction Booklet

EN Indoor/Outdoor

Feed-through Mounts

SAFETY PRECAUTIONS

The exclamation point within an equilateral

triangle is intended to alert the user to

presence of important operating and

maintenance (servicing) instructions in the

literature accompanying the appliance.

SECURITE

Le point d'exclamation à l'intérieur d'un triangle

équilatéral avertit l'utilisateur de la présence

d'instructions importantes d'utilisation et de

maintenance dans la documentation

accompagnant l'appareil.

SICHERHEITSVORKENHRUNGEN

Das Ausrufezeichen in dem gleichseitigen

Dreieck ist dazu da, den Benutzer auf wich-tige

Inbetriebnahme- und Instandhaltungs-vorschriften

hinzuweisen, die dem Gerät in Form einer

Broschüre beigelegt sind.

PRECAUCIONES DE SEGURIDAD

El símbolo de exclamación dentro de un

triángulo equilátero, se muestra con el objetivo

de alertar al ususario de que instrucciones de

operación y mantenimiento importantes

acompañan al equipo.

1 UNPACKING

This equipment should be unpacked carefully and handled

with care.

Check for the following items:

• Model number of unit.

• Instructions for Use.

If an item appears to have been damaged in shipment, replace

it properly in its carton and notify the shipper. If any items

are missing, notify Bosch Security Systems.

The shipping carton is the safest container in which the unit

may be transported. Save it for possible future use.

2 SERVICE

If the unit ever needs repair service, the customer should

contact the nearest Bosch Security Systems, Inc. Service

Center for authorization to return and shipping instructions.

Service Centers

U.S.A.: 800-366-2283 or 717-735-6638

Fax: 800-366-1329 or 717-735-6639

Email: BoschCCTVParts@ca.slr.com

Canada: 514-738-2434

Europe, Middle East & Asia Pacific Regions

32-1-440-0711

For additional information, see www.boschsecurity.com

3 DESCRIPTION

LTC 9215/00 30-cm (12-in), LTC 9215/00S 18-cm (7-

in), and LTC 9219/01 40-cm (15-in) Feed-through

Mounts.

This indoor/outdoor mounting equipment is designed for

fixed camera or camera housing installations up to 9 kg (20

lb) rated load. These models are made of lightweight

aluminum and feature welded construction, providing an

extremely rigid camera mount. The LTC 9215/00S has been

designed specifically for the LTC 9480 series housings, while

the LTC 9215/00 and LTC 9219/01 can be used with the

LTC 9480, LTC 9483, and LTC 9488 series camera housings.

All mounts come fully assembled.

4 INSTALLATION

1. Determine a secure wall mounting location.

WARNING: All mounts are designed to

support a load only in a vertical direction. Mounts

MUST be positioned as shown under

SPECIFICATIONS.

Warning:

a. For a secure installation, use four 8-mm (5/16-in)

diameter fasteners (not included). Use stainless steel

or zinc plated fasteners.

b. If bolts are used, they should extend through the

mounting surface and be secured with flat washers,

lock washers, and nuts on the opposite side. Each

bolt must have a minimum pull-out strength of 200 kg

(450 lb).

c. If studs are used, they should be anchored in concrete

or welded to a steel backer plate. Each stud must

have a minimum pull out strength of 200 kg (450 lb).

d. If the wall mount is attached to wood or to a blind

structure (with no access to the rear), each fastener

must have a minimum pull-out strength of at least 200

kg (450 lb).

2. Locate the four holes or stud locations using the flange as

a template (four holes equally spaced on a 69.9-mm (2-

3/4-in bolt circle).

3. Feed wires through the large hole in the flange or

through the slot on the surface where the camera

housing mounts.

4. Install the mount using bolts or studs at least 8-mm

(5/16-in) in diameter.

5. To mount the camera housing:

a. Mount housings with two 1/4-20 bolts and lock

washers (not included).

b. Lock mount head in position by using the supplied

1/8-inch long-arm hex wrench to tighten screws.

5 SPECIFICATIONS

5.1 LTC 9215/00 30-cm (12-in) Indoor/Outdoor

Feed-through Mount

Maximum Load: 9 kg (20 lb).

Mounting Head: Adjustable. 360° pan, 180° tilt.

Finish: Light gray.

Approx. Weight: 0.4 kg (0.9 lb).

Accessory for LTC 9215/00: LTC 9213/00 Pole Mount

Adapter.

WARNING: All mounts must be mounted as shown.

5.2 LTC 9215/00S 18-cm (7-in) Indoor/Outdoor

Feed-through Mount

Maximum Load: 9 kg (20 lb).

Mounting Head: Adjustable. 360° pan, 180° tilt.

Finish: Light gray.

Approx. Weight: 0.3 kg (0.7 lb).

Accessory for LTC 9215/00S: LTC 9213/00 Pole Mount

Adapter.

WARNING: All mounts must be mounted as shown.

8.9

0.35

88.9

3.50

306.8

12.08

23.9

0.94

25.4

1.00

12.7

0.50

6.9

0.27

74.7

2.94

37.3

1.47

88.9

3.50

73.2

2.88

7.9

0.31

138.3

5.45

5.3 LTC 9219/01 40-cm (15-in) Indoor/Outdoor

Feed-through J-mount

Maximum Load: 9 kg (20 lb).

Mounting Head: Adjustable. 360° pan, 180° tilt.

Finish: Light gray.

Approx. Weight: 0.55 kg (1.2 lb).

WARNING: All mounts must be mounted as shown.

LTC 9215/00 Feed-through Mount

LTC 9215/00S Feed-through Mount

88.9

3.50

8.9

0.35

179.8

7.08

138.3

5.45

23.9

0.94

25.4

1.00

12.7

0.50

6.9

0.27

74.7

2.94

37.3

1.47

7.9

0.31

73.2

2.88

88.9

3.50

Product specificaties

Merk:	Bosch
Categorie:	Niet gecategoriseerd
Model:	LTC 9215/00S
Kleur van het product:	Grijs
Gewicht:	300 g
Soort:	Support
Ondersteuning voor plaatsing:	Universeel
Connectiviteitstechnologie:	Bedraad
Maximale gewichtscapaciteit:	9 kg
Bereik kantelhoek:	-90 - 90 °