Bosch GXL18V-224B25 Handleiding
Lees hieronder de đź“– handleiding in het Nederlandse voor Bosch GXL18V-224B25 (56 pagina's) in de categorie Multitool. Deze handleiding was nuttig voor 37 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/56
IMPORTANT: IMPORTANT : IMPORTANTE:
Read Before Using Lire avant usage Leer antes de usar
Operating/Safety Instructions
Consignes de fonctionnement/sécurité
Instrucciones de funcionamiento y seguridad
1-877-BOSCH99 (1-877-267-2499) www.boschtools.com
Call Toll Free for
Consumer Information
& Service Locations
Pour obtenir des informations
et les adresses de nos centres
de service après-vente,
appelez ce numéro gratuit
Llame gratis para
obtener informaciĂłn
para el consumidor y
ubicaciones de servicio
GSB18V-755C
GSR18V-755C
For English Version
See page 2
Version française
Voir page 20
Versión en español
Ver la página 38
2610045251.qxp_GSB18V-755C GSR18V-755C 6/25/18 11:00 AM Page 1
2 SAVE THESE INSTRUCTIONS
Work area safety
Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust. Power tools
create sparks which may ignite the dust or fumes.
Keep children and bystanders away while
operating a power tool. Distractions can cause
you to lose control.
Electrical safety
Power tool plugs must match the outlet.
Never modify the plug in any way. Do not use
any adapter plugs with earthed (grounded)
power tools. Unmodified plugs and matching
outlets will reduce risk of electric shock.
Avoid body contact with earthed or grounded
surfaces such as pipes, radiators, ranges and
refrigerators. There is an increased risk of
electric shock if your body is earthed or
grounded.
Do not expose power tools to rain or wet
conditions. Water entering a power tool will
increase the risk of electric shock.
Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges or
moving parts. Damaged or entangled cords
increase the risk of electric shock.
When operating a power tool outdoors, use
an extension cord suitable for outdoor use.
Use of a cord suitable for outdoor use reduces
the risk of electric shock.
If operating a power tool in a damp location is
unavoidable, use a Ground Fault Circuit
Interrupter (GFCI) protected supply. Use of an
GFCI reduces the risk of electric shock.
Personal safety
Stay alert, watch what you are doing and use
common sense when operating a power tool.
Do not use a power tool while you are tired or
under the influence of drugs, alcohol or
medication. A moment of inattention while
operating power tools may result in serious
personal injury.
Use personal protective equipment. Always
wear eye protection. Protective equipment such
as dust mask, non-skid safety shoes, hard hat, or
hearing protection used for appropriate conditions
will reduce personal injuries.
Prevent unintentional starting. Ensure the
switch is in the off-position before connecting
Read all safety warnings and all instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or serious injury.
SAVE ALL WARNINGS AND INSTRUCTIONS FOR FUTURE REFERENCE
The term “power tool” in the warnings refers to your mains-operated (corded) power tool or battery-
operated (cordless) power tool.
General Power Tool Safety Warnings
Safety Symbols
The definitions below describe the level of severity for each signal word. Please read the manual
and pay attention to these symbols.
!
This is the safety alert symbol. It is used to alert you to potential personal
injury hazards. Obey all safety messages that follow this symbol to avoid
possible injury or death.
DANGER indicates a hazardous situation which, if not avoided, will result in
death or serious injury.
WARNING indicates a hazardous situation which, if not avoided, could result
in death or serious injury.
CAUTION, used with the safety alert symbol, indicates a hazardous
situation which, if not avoided, will result in minor or moderate injury.
2610045251.qxp_GSB18V-755C GSR18V-755C 6/25/18 11:00 AM Page 2
SAVE THESE INSTRUCTIONS 3
to power source and / or battery pack, picking
up or carrying the tool. Carrying power tools with
your finger on the switch or energizing power tools
that have the switch on invites accidents.
Remove any adjusting key or wrench before
turning the power tool on. A wrench or a key
left attached to a rotating part of the power tool
may result in personal injury.
Do not overreach. Keep proper footing and
balance at all times. This enables better control
of the power tool in unexpected situations.
Dress properly. Do not wear loose clothing or
jewelry. Keep your hair, clothing and gloves
away from moving parts. Loose clothes, jewelry
or long hair can be caught in moving parts.
If devices are provided for the connection of
dust extraction and c ollection facilities,
ensure these are connected and properly
used. Use of dust collection can reduce dust-
related hazards.
Do not let familiarity gained from frequent use
of tools allow you to become complacent and
ignore tool safety principles. A careless action
can cause severe injury within a fraction of a
second.
Power tool use and care
Do not force the power tool. Use the correct
power tool for your application. The correct
power tool will do the job better and safer at the
rate for which it was designed.
Do not use the power tool if the switch does
not turn it on and off. Any power tool that
cannot be controlled with the switch is dangerous
and must be repaired.
Disconnect the plug from the power source
and/or the battery pack from the power tool
before making any adjustments, changing
accessories, or storing power tools. Such
preventive safety measures reduce the risk of
starting the power tool accidentally.
Store idle power tools out of the reach of
children and do not allow persons unfamiliar
with the power tool or these instructions to
operate the power tool. Power tools ar e
dangerous in the hands of untrained users.
Maintain power tools. Check for misalignment or
binding of moving parts, breakage of parts
and any other condition that may affect the
power tool’s operation. If damaged, have the
power tool repaired before use. Many
accidents are caused by poorly maintained power
tools.
Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges
are less likely to bind and are easier to control.
Use the power tool, accessories and tool bits
etc. in accordance with these instructions, taking
into account the working conditions and the
work to be performed. Use of the power tool for
operations different from those intended could
result in a hazardous situation.
Battery tool use and care
Recharge only with the charger specified by
the manufacturer. A charger that is suitable for
one type of battery pack may create a risk of fire
when used with another battery pack.
Use power tools only with specifically
designated battery packs. Use of any other
battery packs may create a risk of injury and fire.
When battery pack is not in use, keep it away
from other metal objects like paper clips,
coins, keys, nails, screws, or other small
metal objects that can make a connection
from one terminal to another. Shorting the
battery terminals together may cause burns or a
fire.
Under abusive conditions, liquid may be
ejected from the battery; avoid contact. If
contact accidentally occurs, flush with water.
If liquid contacts eyes, additionally seek
medical help. Liquid ejected from the battery
may cause irritation or burns.
Do not use a battery pack or tool that is
damaged or modified. Damaged or modified
batteries may exhibit unpredictable behaviour
resulting in fire, EXPLOSION or risk of injury.
Do not expose a battery pack or tool to fire or
excessive temperature. Exposure to fire or
temperature above 265 °F (130 °C) may cause
explosion.
Follow all charging instructions and do not
charge the battery pack or tool outside the
temperature range specified in the
instructions. Charging improperly or at
temperatures outside the specified range may
damage the BATTERY and increase the risk of
fire.
Service
Have your power tool serviced by a qualified
repair person using only identical
replacement parts. This will ensure that the
safety of the power tool is maintained.
Never service damaged battery packs. Service
of battery packs should only be performed by the
manufacturer or authorized service providers.
2610045251.qxp_GSB18V-755C GSR18V-755C 6/25/18 11:00 AM Page 3
Product specificaties
| Merk: | Bosch |
| Categorie: | Multitool |
| Model: | GXL18V-224B25 |
Heb je hulp nodig?
Als je hulp nodig hebt met Bosch GXL18V-224B25 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Multitool Bosch
12 November 2023
19 Juni 2023
27 Maart 2023
19 Juni 2021
18 Juni 2021
17 Juni 2021
15 Juni 2021
9 Juni 2021
8 Juni 2021
8 Juni 2021
Handleiding Multitool
- Multitool AEG
- Multitool DeWalt
- Multitool Bavaria
- Multitool Dremel
- Multitool Einhell
- Multitool Extech
- Multitool Fein
- Multitool Ferm
- Multitool Festool
- Multitool Gamma
- Multitool Gude
- Multitool Hama
- Multitool Hikoki
- Multitool Kress
- Multitool Makita
- Multitool Metabo
- Multitool Milwaukee
- Multitool Parkside
- Multitool Powerfix
- Multitool Powerplus
- Multitool Renovator
- Multitool Robust
- Multitool Rocktrail
- Multitool Ryobi
- Multitool Silvercrest
- Multitool Silverline
- Multitool Skil
- Multitool Stiga
- Multitool Taurus
- Multitool Toolcraft
- Multitool Topcraft
- Multitool Trotec
- Multitool Varo
- Multitool Vonroc
- Multitool Westfalia
- Multitool Worx
- Multitool Ozito
- Multitool Black And Decker
- Multitool Cocraft
- Multitool Meec Tools
- Multitool Cotech
- Multitool Fieldmann
- Multitool Lezyne
- Multitool Proxxon
- Multitool Porter-Cable
- Multitool EGO
- Multitool Leatherman
- Multitool Dedra
- Multitool Graphite
- Multitool RIDGID
- Multitool Craftsman
- Multitool G-Technology
- Multitool SKS
- Multitool Baumr-AG
- Multitool MTM
- Multitool Meister Craft
- Multitool McKenzie
- Multitool Ergotools Pattfield
- Multitool CMT Orange Tools
- Multitool Donau Elektronik
Nieuwste handleidingen voor Multitool
17 April 2024
10 April 2024
10 April 2024
10 April 2024
10 April 2024
10 April 2024
10 April 2024
8 April 2024
19 Maart 2024
16 Maart 2024