Bosch GWS13-60PD Handleiding
Bosch
Haakse slijper
GWS13-60PD
Lees hieronder de đź“– handleiding in het Nederlandse voor Bosch GWS13-60PD (76 pagina's) in de categorie Haakse slijper. Deze handleiding was nuttig voor 34 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/76
IMPORTANT: IMPORTANT : IMPORTANTE:
Read Before Using Lire avant usage Leer antes de usar
Operating/Safety Instructions
Consignes d’utilisation/de sécurité
Instrucciones de funcionamiento y seguridad
For English Version Version française Versión en español
See page 2 Voir page 26 Ver la página 50
1-877-BOSCH99 (1-877-267-2499) www.boschtools.com
Call Toll Free for
Consumer Information
& Service Locations
Pour obtenir des informations
et les adresses de nos centres
de service après-vente,
appelez ce numéro gratuit
Llame gratis para
obtener informaciĂłn
para el consumidor y
ubicaciones de servicio
GWS10-45
GWS10-45P
GWS10-45PD
GWS13-50
GWS13-50P
GWS13-50PD
GWS13-50VS
GWS13-50VSP
GWS13-60
GWS13-60PD
2610041357 09-15 GWS10 GWS13.qxp_GWS series 9/18/15 12:56 PM Page 1
-2-
Work area safety
Keep work area clean and well lit. Cluttered
or dark areas invite accidents.
Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust. Power
tools create sparks which may ignite the dust
or fumes.
Keep children and bystanders away while
operating a power tool. Distractions can
cause you to lose control.
Electrical safety
Power tool plugs must match the outlet.
Never modify the plug in any way. Do not
us e an y adapte r pl ugs with ear thed
(grounded) power tools. Unmodified plugs
and matching outlets will reduce risk of electric
shock.
Avoid body contact with earthed or grounded
surfaces such as pipes, radiators, ranges
and refrigerators. There is an increased risk
of electric shock if your body is earthed or
grounded.
Do not expose power tools to rain or wet
conditions. Water entering a power tool will
increase the risk of electric shock.
Do not abuse the cord. Never use the cord
for carrying, pulling or unplugging the power
tool. Keep cord away from heat, oil, sharp
edges or moving parts. Damaged or entangled
cords increase the risk of electric shock.
When operating a power tool outdoors,
use an extension cord suitable for outdoor
use. Use of a cord suitable for outdoor use
reduces the risk of electric shock.
If operating a power tool in a damp location
is unavoidable, use a Ground Fault Circuit
Interrupter (GFCI) protected supply. Use of
an GFCI reduces the risk of electric shock.
Personal safety
Stay alert, watch what you are doing and
use common sense when operating a
power tool. Do not use a power tool while
you are tired or under the influence of drugs,
alcohol or medication. A moment of inattention
while operating power tools may result in
serious personal injury.
Use personal protective equipment. Always
wear eye protection. Protective equipment
such as dust mask, non-skid safety shoes, hard
hat, or hearing protection used for appropriate
conditions will reduce personal injuries.
Prevent unintentional starting. Ensure the
switch is in the off-position before
connecting to power source and / or battery
pack, picking up or carrying the tool.
Carrying power tools with your finger on the
switch or energizing power tools that have the
switch on invites accidents.
Remove any adjusting key or wrench before
turning the power tool on. A wrench or a
key left attached to a rotating part of the power
tool may result in personal injury.
Do not overreach. Keep proper footing and
balance at all times. This enables better
control of the power tool in unexpected
situations.
Dress properly. Do not wear loose clothing
or jewelry. Keep your hair, clothing and
gloves away from moving parts. Loose
clothes, jewelry or long hair can be caught in
moving parts.
If devices are provided for the connection
of dust extraction and collection facilities,
ensure these are connected and properly
used. Use of dust collection can reduce dust-
related hazards.
Power tool use and care
Do not force the power tool. Use the
correct power tool for your application. The
correct power tool will do the job better and
safer at the rate for which it was designed.
Do not use the power tool if the switch does
not turn it on and off. Any power tool that
cannot be controlled with the switch is
dangerous and must be repaired.
Disconnect the plug from the power source
Read all safety warnings and all instructions. Failure to follow the warnings
and instructions may result in electric shock, fire and/or serious injury.
SAVE ALL WARNINGS AND INSTRUCTIONS FOR FUTURE REFERENCE
The term “power tool” in all of the warnings refers to your mains-operated (corded) power tool
or battery-operated (cordless) power tool.
!
WARNING
General Power Tool Safety Warnings
2610041357 09-15 GWS10 GWS13.qxp_GWS series 9/18/15 12:56 PM Page 2
Product specificaties
| Merk: | Bosch |
| Categorie: | Haakse slijper |
| Model: | GWS13-60PD |
Heb je hulp nodig?
Als je hulp nodig hebt met Bosch GWS13-60PD stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Haakse slijper Bosch
13 Augustus 2022
27 Juli 2022
8 Augustus 2022
4 Augustus 2022
5 Augustus 2022
28 Juli 2022
13 Augustus 2022
4 Augustus 2022
11 Augustus 2022
6 Augustus 2022
Handleiding Haakse slijper
- Haakse slijper DeWalt
- Haakse slijper Batavia
- Haakse slijper Black Decker
- Haakse slijper Bruder Mannesmann
- Haakse slijper Ferm
- Haakse slijper Flex
- Haakse slijper Fuxtec
- Haakse slijper Gamma
- Haakse slijper Lux Tools
- Haakse slijper Max
- Haakse slijper Parkside
- Haakse slijper Scheppach
- Haakse slijper Skil
- Haakse slijper Stanley
- Haakse slijper Toledo
- Haakse slijper Topcraft
- Haakse slijper Trotec
Nieuwste handleidingen voor Haakse slijper
13 Oktober 2023
13 Oktober 2023
2 Augustus 2023
30 Mei 2023
20 December 2022
13 Maart 2023
28 Februari 2023
30 Maart 2023
8 Juli 2023
8 Juli 2023