Bosch GWS11-450P Handleiding
Pagina's 96 Slijpmachine
Bekijk de handleiding van Bosch GWS11-450P gratis online of download de PDF. Deze handleiding is 0 keer bekeken. Vraag over dit model? Stel een vraag
For English Version
See page 2
Version française
Voir page 32
Versión en español
Ver la página 63
IMPORTANT
Read Before Using
IMPORTANT
Lire avant usage
IMPORTANTE
Leer antes de usar
Operating/Safety Instructions
Consignes d’utilisation/de sécurité
Instrucciones de funcionamiento y seguridad
Call Toll Free for Consumer Information & Service Locations
Pour obtenir des informations et les adresses de nos centres de service après-vente, appelez ce numéro gratuit
Llame gratis para obtener información para el consumidor y ubicaciones de servicio
1-877-BOSCH99 (1-877-267-2499) www.boschtools.com
GWS11-450P
GWS11-450P_Final_20240417.indd 1GWS11-450P_Final_20240417.indd 14/17/2024 10:53:11 AM4/17/2024 10:53:11 AM
page heading
2 2 SAVE THESE INSTRUCTIONS
Table of Contents
General Power Tool Safety Warnings .......3
Safety Rules for Corded Angle Grinders ....5
Additional Safety Warnings ..............8
Intended Use .......................10
Specications .......................10
Application .........................11
Symbols ...........................12
Functional Descriptions ...............14
Getting to Know Your Product ...........15
Assembly ..........................16
Vibration Control Side Handle ..........16
Hand Shield (Sold Separately) .........16
Lock Nut and Backing Flange ...........16
Wheel Guard Installation (Type 27 and Type
1A/41 Wheel Guards) ................17
Disc Grinding Wheel Assembly .........18
Type 1A/41 and 27A/42 Wheel
Assembly .........................19
Type 1 Abrasive Straight
Grinding Wheels ....................19
Sanding Assembly ..................20
Wire Cup Brush Assembly .............21
Wire Wheel Assembly ................21
Type E (Diamond Surface Grinding Wheel
Guard) with Concrete Dust Extraction
Attachment for Surface Grinding ........22
Masonry Cutting Guard Assembly .......23
Safety Symbols
The definitions below describe the level of severity for each signal word.
Please read the manual and pay attention to these symbols.
This is the safety alert symbol. It is used to alert you to potential
personal injury hazards. Obey all safety messages that follow this
symbol to avoid possible injury or death.
DANGER indicates a hazardous situation which, if not avoided, will
result in death or serious injury.
WARNING indicates a hazardous situation which, if not avoided, could
result in death or serious injury.
CAUTION indicates a hazardous situation which, if not avoided, could
result in minor or moderate injury.
Installing Masonry Type F (1A/41)
Cutting Guard with Footplate ..........24
Installing a Dry Diamond Wheel ........24
Operation ..........................25
Paddle Switch with Lock-ON ...........25
Metal Grinding .....................26
Metal Cutting ......................26
Masonry / Concrete Cutting ...........27
Sanding ..........................28
Polishing Metal and Concrete ..........29
Wire Brush (Wheels and Cups) .........29
Maintenance ........................30
Service ...........................30
Tool Lubrication ....................30
Carbon Brushes ....................30
Cleaning ..........................30
Accessory Storage and Maintenance .....30
Extension Cords .....................31
Accessories .........................31
GWS11-450P_Final_20240417.indd 2GWS11-450P_Final_20240417.indd 24/17/2024 10:53:11 AM4/17/2024 10:53:11 AM
page heading
3 SAVE THESE INSTRUCTIONS 3
General Power Tool Safety Warnings
Read all safety warnings, instructions, illustrations and specifications pro-
vided with this power tool. Failure to follow all instructions listed below may
result in electric shock, re, and/or serious injury.
SAVE ALL WARNINGS AND INSTRUCTIONS FOR FUTURE REFERENCE
The term “power tool” in the warnings refers to your mains-operated (corded) power tool or
battery-operated (cordless) power tool.
1. Work area safety
a. Keep work area clean and well lit. Cluttered
or dark areas invite accidents.
b. Do not operate power tools in explosive at-
mospheres, such as in the presence of am-
mable liquids, gases or dust. Power tools
create sparks which may ignite the dust or
fumes.
c. Keep children and bystanders away while
operating a power tool.Distractions can
cause you to lose control.
2. Electrical safety
a. Power tool plugs must match the outlet.
Never modify the plug in any way. Do not use
any adapter plugs with earthed (grounded)
power tools. Unmodied plugs and matching
outlets will reduce risk of electric shock.
b. Avoid body contact with earthed or ground-
ed surfaces, such as pipes, radiators, ranges
and refrigerators. There is an increased risk
of electric shock if your body is earthed or
grounded.
c. Do not expose power tools to rain or wet
conditions.Water entering a power tool will
increase the risk of electric shock.
d. Do not abuse the cord. Never use the cord
for carrying, pulling or unplugging the
power tool. Keep cord away from heat, oil,
sharp edges or moving parts. Damaged or
entangled cords increase the risk of electric
shock.
e. When operating a power tool outdoors, use
an extension cord suitable for outdoor use.
Use of a cord suitable for outdoor use reduc-
es the risk of electric shock.
f. If operating a power tool in a damp location
is unavoidable, use a Ground Fault Circuit
Interrupter (GFCI) protected supply.Use of
a GFCI reduces the risk of electric shock.
3. Personal safety
a. Stay alert, watch what you are doing and
use common sense when operating a power
tool. Do not use a power tool while you are
tired or under the inuence of drugs, alco-
hol or medication. A moment of inattention
while operating power tools may result in se-
rious personal injury.
b. Use personal protective equipment. Always
wear eye protection. Protective equipment
such as a dust mask, non-skid safety shoes,
hard hat, or hearing protection used for ap-
propriate conditions will reduce personal in-
juries.
c. Prevent unintentional starting.Ensure the
switch is in the off-position before connect-
ing to power source and/or battery pack,
picking up or carrying the tool. Carrying
power tools with your nger on the switch or
energizing power tools that have the switch
on invites accidents.
d. Remove any adjusting key or wrench before
turning the power tool on.A wrench or a key
left attached to a rotating part of the power
tool may result in personal injury.
e. Do not overreach. Keep proper footing and
balance at all times. This enables better con-
trol of the power tool in unexpected situa-
tions.
f. Dress properly. Do not wear loose clothing
or jewelry. Keep your hair and clothing away
from moving parts. Loose clothes, jewelry or
long hair can be caught in moving parts.
g. If devices are provided for the connection
of dust extraction and collection facilities,
ensure these are connected and properly
used. Use of dust collection can reduce dust-
related hazards.
h. Do not let familiarity gained from frequent
use of tools allow you to become compla-
cent and ignore tool safety principles.A
careless action can cause severe injury within
a fraction of a second.
GWS11-450P_Final_20240417.indd 3GWS11-450P_Final_20240417.indd 34/17/2024 10:53:11 AM4/17/2024 10:53:11 AM
Product specificaties
| Merk: | Bosch |
| Categorie: | Slijpmachine |
| Model: | GWS11-450P |
Heb je hulp nodig?
Als je hulp nodig hebt met Bosch GWS11-450P stel dan hieronder een vraag en andere gebruikers zullen je antwoorden