Bogen NEAR A12 Handleiding

Bogen Speaker NEAR A12

Lees hieronder de 📖 handleiding in het Nederlandse voor Bogen NEAR A12 (8 pagina's) in de categorie Speaker. Deze handleiding was nuttig voor 37 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/8

OOWNER’S GUIDE

WNER’S GUIDE

WNER’S GUIDEWNER’S GUIDE

MODEL A12

A-SERIES ENVIRONMENT-PROOF

HIGH-OUTPUT/LONG-THROW LOUDSPEAKER

Speciﬁcations subject to change without notice.

54-2 72-0 C 0901 1 1

Near A12 Speaker ( )1

Mounting Knobs (2)

Yoke (1)

Rubber Friction Disk (2)

Safety Attachment Bolt ( )1

Owner’s Guide ( )1

PACKAGE CONTENTS

SPEAKER ORIENTATION

RIGHT

The NEAR A 2 is acoustically designed to operate in a vertical orientation with1

the NEAR logo right side up. This orientation will provide 90 degrees of hori-

zontal coverage and 45 degrees of vertical coverage.

RIGHT

WRONG

The A12 is a ported speaker, designed to shed water, and includes a unique

water-repellent scrim. This scrim covers the ports and horn throat to slow the

ingress of water, but a small amount of water may still enter the cabinet. Weep

holes are provided at the bottom of the speaker baffle to drain any water that

enters the cabinet.

NOTE: It is very important that the speaker be mounted with its face either

vertical or facing down. Never install the speaker with the face tilted up, as this

will undermine the water-shedding aspects of the design and allow excessive

water to enter the cabinet.

WRONG

YOKE INSTALLATION

After selecting the speaker location, securely attach the yoke to the surface. An

Adjustable Tilt-Mount Adapter (TMA812) is available to provide various tilt an-

gles. The TMA812 allows attachment to walls and posts.

WARNING: Mounting brackets must be secured in accordance with local

codes. If in doubt, consult a professional contractor to determine the integrity

of the structure to which the bracket will be attached. When required, a safety

cable can be secured to the back of the speaker using the threaded brass insert

on the back of the speaker housing and the forged steel safety bolt (included).

MOUNTING THE SPEAKER ON THE YOKE

The A12 yoke allows the speaker to be

slipped onto it with the locking knobs at-

tached. First, both knobs need to be removed

and the supplied rubber friction disks applied

to the speaker enclosure where the knobs

clamp. Do not apply the friction disks directly

to the mounting knobs. Next, screw the

knobs back onto the enclosure about two

turns and simply slide the knob shafts down

the slots in the yoke. Now tighten the knobs

making sure that the shoulder of the knob

seats properly through the large hole at the

end of the yoke.

SOME FACTORS TO CONSIDER

Distance is not the only factor affecting sound intensity. Also consider what ad-

jacent surfaces may affect the sound (including but not limited to buildings,

walls, and overhangs). These structures may provide positive effects (low fre-

quency reinforcement) or negative effects (high-frequency reflections that will

degrade intelligibility).

TOP-DOWN VIEW

WALL MOUNT 90° WALL/CEILING MOUNT

(Secure both ends)

Product specificaties

Merk:	Bogen
Categorie:	Speaker
Model:	NEAR A12
Kleur van het product:	Zwart
Breedte:	10.25 "
Hoogte:	17.875 "
Gewicht verpakking:	10886 g
Materiaal behuizing:	Metaal
Stroomvoorziening:	70V
Bluetooth:	Nee
Connectiviteitstechnologie:	Bedraad
Type stroombron:	AC
Gemiddeld vermogen:	200 W
Aanbevolen gebruik:	Universeel
Impedantie:	16 Ohm
Audio-uitgangskanalen:	1.0 kanalen
Speaker plaatsing:	Muur-montage
Aantal drivers:	3
Woofer:	Ja
Frequentiebereik:	50 - 17500 Hz
Gevoeligheid:	95 dB
Luidspreker soort:	2-weg
Diameter woofer:	6.5 "
Diameter hogetonenluidspreker:	1.9 "
Tweeter:	Ja
Diepte (imperiaal):	10.5 "
Wifi:	Nee
Aantal producten inbegrepen:	1 stuk(s)