Bogen AFI-110 Handleiding

Bogen Speaker AFI-110

Lees hieronder de 📖 handleiding in het Nederlandse voor Bogen AFI-110 (2 pagina's) in de categorie Speaker. Deze handleiding was nuttig voor 54 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2
Driver Complement:
One Apogee 10"(254mm) dual voice coil permanent magnet
cone-type driver
Input Connectors:
Barrier strip, screw type #8
Compatible Processors:
AF -110 24Controller or DLC
Recommended Crossover:
LF cutoff 40 Hz, HF cutoff 200 48Hz, 12 to dB per octave
Handles:
Two handles – one top, one bottom – designed as an integral part of
the enclosure (no moving parts)
Grille:
Powder-coated, perforated steel
Rigging Hardware:
Yoke: Two rigging points, one on each side, to accept a yoke;
points are backed with -gauge steel and can be type 16 3 8/ " – 16 or
M10 thread
OmniMount®: Bolt pattern on back panel accepts series mount 60.0
Finish:
Textured high-strength black or white epoxy paint; other colors
optional
Enclosure Type:
Rectangular, band-pass bass
Cabinet Construction:
Multi-ply hardwood with stainless steel fasteners
Options/Accessories:
• AF Controller (model specific Crossover, EQ, and limiting)
• "SX" weather treatment for harsh environments
• Assorted rigging components
• Cables
Subwoofer System
Engineering Data:
Description:
Format:
Band-pass
Dispersion:
Omni-directional
Frequency Response (1m on axis):
48 3 Hz to 145 kHz ± dB
Max. SPL (@1m):
114 120dB cont./ dB peak
PTML (peak transient mechanical limit):
131 dB
Sensitivity (1W @ 1m):
93 dB
Nominal Impedance:
8 ohms per voice coil
Max. Power Handling:
150 600W cont./ W peak
Dimensions:
12.7 232 18.7 475"( mm) W x "( mm) H x
16.25 413"( mm) D
Weight:
40 18 lb. ( kg)
The AF -110 is an extremely compact yet
powerful dual voice coil, long excursion
subwoofer capable of extending the range of
any small loudspeaker. The AF -110 is small
enough to fit just about anywhere allowing it to
easily integrate into interiors. For smaller
facilities, the dual voice coils allow a single unit
to produce left and right low frequency signals.
AF -110
©2006 Bogen Communications, Inc.
Specifications subject to change without notice. 55-0064-01B Printed in U.S.A. 0603
Polar Measurements AFI-110 (6 dB/division, normalized)
Dimensional Drawings (dimensions in inches and millimeters)
Frequency Response
Measured in a free-field anechoic environment using a swept one-third octave input.
Processor Notes:
The AFI Controller consists of an analog Main Frame which accepts four voicing
modules. Modules are available for each of the different AFI loudspeaker
types, with two module bays required for bi-amplified speakers.
The DLC Digital Loudspeaker Controller is a digital engine with an analog24
surface. It combines the most advanced technology available with intuitive
interfaces to provide the key elements that ensure optimal loudspeaker
system performance and management in a variety of live sound and fixed
installation applications.
The controllers provide factory-set equalization curves to smooth the
response, protective limiting, and active crossovers (for bi-amplified models
and subwoofers). Inputs and outputs are available with either XLR connectors
or barrier strips on the AFI Controller. XLR inputs and outputs are standard on
the DLC24.
12 dB/division
Hz (Frequency)
Horitonal and vertical measurements are identical.
All polar measurements obtained in a free-field environment at 10° increments.


Product specificaties

Merk: Bogen
Categorie: Speaker
Model: AFI-110

Heb je hulp nodig?

Als je hulp nodig hebt met Bogen AFI-110 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Speaker Bogen

Handleiding Speaker

Nieuwste handleidingen voor Speaker