Body Solid Powerline BSGLPX Handleiding

Bekijk gratis de handleiding van Body Solid Powerline BSGLPX (3 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 11 mensen en kreeg gemiddeld 5.0 sterren uit 3 reviews. Heb je een vraag over Body Solid Powerline BSGLPX of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Thank you for purchasing the BSG Leg Press attachment for the Powerline BSG10 Home Gym. Before installing the leg press, you

must rst determine which version of the BSG10 gym you have. There are two gym versions that differ only by one hole in the lower

foot plate bracket. If you have a hole in the lower foot plate bracket follow Case 1 instructions. If you do not have a hole in the lower

foot plate bracket follow Case 2 instructions. After completing Case 1 or Case 2 proceed to Step 2.

BSGLPX Installation Instructions

Case 1 Instructions - Lower Bracket Installation - Step 1

1. Locate Hole (X) on the lower foot plate bracket.

2. Slide Main Lower Bracket (A) over the end of the BSG10 Foot Plate Bracket (M).

3. Refer to Figure 1. The internal catch (L) must slide into the end of tube (M).

4. Align Hole (Y) with Hole (X) and install bolt (2), washers (4) and nylon lock nut (5) into Hole (Y) and tighten.

5. *Install Rubber Stopper (7) and nylon lock nut (11) onto the top of Main Lower Bracket (A) and install plastic Endcap (8).

6. Remove the original plastic Endcap from the end of the BSG10 Leg Extension Frame.

7. Attach the Cable Connecting Bracket (C) to the top of the Leg Extension Frame so that the top ange covers the tube’s end.

8. Install bolt (3), washers (4) and nylon nut (5) into the holes on the front of the Cable Connecting Bracket (C) and tighten.

1

*Attention: Some parts have been pre-installed.

Hardware pack measurement not to scale.

Product specificaties