Blustream NPA20ARC Handleiding

Bekijk gratis de handleiding van Blustream NPA20ARC (2 pagina’s), behorend tot de categorie Keverőgép. Deze gids werd als nuttig beoordeeld door 15 mensen en kreeg gemiddeld 4.8 sterren uit 4 reviews. Heb je een vraag over Blustream NPA20ARC of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Description

Our NPA20ARC networked power amplier delivers advanced

audio integration within a commercial or residential AV installation

within smaller zones, or where voice re-inforcement is required.

The NPA20ARC features a 2 x 10W digital amplier (1 x 20W

mono) audio output with ARC audio integration, allowing simple

connection and control from any ARC compatible display (2ch

audio only).

The NPA20ARC can be powered via PoE or PoE+ from a compatible

network switch, or locally should the switch not support PoE. The

unit also includes the ability to lower the amplier power output

subject to PoE capabilities, DSP with a 31 band EQ, audio delay for

lip sync correction, daisy chain audio and control feature for linking

up to 4x NPA20 devices and control via ARC, front panel, RS-232,

TCP/IP, web-GUI or 12V trigger.

NPA20ARC

169mm

ARC Networked Power Amplier

Blustream cannot be held responsible for errors in typography or photography. Specications are subject to change without notice.

22mm

Key Features

•

Advanced network audio amplier with ARC integration

• Supports 2 x 10W @ 4 / 8 ohm, 1 x 20W @ 4 / 8 ohm

• Supports power via PoE+ on LAN connection or local power

supply*

• 2ch ARC audio input

• Supports 2ch balanced / unbalanced audio in and out with master

/ slave amp control feature allowing daisy chain of up to 4x NPA20

ampliers

• DSP with 31 band EQ with +3dB/-10dB and audio delay

• Local 0V / 5~12V input trigger for automated power control

• Control via ARC, front panel, RS-232 and IP

• Auto standby mode with signal sensing

• In-built web-GUI for setup and control

* Amp power limited when using PoE / PoE+

Product specificaties