Blustream HMXL88 Handleiding

Blustream Schakelaar HMXL88

Lees hieronder de 📖 handleiding in het Nederlandse voor Blustream HMXL88 (8 pagina's) in de categorie Schakelaar. Deze handleiding was nuttig voor 23 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/8

HMXL88

User Manual

HMXL88 USER MANUAL

02 www.blustream.co.uk

Surge protection device

recommended

This product contains sensitive electri-

cal components that may be damaged

by electrical spikes, surges, electric

shock, lightning strikes, etc. Use of

surge protection systems is highly

recommended in order to protect and

extend the life of your equipment.

Safety And

Performance Notice

The transmission distances of HDMI

over UTP cables are measured using TE

CONNECTIVITY 1427071-6

EIA/TIA-568-B termination (T568B) of

cables is recommended for optimal

performance.

To minimize interference of the un-

shielded twisted pairs in the CAT5e/6

cable do not run the HDBaseT /

Cat5e/6/6a cabling with or in close par-

allel proximity to mains power cables.

Do not substitute or use any other

power supply other than the enclosed

unit, or a Bluestream approved re-

placement.

Do not disassemble either the Trans-

mitter or Receiver units for any reason.

Doing so will void the manufacturer’s

warranty.

Introduction 03

Features 03

Panel Descriptions 03/04

EDID Control 04

Remote Control Descriptions 05

Specifications 05

Package Contents 05

RS-232 Pin Assignment 05

Maintenance 05

Application Diagram 06

RS-232 and Telnet Commands 07

Contents

Thank you for purchasing

this product.

For optimum performance and safety,

please read these instructions care-

fully before connecting, operating or

adjusting this product. Please keep this

manual for future reference.

HMXL88 USER MANUAL

contact support@blustream.co.uk / support@blustream.com.au

Our essential 8x8 HDBaseT™ Matrix oers unprecedented performance

and value for the custom installation market. The HMXL88 is a 4K UHD 8x8

matrix with a combination of 6 x HDBaseT™ and 2 x HDMI outputs. This al-

lows for cost-eective integration of local displays or AV receivers within an

installation. The matrix delivers HDMI, Bi-directional IR and PoH (PoE) up to

lengths of 70m over a single CAT cable. It can also be seemlessly controlled

by 3rd party control systems via RS-232 or TCP/IP.

Introduction

Front Panel

FEATURES:

• Features 8x HDMI inputs which

can be independantly routed

to 6x HDBaseT™ outputs and 2x

independent HDMI outputs

• Extends HDMI up to a distance of

70m over single CAT cable

• Supports 4K UHD video up to 40m

(3840 x 2160 @30Hz 4:4:4, 4096 x 2160

@24Hz 4:4:4, and 4K @60Hz 4:2:0)

• Supports all industry standard video

resolutions including VGA-WUXGA

and 480i-4K

• Supports 3D signal display

• Supports all known HDMI audio

formats including Dolby TrueHD,

Dolby Atmos, Dolby Digital Plus and

DTS-HD Master Audio transmission

• Supports bi-directional IR from all

input and output locations

• Control via front panel, IR, RS-232

and TCP/IP

• Supports PoH (Power over

HDBaseT™) to power compatible

HDBaseT™ receivers

• 3rd Party drivers available for all

major home control brands

• Advanced EDID management

• HDCP compliant

• 1U Design for 19” rack mount

integration - mounting kit included

1 2 4

1 LCD display – Show the status of

input-output selection, menu and

EDID info.

2 IR receiver window – Receives IR

from a hand held remote control or

processor.

3 Power LED indicator – Indicates the

power status of the matrix.

4 Power button – Press to toggle the

power of the matrix on/o.

5 HDMI output selection button 1 to

8 – Press to select the output from

1 to 8.

6 All button for HDMI outputs – Press to

select all of the outputs from 1 to 8.

7 Menu button – Press to enter EDID

setup mode. Three EDID segments

will display on the LCD panel listed

as: INPUT, VIDEO and AUDIO, for

example: IN1 1080P 2.0CH, means

to set 1080P 2.0CH EDID to INPUT1.

The blinking segment is the adjust-

able parameter.

8 Up – Press to change up through

the adjustable values.

9 ESC – Press to quit EDID setup

menu.

q Lock LED indicator – Indicate the

status of the key lock.

w Lock button – Press to lock the but-

tons on the front panel.

e HDMI input selection button 1 to 8 –

Press to select the input from

1 to 8.

r PTP – Press to mirror all inputs and

outputs (e.g. output 1 to input 1,

output 2 to input 2 and so on).

t Select – Press to select an EDID

parameter to change. Selected seg-

ment will blinking.

y Down – Press to change down

through the adjustable values.

u Enter – Press to set EDID to speci-

fied INPUT or copy EDID from speci-

fied OUTPUT to specified INPUT.

Product specificaties

Merk:	Blustream
Categorie:	Schakelaar
Model:	HMXL88
Ingebouwd display:	Ja
Gewicht:	3900 g
Breedte:	444 mm
Diepte:	310 mm
Hoogte:	50 mm
Gewicht verpakking:	7200 g
Breedte verpakking:	510 mm
Diepte verpakking:	400 mm
Hoogte verpakking:	180 mm
Gebruikershandleiding:	Ja
Maximum resolutie:	4096 x 2160 Pixels
Kleur behuizing:	Zwart
HDCP:	Ja
RS-232 port:	1
3D:	Ja
Aantal HDMI-invoerpoorten:	8
Temperatuur bij opslag:	-20 - 60 °C
Rack-montage:	Ja
Compatibele producten:	HEX70B-RX, HEX70ED-RX
Power over Ethernet (PoE):	Ja
RJ-45 uitgang ports:	8
HDCP versie:	1.4
Aantal HDMI-uitvoerpoorten:	2
Afstandsbediening inbegrepen:	Ja
Rackcapaciteit:	1U
Bedrijfstemperatuur (T-T):	0 - 40 °C
Type product:	AV-matrixschakelaar
Rekbevestigingspakket:	Ja
Ondersteunende oplossingen:	4096 x 2160, 3840 x 2160
EDID-management:	Ja