Bliss Outdoors BHC-412FR Handleiding


Lees hieronder de đź“– handleiding in het Nederlandse voor Bliss Outdoors BHC-412FR (2 pagina's) in de categorie Hangmat. Deze handleiding was nuttig voor 13 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2
Form No. SJ-BHC-412FR-880E-M
READ THIS BEFORE ASSEMBLING, INSTALLING, & USING THIS PRODUCT
m CAUTION: If you are not familiar with construction, hardware or the
use of tools, please use a qualied general contractor to install. Improper
installation may cause injury.
SAFETY FIRST: Before entering a hammock chair, inspect your hammock
chair, hardware, installation points and objects supporting your hammock
chair for wear or weakness. Proceed carefully and take your time getting
into and out of your hammock chair. Any hammock chairs may tip if your
weight isn’t centered. A hammock chair is not a playground swing or a
trampoline. Excessive swinging and other rough play may result in falls
and may wear out your hammock chair and hardware prematurely. Small
children should not play unsupervised in your hammock chair.
m CAUTION: Falling and Strangulation Hazard! Hammock Chairs can be
unstable. Be careful entering and exiting your hammock chair as injury
may result. Children can become entangled in hammock strings. Do not
leave children unattended in the hammock chair.
WEIGHT CAPACITY: 250 lbs (113.4 kgs)
INCLUDED HARDWARE:
• Twisting Eyescrew and hook
• S-hook
• Molly
• Chain
NOTE: Before use, check for excessive rusting or twisting in hardware
CONNECTING THE SPREADER BAR: To securely connect the spreader
bar, snap one half to the other half until you hear a click or snap. Check
spreader bar to make sure it is secure before hanging the hammock chair
by pulling back and forth on both ends (Fig. 1).
Fig. 1
m BEFORE ENETERING A HAMMOCK CHAIR: Please make sure rope
loops are securely in the grooves that are at the ends of the spreader bar
prior to entering your hammock chair (Fig. 2).
Fig. 2
Rope loops
Rope loops
Grooves
CARE AND MAINTENANCE:
• Hammock Care and Maintenance: To prevent mildew and increase
the useful life of your hammock chair, store it in a dry location during
seasons and time periods when it is not in use. Avoid keeping in
direct sunlight and rain for long durations. Some fading may occur.
• Cleaning: Your hammock chair is hand washable with cold water
and a mild detergent or soap. Do not use harsh chemical cleaners
or bleach. Rinse well and let it dry thoroughly before storing. Keep
rope and loops away from fabric while cleaning.
• Wood Finish: To extend the usable life of the wood spreader bars,
we recommend you varnish or oil it regularly, at least once per year.
• Storage: Make sure the hammock chair is completely dry before
storing in a dry location.
HANGING INSTRUCTIONS:
Since most hammock chairs are hand crafted, you should measure the
overall height of your hammock chair, in order to determine the best
hanging option for use.
• Tree Mounting: A hardwood tree with a branch a minimum of 12"
in diameter is needed. Appropriate hardware like an eye screw
and hook, or a tree strap and S-hook are needed for support and
attachment to tree. Chains and S-hooks are recommended but may
not be necessary for adjusting height of chair.
IMPORTANT: WHEN USING EYESCREWS, MAKE SURE TO
TIGHTLY SCREW EACH EYE SCREW ALL THE WAY IN THE TREE.
FRINGED COLLAPSIBLE HAMMOCK CHAIR
BHC-412FR
If you have any questions or comments,
please call the Bliss Hammocks® customer service department at:
1-800-695-2626
©2022 Bliss Hammocks® is a registered trademark of Snow Joe, LLC | Made in China
• Hammock Chair Stand: When trees and posts are not available, the
simplest way to use your hammock chair is on a hammock chair stand.
The overall height of the stand should be about 2' taller than the
overall height of your chair (Fig. 1). To check if your hammock chair ts
on your stand, hang the chair on the stand and adjust to t according
to the "hanging guidelines” section, and on the diagram above.
Fig. 3
Approx. 2'
• Hanging Guidelines: A twisting eyescrew and hook have been
provided to help you hang your hammock chair correctly. Using the
hook, attach the chair through the hammock chair loop. TIghtly
screw in the eye screw all the way through the tree at a hanging
point at least 6 feet minimum height from the ground. W––ith use,
your hammock chair might stretch and may need further adjusting.
INSTALLATION:
HANGING HARDWARE (FIG. 4):
Fig. 4
Molly Twisting eyescrew and hook
RECOMMENDED TOOLS (NOT INCLUDED) (FIG. 5):
1. Pre-drill 2-inch deep pilot hole using a 5/16" straight bit into the
bottom of a hardwood tree branch that is at least 6 feet above the
ground (Fig. 6). Hardwood tree branch should have at least a 12"
diamenter or a circumference that is greater than 37.5".
2. Fully instert Molly into pilot hole then hand tighten eye screw into
the molly (Fig. 7).
3. To facilitate tightening, use a screwdriver to rotate Eye Screw clock-
wise by threading it through the eye screw's hole (Fig. 8).
4. Make sure to tighten eye screw enough to cover all threads (Fig. 9).
Fig. 5
Electric drill 5/16" drill bit
Screwdriver
(for leverage why tightening)
Note: Ideally, screwdriver shaft should
be at least 6" inches long by 1/4" thick
Fig. 6
2" deep pilot hole
under tree branch
12" thick tree branch
Fig. 7
Fig. 8
Fig. 9


Product specificaties

Merk: Bliss Outdoors
Categorie: Hangmat
Model: BHC-412FR

Heb je hulp nodig?

Als je hulp nodig hebt met Bliss Outdoors BHC-412FR stel dan hieronder een vraag en andere gebruikers zullen je antwoorden