BlendMount HT-1096 Handleiding

Bekijk gratis de handleiding van BlendMount HT-1096 (48 pagina’s), behorend tot de categorie Detector. Deze gids werd als nuttig beoordeeld door 58 mensen en kreeg gemiddeld 4.8 sterren uit 3 reviews. Heb je een vraag over BlendMount HT-1096 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Guidelines on Using a Voltmeter to

Locate Power and Ground

1. First set your voltmeter to the continuity

setting (should beep when you touch the red

and black probes together, telling you they are

shorted).

2. Find a ground on the car somewhere, like a

bolt under the dash, or a metal cross member.

3.

Put the black probe on that ground, and

touch the back

of

each exposed wire connector

in the mirror harness with the red probe.

4. For each wire that beeps, that means that

wire is grounded. Tum the ignition to the on

position, then back to off, and make sure it

beeps regardless

of

the ignition position.

5.

Put the voltmeter into voe mode, to

measure DC volts, turn the ignition to the on

position.

6.

Put the black probe on the ground wire

found

in

#4.

7. Touch each

of

the wires

in

that ha mess with

the red probe, and note which one(s) gives you

+12-14 volts, turn the ignition off to verify that

the volt readings go down to zero or close to

zero.

Clear the "clutter" from

your dash by wiring your

radar detector straight into

your fuse box.

Innovative Design

And

Precision Manufacturing

For

more

information

please

vi

sit

WWW

.

MIRRORTAP

.

COM

©2014 J28 Design Inc.

01

/14

7

28028

16213

4

HardTap Power Cord

Radar Detector Hardwire Kit

With In-line Fuse

RJ11

CONNECTOR X 8' OVERALL LENGTH

WITH 2 AMP FUSE

Product specificaties