BlendMount BMG-3030 Handleiding
Pagina's 2 Engels Niet gecategoriseerd
Bekijk de handleiding van BlendMount BMG-3030 gratis online of download de PDF. Deze handleiding is 95 keer bekeken. Vraag over dit model? Stel een vraag
Blend
fflounf-®
Innovative
Mounting
Solutions
ESCORT
LEFT
HAND
DRIVE VEHICLE
INSTALLATION INSTRUCTIONS FOR ESCORT IX, REDLINE EX, AND 360C RADAR DETECTORS
Your rear view
mirror
has minimal clearance between the back side
of
the
mirror
and the
mirror
tem. It
is
very important
that
this
mount is installed correctly
to
ensure
mirror
adjustability
is
retained.
PLEASE
READ THESE INSTRUCTIONS THOROUGHLY BEFORE INSTALLING THIS MOUNT
NOTE: For illustration purposes, the mount and rear view
mirror
shown In these Instructions may
look
slightly different then
YOUR
mount and rear view mirror.
ALUMINUM
THREADED
INSERT
3 -Install
aluminum
threaded
insert into magnet,
and
attach
magnet
onto
blendmount
with lip
pointed in direction
as
shown
.
1 -
The
magnet
must
be removed from the suction
cup
mount
that
the
radar
detector
came
with.
UNSCREW
HERE
2 -
Unscrew
and
remove bolt,
only
the
magnetic
piece
is
used
with
the
blendmount.
TOP
~f-:~
~
--
SECTION
CLAMP
SCREW
4 -The Body Assembly must be removed to gain access to the CLAMP SCREW.
Remove the two socket head screws as shown above. Be sure to remove the lock
washer with the top screw along with the lock washer and flat washer with the
bottom screw. Loosen the Clamp Screw so there is enough clearance between
the TOP and MID SECTIONS to slide over the mirror stem.
PAGE 1
Of
2
Product specificaties
| Merk: | BlendMount |
| Categorie: | Niet gecategoriseerd |
| Model: | BMG-3030 |
Heb je hulp nodig?
Als je hulp nodig hebt met BlendMount BMG-3030 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden