Blebox actionBoxS Handleiding
Pagina's 4 Smarth home
Bekijk de handleiding van Blebox actionBoxS gratis online of download de PDF. Deze handleiding is 0 keer bekeken. Vraag over dit model? Stel een vraag
Connect only in accordance with the diagram presented in the
2
1
Disconnect the installaon supply voltage before installing the controller.
Remember that any mounng works should be carried out when the mains
voltage is disconnected (switch o the mains fuse or disconnect the power
cord from the mains socket).
The controller should be installed in a place protected against adverse
environmental condions, protected from third party access - in the ush
box or inside the enclosure of the controlled device. Remember that metallic
elements (wires, housing parts) have a negave inuence on the range of
the device, and consequently the comfort of use. It is recommended that
the device be mounted in a stable and xed posion. Due to the operang
voltage of the device it is necessary that the connectors of the controller
be protected against accidental contacts or short circuits, which could cause
electric shock or damage to the device.
Read the diagram and then proceed to install the controller. Pay parcular
aenon to the designaon of the controller connectors. Start with power
wires - phase L (usuallybrown) and neutral N (blue). Then, connect the input
circuit, e.g wall push-buon.
Aer making sure that the device is connected in accordance with the
diagram and that there are no metal components near the controller which
may accidentally cause short-circuit, start the device by turning on the power
(turning on the mains fuse or connecng the power cord to the power outlet).
Download the free wBox applicaon. If you have an Android mobile device,
you will nd the applicaon in the Play Store. For iOS devices the applicaon
is in the App Store.
By using your mobile phone or tablet, connect it to the device wireless
network. To do this, enter to your smartphone or tablet sengs, then go
to seng of the WiFi network and nd the network name “aconBoxS-
xxxxxxxxxx” where xxxxxxxxxx is the serial number of the device. Connect
to this network.
Turn on the wBox applicaon. You will see your device on the main screen.
In order to add it to your applicaon account, select “Add device to account”.
If you are the installer and do not want to assign the device to your account,
select “Use only once”.
Click the buon and download
our free wBox app:
User manual
actionsbox
ONE CHANNEL ACTION TRIGGER 230V
The connecon diagrams can be found at the end of the manual
Go to the WiFi network sengs (“Sengs” icon in the top right corner of
the screen, “Connecon” secon), where you can connect the device to the
home WiFi network to be able to control the device via it or from anywhere
in the world. To do this, select the network name from the list of available
networks and press “Connect”. If required, enter your WiFi password.
When connecng the device to the home network, the phone / tablet may
disconnect from the device’s network.
You can also congure the network sengs using a web browser. Aer
connecng to the controller’s wireless network, turn on the browser and go
to www.blebox.eu
Aer reconnecng the phone to the controller’s WiFi network, check the
“WiFi Client status” and “Remote access status” elds. The controller is
equipped with a network connecon supervision system which in case of
problems with connecon to the WiFi or the Internet will report the problem
and its possible causes. If the network is working properly both elds will be
set to “Connected”.
In order to communicate with the device from outside the local WiFi
network, from anywhere in the world, via the wBox applicaon, the device
automacally connects to the BleBox cloud system service by default. The
remote access system is fully encrypted and secure, the data are transmied
by European servers from reputable companies. It is possible to disable
the remote access service - aer clicking the “Congure” buon, toogle
the switch next to the “Remote access” opon. Remember that disabling
“Remote access” will result in no access to the controller from outside the
local network as well as disabling the nocaons and external integraon
systems, therefore we recommend that you leave this opon enabled (default
seng). event log
Enabling the “Event log” opon will cause the device to record events (e.g.
about sent nocaons set in the “Acons” secon) in the BleBox cloud
system. This allows the history of the events to be viewed later also when
the controller is oine.
Aer compleng the WiFi network conguraon, you can disconnect from
the device network and connect the phone / tablet directly to your home
WiFi network. Control from the wBox applicaon will work in the same way
as when the phone / tablet is connected to the device’s network. If as a
user you leave the local network, eg leaving your home or enclosing mobile
data, the wBox applicaon will signal this status as “Remote mode”. In this
case, you will have access to the device data, but for security reasons sengs
opons will not be available.
In the “Service connecon (AP)” secon, you can change the name and give
the password of the WiFi network emied by the device. Remember that
changing the network name or password can cause disconnecon with the
device immediately aer clicking the “Save” buon, so you should reconnect
to the WiFi network.
It is also possible to completely disable the access point emied by the
device. To do this move the “Access point” slider to the o posion and
conrm the selecon with the “Save” buon.
3
Scan the QR code or click the link below
to access the quick installaon guide.
QUICK INSTALLATION GUIDE
First conguraon of the BleBox controller
hps://blebox.eu/start
Product specificaties
| Merk: | Blebox |
| Categorie: | Smarth home |
| Model: | actionBoxS |
Heb je hulp nodig?
Als je hulp nodig hebt met Blebox actionBoxS stel dan hieronder een vraag en andere gebruikers zullen je antwoorden