Blaupunkt VPC 132 VELOCITY Handleiding

Blaupunkt Autospeaker VPC 132 VELOCITY

Lees hieronder de đź“– handleiding in het Nederlandse voor Blaupunkt VPC 132 VELOCITY (12 pagina's) in de categorie Autospeaker. Deze handleiding was nuttig voor 31 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/12
VPc 132, VPc 172
GB
Notes on installation and operation
D
Hinweise zur Installation und Bedienung
F
Conseils pour l’installation et l’utilisation
SERIES
2
INTRODUCTION
Congratulations on your purchase of the world’s finest brand of car audio speakers.
We have invested tremendous effort in the design process of the new Blaupunkt Velocity-Series
speaker, in order to achieve superior musical performance. For maximum performance and reliability
we highly recommend that your new Blaupunkt Velocity-Series speakers be installed by an authorized
Blaupunkt dealer. By using our Blaupunkt Velocity-Series component speakers and amplifiers you
can be assured of making the best out of your high-quality audio hi-fi system without spoiling the sound
by using components of inferior quality.
For additional information on the Blaupunkt Product Line visit our internet site at:
http://www.blaupunkt.de.
We provide a manufacturer guarantee for our products bought within the European Union. You can
view the guarantee conditions at www.blaupunkt.de or ask for them directly at:
Blaupunkt GmbH
Hotline
Robert Bosch Str. 200
D-31139 Hildesheim
Germany
Safety Considerations
Before starting to mount your speaker, read the mounting and connection instructions carefully.
Disconnect the vehicle battery's negative terminal before making connections.
Be sure to observe the safety notes of the Automobile manufacturer (airbags, alarm systems, onboard
computers, immobilisers). Before drilling holes, look to see what is on the other side- making holes into
the battery, wiring looms or fuse box is not recommended.
Do not mount the speaker onto flexible rear decks (hatchback vehicles) or anywhere where they may
fall for-ward.
SOUND QUALITY VS. LOUDNESS
SOUND QUALITY
A good audio system will faithfully reproduce the original recording by offering accurate frequency
response and staging. Good frequency response reproduces high tones such as cymbals, through
human voices and most instruments, and down to the very low tones from synthesisers and drums.
Frequency response includes timbre (the accurate replication of an instrument), linearity (the tonal
quality is the same regardless of volume level), and clarity (lack of distortion of the original signal).
Blaupunkt Velocity-Series speakers address these properties by having a very smooth frequency
response with low distortion levels.
Good staging offers the illusion of a stage upon which players are located and it has a sense of height,
width, and depth. Imaging is a sound system’s ability to correctly place the instruments on the
imaginary stage. Again, the Blaupunkt Velocity-Series speakers excel here due to angled tweeter
mounting and smooth off-axis frequency response ensuring accurate reproduction.
MULTI-CHANNEL/HIGH POWER
Moving up to a 4x50 watt satellite channel amplifier powering four sets of components and a 2x100 watt
subwoofer amplifier powering a Blaupunkt Velocity-Series subwoofer can offer stunning perfor-
mance!
The increase in amplifier power help reduce ”clipping“ which yields a ”cracking“ type of sound which
can damage nearly any speaker over time. The tonal accuracy of the system is also often improved
because the amplifiers are no longer strained at high listening levels.
GB
3
DEUTSCH ENGLISH
FRANÇAIS
MECHANICAL AND ELECTRICAL INSTALLATION
MOUNTING COMPONENT SPEAKERS
The prime objectives of component speaker mounting are:
• Positioning the speakers correctly.
• Mounting them to a solid surface
• Making sure there are no air leaks between the front and back of the woofers cone
• Protecting the speakers
• Ensuring the wiring is correct
The lower the frequencies a speaker reproduces, the more solid it´s mounting surface must be.
This is necessary because a vibrating panel winds up acting like another loudspeaker and introduces
its own sound into the car. This secondary sound can severely degrade the sound of the music yielding
a ”muffled“ or ”howling“ sound at certain listening levels. A good air seal isolating the sound from the
back of the speaker from the front wave sound is critical. Lack of a good air seal reduces the bass
response and often creates a ”hollow“ sound from the woofer .
The tweeter´s mounting is not nearly so critical since it does not require a rear air seal and it vibrates
very little.
Speaker wiring must be isolated from the electrical system of the car and routed away from any factory
systems to avoid potential noise pickup. Use braided wire with 2.5 to 4 mm2 cable cross section.
FINAL WOOFER INSTALLATION
INSTALLING THE WOOFERS IN FACTORY LOCATIONS
Most of today´s newer cars have speaker grilles which blend in aesthetically with the interior of the car.
The grille is usually held in with small screws or spring clips. To remove a clipped on grille, gently pry
up on the side with a flat blade screwdriver. (Some grilles are an integral part of the door such that the
entire door panel must be removed to expose the speaker.) Once the factory speaker is exposed,
remove the hardware and replace the factory unit with the new Blaupunkt Velocity-Series unit.
REAR DECK MOUNTING
Rear deck or sail panel installations are easily accommodated with these speakers since the woofers
can often drop into factory holes or may require a simple adaptor plate which can be purchased or
formed from wood.
FINAL TWEETER INSTALLATION (see page 8/9)
The biggest advantage of Blaupunkt Velocity-Series component speakers is their ability, when
properly installed, to provide a tonally accurate sound with a wide sound stage but pinpoint localisation
of performers. The largest impact over this sound stage is provided by the tweeter location. To
determine this optimal location we recommend a simple experiment.
1. Complete all of the installation except for the tweeters (i.e., woofers, crossover and wiring).
2. Have a friend sit in the passenger´s seat while you sit in the driver´s seat, each holding a Velocity
tweeter up to the door.
3. With music having good high frequency content, move the tweeters around listening for the best
high frequency response yet maintaining a good left/right acoustical balance in the car.
Mounting the tweeters mid level and as far forward in the door panel is often the best acoustical
location in most cars. In most cases, the preferred location usually has the tweeters facing the
opposite occupant in the car.
4. Enjoy the music, with good tonal balance and good staging in your car.


Product specificaties

Merk: Blaupunkt
Categorie: Autospeaker
Model: VPC 132 VELOCITY

Heb je hulp nodig?

Als je hulp nodig hebt met Blaupunkt VPC 132 VELOCITY stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Autospeaker Blaupunkt

Handleiding Autospeaker

Nieuwste handleidingen voor Autospeaker